Φ160 mm 0Cr17Ni4Cu4Nb沉淀硬化不锈钢半连续轧制工艺实践

特殊钢 ›› 2007, Vol. 28 ›› Issue (3): 64-65.

Φ160 mm 0Cr17Ni4Cu4Nb沉淀硬化不锈钢半连续轧制工艺实践

赵德忠

本溪钢铁(集团)公司特殊钢厂，本溪117001

收稿日期:2006-10-19 出版日期:2007-05-01 发布日期:2023-02-04
作者简介:赵德忠(1972-),男，工程师，1997年辽宁工学院毕业，从事加工工艺的研究与管理。

Practice for Semi-Continuous Rolling Process of Φ160 mm 0Cr17N4Cu4Nb Precipitation-Hardening Stainless Steel Bar

Zhao Dezhong

Special Steel Works,Benxi Iron and Steel(Group)CoLtd,Benxi117001

Received:2006-10-19 Published:2007-05-01 Online:2023-02-04

摘要/Abstract

摘要： 本钢特钢厂采用3 t电渣锭-800初轧机开190 mm×190 mm方坯4架650连轧工艺,生产Φ160 mm 0Cr17Ni4Cu4Nb不锈钢棒材以替代原先3 t电渣锭锻造生产工艺。实践表明,轧制工艺生产效率、成材率和钢材表面质量均优于锻制工艺;轧制工艺所生产的中Φ160 mm 0Cr17Ni4Cu4Nb不锈钢σ0.2(Rp_0.2)890～955 MPa.σ_b(R_m) 960～1020 MPa,δ₅(A)16％～18％,Ψ(Z)61％～65％,δ-Fe≤5％均满足GB8732Ⅱ的要求。

关键词: φ160 mm棒材, 0Cr17Ni4Cu4Nb沉淀硬化不锈钢, 半连续轧制, δ-铁素体

Abstract: Φ160 mm 0Cr17Ni4Cu4Nb stainless steel bar products are produced at Special Steel Works,Benxi Steel by 3t ESR ingot-800 primary mill blooming 190 mm×190 mm billet - four stand 650 tandem mill rolling process to replace original 3t ESR ingot -forging process.Practice indicated that production effciency,yield and surface quality of products produced by rolling process were better than that by forging process,the go2(Rpo.2)of中160 mm OCr17Ni4Cu4Nb stainiess steel rolled bar was 890~955 MPa, σ_b(R_m) 960~1020 MPa,δ₅(A)16%～18%,Ψ(Z)61%～65%,δ - Fe≤ 5% all to meet the requirement of standard CB8732Ⅱ .

Key words: Φ160 mm Bar,0Cr17Ni4Cu4Nb Precipitation -Hardening Stainless Steel,Semi - Continuous Rollin, δ-Ferrite

赵德忠. Φ160 mm 0Cr17Ni4Cu4Nb沉淀硬化不锈钢半连续轧制工艺实践[J]. 特殊钢, 2007, 28(3): 64-65.

Zhao Dezhong. Practice for Semi-Continuous Rolling Process of Φ160 mm 0Cr17N4Cu4Nb Precipitation-Hardening Stainless Steel Bar[J]. Special Steel, 2007, 28(3): 64-65.

[1]	张国忠, 窦志超, 王正, 闵杰, 黄大兵. P92无缝钢管内表面裂纹分析及工艺优化[J]. 特殊钢, 2023, 44(2): 65-69.
[2]	唐科, 彭俊, 付克刚, 朱萍, 向鑫, 廖凯. SUS410半马氏体不锈钢厚壁无缝管内表面裂纹缺陷分析及工艺改进[J]. 特殊钢, 2021, 42(5): 46-48.