高氮奥氏体不锈钢的研究进展

特殊钢 ›› 2009, Vol. 30 ›› Issue (4): 45-48.

高氮奥氏体不锈钢的研究进展

刘海定, 王东哲, 魏捍东, 李永友, 胥忠伟, 孙威

国家仪表功能材料工程技术研究中心，重庆仪表材料研究所，重庆400700

收稿日期:2009-02-20 出版日期:2009-08-01 发布日期:2022-12-20
作者简介:刘海定(1979-),男，硕士，工程师，2005年重庆大学毕业，特种合金的研究和开发。

Research Progress in High Nitrogen Austenite Stainless Steel

Liu Haiding,Wang Dongzhe,Wei Handong,Li Yongyou,Xu Zhongwei , Sun Wei

National Engineering Research Center for Instrument Functional Materials, Chongqing Instrument
Materials Research Institute, Chongqing 400700

Received:2009-02-20 Published:2009-08-01 Online:2022-12-20

摘要/Abstract

摘要： 高氮奥氏体不锈钢由于具有强度高、韧性好、无磁、耐腐蚀性能佳及晶间腐蚀敏感性低等诸多独特优点而得到越来越广泛的应用,但基础理论和制造技术方面的研究仍相对落后。文中分析了高氮奥氏体不锈钢的研发历程和冶金理论现状,综述了高氮奥氏体不锈钢的钢种、成分、制造工艺和力学性能,以及该钢的发展与展望。

关键词: 高氮钢, 奥氏体不锈钢, 冶炼工艺, , 力学性能, 发展与展望

Abstract: High nitrogen austenite stainless steel has been more and more widely used in industrial field as it has many distinctive advantages such as high strength, better toughness, non-magnetic, nice corrosion resistance and low sensitiveness on grain-boundary corrosion, but of which the research in basic theory and manufacturing technology are relatively backward. The development history and present status of metallurgical theory of high nitrogen austenite stainless steel are reviewed in this paper, and the steel grade, chemical composition, manufacturing process and mechanical properties of high nitrogen austenite stainless steel and its development and prospect are summarized.

刘海定, 王东哲, 魏捍东, 李永友, 胥忠伟, 孙威. 高氮奥氏体不锈钢的研究进展[J]. 特殊钢, 2009, 30(4): 45-48.

Liu Haiding, Wang Dongzhe, Wei Handong, Li Yongyou, Xu Zhongwei , Sun Wei. Research Progress in High Nitrogen Austenite Stainless Steel[J]. Special Steel, 2009, 30(4): 45-48.

