钢的软接触电磁连铸技术的研究进展

特殊钢 ›› 2005, Vol. 26 ›› Issue (4): 29-32.

钢的软接触电磁连铸技术的研究进展

王宏明,李家旺,徐明喜,李桂荣

江苏大学材料科学与工程学院，镇江212013

收稿日期:2005-01-19 出版日期:2005-08-01 发布日期:2023-05-17
作者简介:王宏明(1974-),男，讲师，上海大学博士生,2001年包头钢铁学院硕士毕业,从事炼钢和连铸技术研究。

Advance in Research of Soft-Contact Electromagnetic Continuous Casting Technology for Steel

Wang Hongming, Li Jiawang, Xu Mingxi , Li Guirong

School of Material Science and Engineering, Jiangsu University, Zhenjiang 212013

Received:2005-01-19 Published:2005-08-01 Online:2023-05-17

摘要/Abstract

摘要： 钢的软接触电磁连铸技术(SoftContactElectromagneticContinuousCasting)是利用高频交变电磁场在结晶器内铸坯初始凝固区施加电磁压力来减少钢液与结晶器壁的接触压力,从而减小结晶器振动对铸坯表面质量的影响,降低拉坯阻力和减弱初始凝固点的传热来提高铸坯表面质量。分析了实现钢的软接触电磁连铸在结晶器结构、材质以及电磁场参数等方面需要解决的问题,并介绍了该技术的最新研究成果:高频调幅磁场及无结晶器振动的电磁连铸技术。

Abstract: The soft-contact electromagnetic continuous casting for steel is a technology using high frequency alternating electromagnetic field to load a electromagnetic force on initial solidification zone of billet in mold decrease contact pressure between liquid steel and mold wall, thus reducing the effect of mold oscillation on surface quality of billet, decreasing billet casting friction drag and lowering heat transfer at initial solidification point to advance the surface quality of billet. The issues that need to be resolved including structure and material of mold and parameters of electromagnetic field to realize soft-contact electromagnetic continuous casting are analyzed and the latest research outcomes- high-frequency amplitude- modulated field and mold oscillation-less electromagnetic continuous casting are presented in this paper.

王宏明, 李家旺, 徐明喜, 李桂荣. 钢的软接触电磁连铸技术的研究进展[J]. 特殊钢, 2005, 26(4): 29-32.

Wang Hongming, Li Jiawang, Xu Mingxi , Li Guirong. Advance in Research of Soft-Contact Electromagnetic Continuous Casting Technology for Steel[J]. Special Steel, 2005, 26(4): 29-32.

参考文献

1 Vives C. Electromagnetic Refining of Aluminum Alloys by the CREM Process: Part I. Working Principle and Metallurgical Results, Metallurgical and Materials Transactions B, 1989,20B( 10):623
2 Tanaka T,Kurita K, Kuroda A. Mathematical Modeling for electromagnetic Field and Shaping of Melts in Cold Crucible. ISIJ Intematicxia), 1991,31(4):350
3 Nakata H, Kokita M,Morisita M,et al. Improvement of Surface Quality rf Steel by Electromagnetic Mold, International Symposium on Electromagnetic Processing of Material. ISIJ International ,1994,34(3): 161
4 Park J, Sim D, Jeong H, et al. Effect of High Frequency Electromagnetic Field on Continuously Cast Billet. ISU Internationa], 1999, 39 (12):57
5 任忠鸣，董华锋，邓康，等.软接触结晶器电磁连铸中初始凝固的基础研究.金属学报，1999,35(8):851
6 Park J, Kim H, Jeong H, et al. Initial Solidification Control Continuous Casting Using Electromagnetic Oscillation Method. ISIJ International, 2003,43(6): 807
7 Nakata H, Inoue T, Mort H, et al. Improvement of Billet Surface Quality by Ultra-high-frequency Electromagnetic Casting. ISIJ International, 2002,42(3):264
8 Kim H, Park J, Jeong H, et al. Continuous Casting of Billet with High Frequency Electromagnetic Field. ISIJ International,2002,42(2): 171
9 于光伟，贾光霖,王恩刚，等、方坯软接触电磁连铸实验研究、钢铁,2002,37(5):19
10 雷作胜，任忠鸣,阎勇刚，等软接触结晶器电磁连铸保护渣道的动态压力.金属学报,2004(5):546
11 周月明，张永杰、软接触电磁连铸技术及工业应用前景.宝钢技术,2003(1):1
12 董华锋，任忠鸣,钟云波，等.软接触结晶器电磁连铸中磁场的均匀化.钢铁研究学报,1998,10(2) ：5
13 王玮，王强,邓安元，等.钢的软接触电磁连铸结晶器的研究进展.铸造,2003,52⑹：379
14 于光伟，贾光霖,王恩刚，等.方坯软接触电磁连铸初始凝固区髙频磁场的分布.金属学报,2002(2):208
15 李廷举，佐佐健介，浅井滋生.间断高频磁场作用下连铸铸型内金属液的运动和铸坯的表面质量.金属学报，1997,33(5)： 524
16 任忠鸣，邓康,周月明，等.软接触电磁连铸结晶器.中国专利 96222452,1996.9
17 钱忠东，李本文,赫冀成.电磁连铸复合式结晶器内电磁场的数值模拟.东北大学学报,2001,22(1):79
18 Suzuki T, Shibata T, Mori H. The S]it2 Less Mold with the Composite Material for the Electromagnetic Casting. The 3rd International Symposium on Electromagnetic Processing of Materials EPM 2000. Nagoya, Japan, ISIJ International,2000,402
19 雷作胜.连铸坯表面振痕形成机理及其电磁控制技术.上海大学博士学位论文,2004
20 Lei Zuosheng, Ren Zhongming.Deng Kang,et al. Experimental Study on Mold Oscillation-less Continuous Casting Process under High Frequency Amplitude-modulated Magnetic Field, ISU International, 20M,44(ll)：1842
21 Sumi Ikuhiro, Shimizu Hiroshi, Nishioka Shinichi. Initial Solidification Control of Continuous Casting Using Electromagnetic Oscillation Method. ISU Intematiwial,2003,43(6) ：807