Φ200mm H11芯棒钢热连轧过程张力影响因素的有限元分析

特殊钢 ›› 2006, Vol. 27 ›› Issue (3): 5-7.

Φ200mm H11芯棒钢热连轧过程张力影响因素的有限元分析

洪慧平¹，程满¹，康永林¹，冯长桃²，陈溪强²

1北京科技大学材料科学与工程学院，北京100083 ;
2宝山钢铁股份有限公司，上海201900

收稿日期:2005-12-30 出版日期:2006-05-08 发布日期:2023-03-09
作者简介:洪慧平(1963-),男，博士，副教授,从事材料加工计算机辅助工程与模拟仿真优化教学与科研。

Finite Element Analysis of Influence Parameters on Tension of Φ200 mm H11 Steel Round Bar for Mandrel during Hot Continuous Rolling

Hong Huiping¹, Cheng Man¹, Kang Yonglin¹ , Feng Changtao²，Chen Xiqiang²

1 School of materials Science and Engineering, University of Science and Technology, Beijing 100083;
2 Baoshan Iron and Steel Co Ltd, Shanghai 201900

Received:2005-12-30 Published:2006-05-08 Online:2023-03-09

摘要/Abstract

摘要： 应用MSC.MARC三维热力耦合弹塑性大变形有限元法及其接触分析技术,仿真研究了Φ200mm H11芯棒钢热连轧过程。分析得出,降低末道次轧辊速度V_r,会增强道次间的堆钢程度;提高末道次轧辊转速V_r,会增强道次间的拉钢程度;可通过合理修正V_r值来改善堆、拉钢关系以及轧制负荷变化和轧材宽展量,以提高圆钢成品精度。提出大规格圆钢热连轧过程应采用微堆钢轧制技术,以保持轧制力、力矩稳定和满足轧材尺寸精度要求。

关键词: Φ200mm圆钢, 热连轧, 张力, 有限元分析

Abstract: The hot continuous rolling process of 効00 mm Hll steel round bar for mandrel has been simulated and studied by using MSC. MARC 3- dimensional thermo-mechanical coupled elasto-plastic finite element method (FEM) and contact analysis technique. It is obtained by analysis that with decreasing last pass roller speed Vr the compression extent between passes increased; with increasing last pass roller speed V_r the tensile extent between passes increased; therefore it is available to modify the relation between compression and tensile, the rolling load change and the widening extent of rolling products by change V_r value in order to increase the product dimension precision. It is concluded that the light compression technology between passes shall be adopted during heavy round steel continuous rolling to keep the stability of rolling load and torque and guarantee the requirement of product dimension precision.

Key words: Φ200 mm Round Steel, Hot Continuous Rolling, Tension, Finite Element Analysis

洪慧平, 程满, 康永林, 冯长桃, 陈溪强. Φ200mm H11芯棒钢热连轧过程张力影响因素的有限元分析[J]. 特殊钢, 2006, 27(3): 5-7.

Hong Huiping, Cheng Man, Kang Yonglin , Feng Changtao, Chen Xiqiang. Finite Element Analysis of Influence Parameters on Tension of Φ200 mm H11 Steel Round Bar for Mandrel during Hot Continuous Rolling[J]. Special Steel, 2006, 27(3): 5-7.

[1]	马少晨, 袁志鹏, 张彩军. 高拉速薄板坯保护渣剪切变稀行为和表面性质[J]. 特殊钢, 2024, 45(5): 76-84.
[2]	刘立, 赵俊学, 李献民, 丁五洲, 陈峰, 李小孟. CaF₂-CaO-Al₂O₃-SiO₂-MgO五元渣的表面张力及其在镍基合金电渣重熔的应用[J]. 特殊钢, 2015, 36(6): 20-22.
[3]	李小龙, 周敦世, 冯亮. GCrl5轴承钢ø130 mm棒材热连轧过程轧制力的数值模拟和分析[J]. 特殊钢, 2015, 36(1): 5-8.
[4]	曹玉龙, 姜周华. 电渣重熔用含氟渣系界面性质的研究进展[J]. 特殊钢, 2014, 35(3): 19-23.
[5]	肖玉, 洪慧平, 冯富春. 20CrMnTi齿轮钢棒材热连轧有限元模拟[J]. 特殊钢, 2014, 35(2): 16-19.
[6]	刘升, 张振兴, 龚娜, 洪玫, 商贵芳, 金巧. 热轧U型钢板桩精轧过程金属流动行为的有限元分析[J]. 特殊钢, 2013, 34(5): 1-4.
[7]	高亚男, 张艳菊, 郝瑞朝, 肖宏, 张高悦. 推/张力轧制不锈钢/碳钢复合钢筋的有限元模拟与实验研究[J]. 特殊钢, 2013, 34(4): 5-9.
[8]	董丽丽, 邢淑清, 姜晓艳, 麻永林. 张力对冷轧304奥氏体不锈钢薄板板形影响的数值模拟[J]. 特殊钢, 2012, 33(3): 4-7.
[9]	薛春江, 章昕. 热卷箱技术在不锈钢热连轧生产中的应用进展[J]. 特殊钢, 2011, 32(4): 23-25.
[10]	岑耀东. 热镀锌卷尾部塔形缺陷的分析和预防措施[J]. 特殊钢, 2011, 32(4): 39-41.
[11]	王刚. 热卷箱在2250热连轧不锈钢带生产中的应用[J]. 特殊钢, 2010, 31(6): 47-49.
[12]	陈艳霞, 周雄. 165 mm×165 mm方坯连铸结晶器安全性的数值模拟分析[J]. 特殊钢, 2010, 31(5): 11-13.
[13]	李国平, 张威, 李俊, 范新智. 防止S31803双相钢5 mm热连轧卷板边裂的工艺实践[J]. 特殊钢, 2010, 31(1): 36-37.
[14]	李秀莲, 苟复钢. 微张力减径机孔型设计对45钢厚壁管“内六方”的影响[J]. 特殊钢, 2009, 30(6): 20-22.
[15]	周正军, 张扬, 张云祥. 2250 mm宽带热连轧层流冷却模型的参数优化[J]. 特殊钢, 2009, 30(2): 40-42.