ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2020, Vol. 41 ›› Issue (2): 15-17.

• 工艺技术 • 上一篇    下一篇

Si含量对10B21钢热轧盘条组织和性能的影响

李世琳1,2阮士朋1,2   

  1. 1邢台钢铁有限责任公司技术中心,邢台054027 ;
    2河北省线材工程技术研究中心,邢台054027
  • 收稿日期:2019-09-12 出版日期:2020-04-01 发布日期:2022-04-21
  • 作者简介:李世琳(1982-),女,硕士(四川大学),高级工程师,河北工业大学(本科)毕业,线材产品研发。

Effect of Si Content on Structure and Properties of 10B21 Steel Hot-Rolled Coil

Li Shilin1,2, Ruan Shipeng11,2   

  1. 1 Technology Center,Xingtai Iron and Steel Corp Ltd,Xingtai 054027;
    2 Hebei Province Engineering and Technology Research Center for Wire Rod, Xingtai 054027
  • Received:2019-09-12 Published:2020-04-01 Online:2022-04-21

摘要: 分析和研究了0.03%~0.21%Si含量对含硼冷镦钢10B21 (/%:0.20C,0.03~0.21Si,0.82~0.83Mn,0.009~0.013S,0.015~0.016P,0.0019~0.0020B)Φ34 mm热轧盘条组织和性能的影响。盘条热轧的终轧温度为900℃,缓冷。结果表明,Si含量由0.03%增加到0.21%,10B21钢盘条抗拉强度由480MPa增加到489MPa,即增加了9MPa;HRB硬度值增加5.3,钢的组织中铁素体团尺寸由52μm降低至42μm,非金属夹杂物尺寸及数量无明显变化,淬透性能提高。

Abstract: The effect of 0. 03% —0. 21% Si on structure and properties of 10B21 cold heading steel of containig boron (/% :0.20C,0.03 〜0,21Si,0. 82 ~0. 83Mn,0, 009 〜0. 013S,0. 015 〜0. 016P,0.0019 ~ 0.0020B)Φ34 mm hot- rolled coil has been analyzed and studied. The end-rolling temperature of hot-rolling coil is 900℃ ,slow-cooling. Results show that with increasing Si content in 10B21 steel from 0. 03% to 0. 21% , the tensile strength of coil increasing from 480 MPa to 489 MPa, i. e. that increases by 9 MPa; the HRB hardness value increases by 5. 3 ; the size of ferrite groups in structure of steel reduces from 52μm; to 42 μm; the size and quantity of non-metallic inclusions has no obvious change ; and the hardenability of steel improves.