Mechanical Properties and Corrosion Resistance of a Novel Economic Mining Chain Steel

Yang Chuntian; Zhai Jiaolong; Kong Xiangwei; Gao Lei; Yin Qing; Wu Xiaolin

doi:10.20057/j.1003-8620.2025-00157

您当前的位置：

首页 >

文章列表页 >

Mechanical Properties and Corrosion Resistance of a Novel Economic Mining Chain Steel

Product Research and Development | 更新时间：2026-03-03

- Mechanical Properties and Corrosion Resistance of a Novel Economic Mining Chain Steel
- Special Steel Vol. 47, Issue 2, Pages: 19-26(2026)
- 作者机构：
  
  江阴兴澄特种钢铁有限公司棒线材研究所，江阴 214400
- 作者简介：
- 基金信息：
- DOI：10.20057/j.1003-8620.2025-00157
  CLC： TG142.1
- Received：27 June 2025，
  
  Published：30 March 2026
- 稿件说明：
移动端阅览
杨纯田,翟蛟龙,孔祥伟等.新型经济型矿用链钢力学与腐蚀性能分析[J].特殊钢,2026,47(02):19-26.

Yang Chuntian,Zhai Jiaolong,Kong Xiangwei,et al.Mechanical Properties and Corrosion Resistance of a Novel Economic Mining Chain Steel[J].Special Steel,2026,47(02):19-26.
杨纯田,翟蛟龙,孔祥伟等.新型经济型矿用链钢力学与腐蚀性能分析[J].特殊钢,2026,47(02):19-26. DOI： 10.20057/j.1003-8620.2025-00157.

Yang Chuntian,Zhai Jiaolong,Kong Xiangwei,et al.Mechanical Properties and Corrosion Resistance of a Novel Economic Mining Chain Steel[J].Special Steel,2026,47(02):19-26. DOI： 10.20057/j.1003-8620.2025-00157.

摘要

常用的矿用链钢23MnNiMoCr54含有较高的Ni、Mo等贵重元素，因而成本较高，限制了广泛应用。本研究通过降低Ni、Mo含量和调控Mn、Cr含量及添加Nb微合金化，设计了一种新型经济性矿用链钢。通过力学性能测试、淬透性试验、均匀腐蚀及应力腐蚀试验，结合链条性能测试，对比分析了新型钢与 23MnNiMoCr54 钢的性能差异。结果表明，新型钢力学性能及淬透性均满足标准的要求；在模拟矿井水中，其均匀腐蚀速率与对照钢无显著差异，应力腐蚀敏感因子及氢脆系数表现更优，抗氢致开裂性能提升；新型钢制成的链条破断负荷达 1 710 kN，疲劳寿命超 6.7×10⁴次，符合 GB/T 12718—2009 中C级链标准。

Abstract

At present the commonly used mining chain steel 23MnNiMoCr54 contains high valuable elements such as Ni and Mo， so the cost is high， which limits its wide application.In this study， a new type of economical mining chain steel was designed by reducing the contents of Ni and Mo， regulating the contents of Mn and Cr， and adding Nb microalloying. Through mechanical property tests， hardenability tests， uniform corrosion and stress corrosion experiments， combined with chain performance tests， the performance differences between the new steel and 23MnNiMoCr54 steel were compared and analyzed. The results show that the mechanical properties and hardenability indexes of the new steel meet the standard requirements. In simulated mine water， its uniform corrosion rate has no significant difference from that of the control steel， while the stress corrosion sensitivity factor and hydrogen embrittlement coefficient are better， and the hydrogen-induced cracking resistance is improved. The chain made of the new steel has a breaking load of 1 710 kN and a fatigue life of more than 6.7×10⁴ cycles， meeting the C-level chain standard in GB/T 12718-2009.

关键词

Keywords

references

卞丽丽，吴　萍，沈思科，等 . 防腐技术在煤矿的应用及管理研究［J］. 煤矿机械， 2004 ， 25 （ 4 ）： 130 - 132 .

Remiorz E ， Mikuła S . The synergy of fatigue， corrosion and abrasive wear processes in operation of mining round link chains ［J］. Archives of Mining Sciences . 2021 ， 66 （ 1 ）： 29 - 42 .

