1.辽宁省检验检测认证中心,沈阳 110000
2.鞍钢股份公司炼铁总厂研究院,鞍山 114051
辽宁科技大学材料与冶金学院,鞍山 114051
3.School of Materials and
Metallurgy, University of Science and Technology Liaoning, Anshan 114051, China
陈文(1988―),硕士,工程师;E-mail: 806661666@qq.com;
杨鑫(1987―),博士,讲师;E-mail: 15841693946@163.com。
收稿:2023-06-28,
纸质出版:2023-12-01
移动端阅览
陈文,薛俊海,张海明等.铬质引流砂与镁碳质滑动水口界面润湿行为[J].特殊钢,2023,44(06):58-62.
Chen Wen,Xue Junhai,Zhang Haiming,et al.Study on Interface Wetting Behavior Between Chrome Drainage Sand and Magnesia Carbon Sliding Nozzle[J].Special Steel,2023,44(06):58-62.
陈文,薛俊海,张海明等.铬质引流砂与镁碳质滑动水口界面润湿行为[J].特殊钢,2023,44(06):58-62. DOI: 10.20057/j.1003-8620.2023-00130.
Chen Wen,Xue Junhai,Zhang Haiming,et al.Study on Interface Wetting Behavior Between Chrome Drainage Sand and Magnesia Carbon Sliding Nozzle[J].Special Steel,2023,44(06):58-62. DOI: 10.20057/j.1003-8620.2023-00130.
以某钢厂连铸用铬质引流砂为研究对象,采取经典的滴落法研究常用铬质引流砂对滑动水口材料(以MgO-C材料为主)的润湿、侵蚀行为的影响,探究铬质引流砂对滑动水口材料润湿和侵蚀机制。研究结果表明,铬质引流砂对MgO-C耐火材料的侵蚀程度较为严重,铬质引流砂中Cr、Si元素可通过溶解、扩散的方式进入MgO-C耐火材料内部,并对耐材基体造成侵蚀。针对本实验使用的铬质引流砂(
w
[C]为6%左右)来说,
w
[C]=12%的MgO-C耐火材料与引流砂接触角为71.9°,比
w
[C]=8%的MgO-C耐火材料与引流砂接触角为93.9°更容易被引流砂润湿和侵蚀,因此,在使用此铬质引流砂进行连铸生产时,尽可能选择使用C含量低的滑动水口更利于浇注顺行。
Taking the chromium drainage sand for continuous casting of a steel plant as the research object, the classical drop method is adopted to study the influence of the commonly used chromium drainage sand on the wetting and erosion behavior of the sliding water inlet material (mainly MgO-C material), and to explore the wetting and erosion mechanism of chromium drainage sand on sliding nozzle materials.The results show that the erosion degree of chromium drainage sand on MgO-C refractory is more serious, Cr and Si elements in chromium drainage sand can enter the MgO-C refractory through dissolution and diffusion, and cause damage to the refractory matrix.For the chromium drainage sand (
w
[C] is about 6%) used in this experiment, MgO-C refractory with 12% carbon content and the contact angle 71.9°with drainage sand is more prone to wetting and erosion by drainage sand than MgO-C refractory with 8% carbon content and the contact angle 93.9°with drainage sand. Therefore, sliding nozzle materials with low carbon content should be selected as far as possible when using this chromium drainage sand for continuous casting production,which is more conducive to the smooth casting.
邢守渭 , 周川生 . 连铸用中高档耐火材料的研究开发和使用 [J]. 特殊钢 , 1991 , 12 ( 1 ): 25 - 32 .
李霞 , 杨利荣 . 天津钢管公司连铸耐火材料的使用和改进 [J]. 特殊钢 , 2002 , 23 ( 4 ): 49 - 50 .
邓志银 , 彭朋 , 朱苗勇 . 钢包引流砂烧结与钢包自动开浇率提升研究进展 [J]. 钢铁 , 2022 , 57 ( 1 ): 1 - 12 .
Farshidfar F , Kakroudi M G . Effect of chromite-silica sands characteristics on performance of ladle filler sands for continuous casting [J]. Journal of Iron and Steel Research , International, 2012 , 19 ( 3 ): 11 - 19 .
Kobayashi Y , Todoroki H , Kirihara Fet al . Sintering behavior of silica filler sands for sliding nozzle in a ladle [J]. ISIJ International , 2014 , 54 ( 8 ): 1823 - 1829 .
Tseng T T , Wu H M , Chen C N , et al . Refractory filler sands with core-shell composite structure for the taphole nozzle in slide-gate system of steel ladles [J]. Ceramics International , 2012 , 38 ( 2 ): 967 - 971 .
邓魏凯 , 杨博然 , 郭栩萍 , 等 . 氧化铝对铬质引流砂烧结行为的影响 [J]. 中国冶金 , 2022 , 32 ( 8 ): 32 - 39 .
Tani K , Ueda Y , Mori S . Interfacial reaction between cast steel and olivine sand or silica sand [J]. Transactions of the Iron and Steel Institute of Japan , 1987 , 27 ( 3 ): 197 - 204
邓志银 , 朱苗勇 . 合金钢中MnO/FeO大型夹杂物来源分析 [J]. 钢铁 , 2018 , 53 ( 2 ): 27 - 28 .
康铭 , 杨杰 , 孔令种 , 等 . 影响连铸钢包自开率因素的分析 [J]. 特殊钢 , 2022 , 43 ( 3 ): 1 - 6 .
曹磊 , 石永亮 , 马保振 , 等 . TRIZ理论在改善引流砂对钢液危害中的应用 [J]. 耐火材料 , 2021 , 55 ( 6 ): 517 - 521 .
张闯 , 周俐 , 朱李艳 , 等 . 钢包引流砂对中间包钢液洁净度的影响 [J]. 连铸 , 2017 , 42 ( 6 ): 46 - 49 .
Mukai K , Tao Z N , Goto K , et al . In-situ observation of slag penetration into MgO refractory [J]. Scandinavian Journal of Metallurgy , 2002 , 31 ( 1 ): 68 - 78 .
0
浏览量
0
下载量
0
CSCD
0
CNKI被引量
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621