参考文献

1 徐匡迪，高玉来，翟启杰.低镍不锈钢生产中的若干冶金学问题. 钢铁，2004,39(7):1
2 崔大伟，曲选辉，李科.高氮低镍奥氏体不锈钢的研究进展.材料导报，2005,19(12):64
3 Peter JUggowitzer, Ruth Magdowsi,Markus O Speidel. Nickel Free High Nitrogen Austenitic Steels.ISIJ Intenational,1996,36(7):901
4 Takayuki Oshima,Yasuhiro Habara, Kotaro Kuroda.Efforts to Save Nickel in Austenitic Stainless Steels,ISIJ International,2007,47(3):359
5 Simmons JW.Overview:High-nitrogen Alloying of Stainless Steels. Materials Science and Engineering 1996,A207:159
6 Katada Yasuyuki.Current Research Activities of ISU-HNS Research Group in Japan.Proceedings of International Conference on High Ni- trogen Steels 2006,Sichuan,China:45
7 卡曼奇U,曼德里R,贝德威.高氮钢和不锈钢——生产，性能与应用.李晶，黄运华，译.北京：化学工业出版社，2006
8 李花兵，姜周华.不锈钢熔体中氮溶解度的热力学计算模型.东北大学学报(自然科学版),2007,28(5):672
9 尹世友，姜周华，李阳，等.奥氏体不锈钢熔体氮溶解行为的研究.中国冶金，2007,17(3):38
10 袁志钟，戴起勋，程晓农，等.氮在奥氏体不锈钢中的作用.江苏大学学报(自然科学版),2002,23(3):72
11 张峰，李光强，朱诚意，等.氮在液态Fe-Cr-Mn(Ni)系不锈钢中的溶解.材料与冶金学报，2005,4(3):178
12 Balachandran G,Bhatia M L,Ballal N B,et al. Some Theoretical Aspects on Designing Nickel Free High Nitrogen Austenitic Stainless Steels.ISIJ Interantional,2001,41(9):1018
13 肖纪美.不锈钢的金属学问题.北京：冶金工业出版社，2006
14 Balachandran G,Bhatia M L,Ballal N B,et al. Processing Nickel Free High Nitrogen Austenitic Stainless Steels through Conventional Electroslag Remelting Process. ISUJ International,2000,40(5):478
15 Masayuki Tendo,Yutaka Takodoro, Kazuhiro Suetsugu, et al. Effects of Nitrogen, Niobium and Molybdenum on Strengthening of Austenitic Stainless Steel Produced by Thermo-Mechanical Control Process. ISIJ International,2001,41(3):262
16 马玉喜.高氮奥氏体不锈钢组织结构及韧脆转变机制的研究 [博士论文].昆明：昆明理工大学，2008
17 Katsutoshi Orita, Yasumi lkeda,Tadao Iwadate,et al.Development and Production of 18Mn- 18Cr Non-magnetic Retaining Ring with High Yield Strength.ISIJ International,1990,30(8):587
18 Ustinovshikov Y,Ruts A,Bannykh O,et al. Microstructure and Properties of the High-nitrogen Fe-Cr Austenite. Materials Science and Engineering,1999,A262:82
19 Yuji Ikegami,Rikio Nemoto.Effect of Thermo-mechanical Treatment of High-nitrogen Containing Cr-Mn-Ni on Mechanical Properties of Austenitic Stainless Steels. ISIJ Intemational,1996,36(7):855
20 Hans Berns,Sabine Siebert. High Nitrogen Austenitic Cases in Stainless Steels. ISIJ International,1996,36(7):927
21 Satoru Kubota,Yu Xia,Yo Tomota. Work-hardening Behavior and Evolution of Dislocation-microstructures in High-nitrogen Bearing Aus- tenitic Steels. ISIJ International,1998,38(5):474
22 Ridolfi M R,Tassa 0. Formation of Nitrogen Bubbles during the Solidification of 16%- 18% Cr High Nitrogen Austenitic Stainless Steels.Intermetallics,2003,11:1335
23 Schino Di,Kenny J M.Grain Refinement Strengthening of a Microcrystalline High Nitrogen Austenitic Stainless Steel. Materials Letters 2003,57:1830
24 Li Hua-bing,Jiang Zhou-hua, Shen Ming-hui,et al. High Nitrogen Austenitic Stainless Steels Manufactured by Nitrogen Gas Alloying and Adding Nitrided Feroalloys. Journal of Iron and Steel Research, International,2007,14(3):63
25 Nobuo Nakada,Naoki Hirakawa. Toshihiro Tsuchiyama,et al. Grain Refinement of Nickel-free High Nitrogen Austenitic Stainless Steel by Reversion of Eutectoid Structure.Scripta Materialia,2007,57:153
26 Kim Y-S,Nam S-M,Kim S-J.Strain Rate Dependence of Deformation Behavior of High-nitrogen Austenitic Steels.Jounal of Materials Processing Technology,2007,187- 188:575
27 Li Hua-bing,Jiang Zhou-hua,Zhang Zu-mi,et al. Mechanical Properties of Nickel Free High Nitrogen Austenitic Stainless Steels.Pro- ceedings of Sino-Swedish Structural Materials Symposium,2007:330
28 Frechard S,Redjaimia A,Lach E,et al.Dynamical Behaviour and Microstructural Evolution of a Nitrogen-alloyed Austenitic Stainless Steel. Materials Science and Engineering,2008,A 480:89
29 Lee T-H,Oh C-S,Kim S-J,et al.Deformation Twinning in High-nitrogen Sustenitic Stainless Steel. Acta Materialia,2007,55:3649