A Study on Deep Desulphurization of Low Carbon Steel by High Magnesium Calcium Aluminate Premelted Refining Slag Combined with Synthetic Slag and Adding Al
朱子江, 李文平, 雷泽龙, et al. A Study on Deep Desulphurization of Low Carbon Steel by High Magnesium Calcium Aluminate Premelted Refining Slag Combined with Synthetic Slag and Adding Al[J]. Special Steel, 2013, 34(4): 13-18.
朱子江, 李文平, 雷泽龙, et al. A Study on Deep Desulphurization of Low Carbon Steel by High Magnesium Calcium Aluminate Premelted Refining Slag Combined with Synthetic Slag and Adding Al[J]. Special Steel, 2013, 34(4): 13-18.DOI:
The deep desulphurization test on low carbon steel (/%: 0. 06C. 0. 20Si
1. 20Mn
0. 020Nb
0. 015Ti) with initial (74 ~ 167) x 10
-6
[
S
]
is carried out by 20% ~40% high magnesium calcium aluminate premelted slag (/% : 5SiO2
37CaO
42Al
2
O
3
13MgO
3FeO) combined with 60% 〜80% synthetic slag (/%: 10SiO
2
61CaO
25Al
2
O
3
4MgO) and adding 5 ~ 10 g/kg Al in a 10 kg induction furnace. Results show that during refining the sulfur content in liquid decreases to lowest value in 10 min
with gradually increasing oxygen activity in liquid and decreasing sulfi
de capacity of slag in refining process the sulfur distribution ratio between slag and liquid decreases and the phenomenon of definite resulphurization in liquid occurs ; the larger aluminum addition
lower initial sulfur content in liquid and higher sulfide capacity of slag are favorable for desulphurization reaction and to inhabit resulphurization ; the desulphurization effect of 20% high magnesium calcium aluminate +80% synthetic slag is better and with controlling refining slag ingredient (/% ) 50 ~ 60CaO
5 ~7MgO
28 ~32Al
2
O
3
~ 8SiO
2
and adding 3 g/kg Al the sulfur content in steel could decrease to 0. 001 6%.