武兴旺，王维喜，马瑞勇，等 . 矿用高强度圆环链用钢的研究进展［J］. 金属热处理， 2008 ， 33 （ 2 ）： 34 - 35 .

赵海东，刘佳兴，张朝磊，等 . 矿用高强度链环钢23MnNiMoCr54奥氏体晶粒长大行为的研究［J］. 特殊钢， 2021 ， 42 （ 2 ）： 10 - 13 .

邢兵辉，黄　亮，李建军，等 . 链环用23MnNiMoCr54合金钢热变形行为与热加工图［J］. 锻压技术， 2025 ， 50 （ 1 ）： 220 - 230 .

林田子，杨　颖，翟晓亮，等 . Nb含量和热变形参数对纵向变截面耐候桥梁钢变形抗力及组织的影响［J］. 特殊钢， 2023 ， 44 （ 4 ）： 108 - 113 .

Bai Y ， Momotani Y ， Chen M C ， et al . Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel ［J］. Materials Science and Engineering： A ， 2016 ， 651 ： 935 - 944 .

Hong S G ， Kang K B ， Park C G . Strain-induced precipitation of NbC in Nb and Nb–Ti microalloyed HSLA steels ［J］. Scripta Materialia ， 2002 ， 46 （ 2 ）： 163 - 168 .

Zhang S Q ， Huang Y H ， Sun B T ， et al . Effect of Nb on hydrogen-induced delayed fracture in high strength hot stamping steels ［J］. Materials Science and Engineering： A ， 2015 ， 626 ： 136 - 143 .

Lin L ， Li B S ， Zhu G M ， et al . Effect of niobium precipitation behavior on microstructure and hydrogen induced cracking of press hardening steel 22MnB5 ［J］. Materials Science and Engineering： A ， 2018 ， 721 ： 38 - 46 .

Cuddy L J . Grain refinement of Nb steels by control of recrystallization during hot rolling ［J］. Metallurgical Transactions A ， 1984 ， 15 （ 1 ）： 87 - 98 .

Miao C L ， Shang C J ， Zurob H S ， et al . Recrystallization， precipitation behaviors， and refinement of austenite grains in high Mn， high Nb steel ［J］. Metallurgical and Materials Transactions A ， 2012 ， 43 （ 2 ）： 665 - 676 .

Charleux M ， Poole W J ， Militzer M ， et al . Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel ［J］. Metallurgical and Materials Transactions A ， 2001 ， 32 （ 7 ）： 1635 - 1647 .

Kamimura T ， Stratmann M . The influence of chromium on the atmospheric corrosion of steel ［J］. Corrosion Science ， 2001 ， 43 （ 3 ）： 429 - 447 .

黄　涛，郭　杰，魏开华，等 . 外加电位条件下X100/X80管线钢的应力腐蚀行为研究［J］. 材料保护， 2023 ， 56 （ 3 ）： 28 - 34 .

Parkins R N . Predictive approaches to stress corrosion cracking failure ［J］. Corrosion Science ， 1980 ， 20 （ 2 ）： 147 - 166 .

褚武扬，乔利杰，李金许，等 . 氢脆和应力腐蚀-基础部分［M］. 北京：科学出版社， 2013 .

Views

137

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Development of QM1020 Salt Bath-Treated Wire Rod for Grade 8.8 Bainitic Non-Quenched-and-Tempered Fastener Steel

Effect of Austenitizing Temperature on Microstructure and Properties of 2 200 MPa Grade Ultra-High Strength Steel

Effect of High-Energy Electrical Pulse Treatment on the Microstructure and Properties of GCr15 Bearing Steel

Effect of High Temperature Tempering on Microstructure and Mechanical Properties of High Nitrogen Martensitic Stainless Bearing Steel

The Effect of Heat Treatment Process on the Hardenability of Gear Steel 20CrMnTiH Containing B

Related Author

Yang Chuntian

Cui Guibo

Hou Jianwei

Zuo Jinzhong

Liu Jinqing

Zou Jianxun

Dai Chang

Zhou Lei

Related Institution

Qingdao Special Steel Co.， Ltd.

Technical Center of Baowu Special Metallurgy Co.， Ltd.

Jiangyin Xingcheng Special Steel Works Co.， Ltd.， Jiangyin

School of Materials Science and Engineering， North University of China

Shanxi Key Laboratory of Advanced Metal Materials for Special Environments

⁰