1. 北京科技大学冶金与生态工程学院,北京,100083
2. 新兴铸管股份有限公司,武安,056300
3. 湖北新冶钢有限公司,黄石,435001
[ "汪玉娇(1987-),女,研究生,2009年安徽工业大学毕业,钢厂粉尘特性及再资源化利用研究。" ]
收稿:2011-05-03,
网络首发:2022-11-01,
纸质出版:2011-11-01
移动端阅览
汪玉娇, 范新有, 李士琦, 等. 新冶钢电弧炉粉尘精细还原实验研究[J]. 特殊钢, 2011,32(5):18-21.
汪玉娇, 范新有, 李士琦, et al. Experimental Research on Fine Reduction of EAF Dust at Xinyesteel[J]. Special Steel, 2011, 32(5): 18-21.
对烘干后的电弧炉干粉尘进行基础特性研究
包括化学成分、XRD(X-ray diffraction)检测、粒度分布。根据铁氧化物、锌氧化物的还原热力学原理
提出了"电弧炉粉尘精细还原"的概念。探讨温度(910~1 010℃)和还原时间(2~4h)对电弧炉粉尘金属化率和脱锌率的影响
并利用SPSS(Statistical Product and Service Solutions)软件对实验结果进行方差分析和相关性分析结果表明
电弧炉粉尘TFe含量为47.26%
Zn含量为8.32%;在910~1010℃
使用纯H2对电弧炉粉尘进行精细还原
能实现铁氧化物和锌氧化物分别向MFe和Zn的转变
金属化率和脱锌率分别达到95%、98%左右;同时电弧炉粉尘精细还原的产物未有烧结现象发生。
A study on basic characteristics of baked EAF dust including chemical composition
X-ray diffraction detection
and particle-size distribution has been carried out. Based on thermodynamic principles of iron oxide and zinc oxide redaction
the concept of fine reduction of EAF dust is put forward. The effect of temperature (910 ~ 1 010 °C ) and reduction time (2 ~4 h) on ratio of metallization and ratio of de-zinc to EAF dust
and the variance analysis and correlation analysis on test results have been carried out by using Statistical Product and Service Solutions (SPSS) software. Results show that TFe content and Zn content in EAF dust are respectively 47. 26% and 8. 32% ; at 910 ~ 1 010 °C the iron oxide and zinc oxide transforming to MFe and zinc is realized with using pure to fine reduce EAF dust
and the ratio of metallization and ratio of de-zinc are respectively 95% and 98% ; and the phenomenon of sintering EAF dust fine reduction product has not occurred.
0
浏览量
0
下载量
0
CSCD
0
CNKI被引量
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621