CSP流程生产Q345B钢带的机械性能和强化因素分析

张云祥; 赵嘉蓉; 张海鸥; 王桂兰

您当前的位置：

首页 >

文章列表页 >

CSP流程生产Q345B钢带的机械性能和强化因素分析

试验研究 | 更新时间：2026-01-21

- CSP流程生产Q345B钢带的机械性能和强化因素分析
- An Analysis on Strengthening Factors and Mechanical Properties of Q345B Steel Strip Produced by CSP Process
- 特殊钢 2007年28卷第1期页码：24-25
- 作者机构：
  
  1. 武汉科技大学材料与冶金学院,武汉,430081
  2. 华中科技大学材料学院,武汉,430074
- 作者简介：
  
  [ "张云祥(1970-),男，讲师，武汉科技大学毕业，材料成型与控制工程。" ]
- 基金信息：
- DOI：
  中图分类号：
- 收稿：2006-07-06，
  
  网络首发：2023-01-13，
  
  纸质出版：2007-01-13
- 稿件说明：
移动端阅览
张云祥, 赵嘉蓉, 张海鸥, 等. CSP流程生产Q345B钢带的机械性能和强化因素分析[J]. 特殊钢, 2007,28(1):24-25.

张云祥, 赵嘉蓉, 张海鸥, et al. An Analysis on Strengthening Factors and Mechanical Properties of Q345B Steel Strip Produced by CSP Process[J]. Special Steel, 2007, 28(1): 24-25.
张云祥, 赵嘉蓉, 张海鸥, 等. CSP流程生产Q345B钢带的机械性能和强化因素分析[J]. 特殊钢, 2007,28(1):24-25. DOI：

张云祥, 赵嘉蓉, 张海鸥, et al. An Analysis on Strengthening Factors and Mechanical Properties of Q345B Steel Strip Produced by CSP Process[J]. Special Steel, 2007, 28(1): 24-25. DOI：

摘要

通过定量金相和产品力学性能统计分析了CSP工艺(71 mm铸坯)和常规工艺(250 mm铸坯)生产的 Q345B钢2.0~12.7mm板卷组织和晶粒特征、屈强比(YS-UTS)和延伸率。结果表明，CSP工艺生产的板卷的晶粒尺寸为7.03~8.78 μm

晶粒度级别11.5～12.0

平均屈强比为0.77

延伸率为27.8%

较常规工艺生产的板卷高 (分别为8.79~8.95 μm

10.0～10.5

0.72和25.0%)。计算结果表明，CSP热轧低碳钢板卷细晶强化和沉淀强化占59%

常规工艺该项占55%。

Abstract

The characteristics of structure and grain

yield strength -ultimate tensile strength(YS-UTS)xatio

and c longation of 2.0～12.7 mm steel Q345B strip produced by CSP process(71 mm cast slab)and conventional process(250 mm cast slab)have been analyzed by quantimet and statistic of product mechanical properties.The results indicated that the grain size of strip produced by CSP process was7.03~8.78 μm

grain size rating 11.5～12.0

average YS-UTS ratio 0.77 and elongation 27.8% which were higher than that by conventional process(respectively8.79～8.95 μm

10.0~ 10.5

0.72 and 25.0%).Calculated results show that the contributions of fine grain strengthening and precipitation strengthening of low carbon steel strip produced by CSP process make up 59% of all strengthening factors

while that by conventional process make up 55% of all factors.

关键词

Keywords

references

浏览量

下载量

CSCD

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Zr微合金化HSLA钢粗晶热影响区的组织和性能

形变对无取向硅钢50W470组织和力学性能的影响

冷轧和固溶处理对改进型202不锈钢组织和力学性能的影响

CSP-低碳钢DC03冷轧板的组织和织构

退火工艺对0.17C冷轧链条用钢板组织和性能的影响