宝武特种冶金有限公司技术中心,上海 200940
王玉(1995—),男,硕士,助理研究员;E-mail:790022@baosteel.com
收稿:2023-07-03,
纸质出版:2024-03-30
移动端阅览
王玉,姚瑶,田玉新.高温形变参数对4J32超因瓦合金组织演变的影响[J].特殊钢,2024,45(02):96-100.
Wang Yu,Yao Yao,Tian Yuxin.Effect of High Temperature Deformation Parameters on Microstructure Evolution of 4J32 Super Invar Alloy[J].Special Steel,2024,45(02):96-100.
王玉,姚瑶,田玉新.高温形变参数对4J32超因瓦合金组织演变的影响[J].特殊钢,2024,45(02):96-100. DOI: 10.20057/j.1003-8620.2023-00136.
Wang Yu,Yao Yao,Tian Yuxin.Effect of High Temperature Deformation Parameters on Microstructure Evolution of 4J32 Super Invar Alloy[J].Special Steel,2024,45(02):96-100. DOI: 10.20057/j.1003-8620.2023-00136.
使用热模拟压缩试验仪器,设置850~1 150 ℃不同应变温度和0.1~10 s
-1
应变速率等热变形参数进行试验,通过金相显微镜、热模拟试验等设备对合金进行组织形貌表征,结合热模拟压缩试验应力应变曲线及合金组织形貌进行分析,系统性研究4J32超因瓦合金(Fe-32Ni-4Co)在850~1 150 ℃高温热变形行为及组织形貌演变过程。研究发现,4J32超因瓦合金在900 ℃以下热变形过程不发生动态再结晶,且合金中存在大量的变形晶粒组织。当热变形温度大于1 050 ℃时,合金开始发生动态再结晶,且应变速率越快其动态再结晶程度越高。研究结果表明,超因瓦合金最优的热变形温度>1 100 ℃,应变速率为10 s
-1
。
The microstructure and morphology of the alloy were characterized by metallographic microscope and thermal simulation test and other equipment, and the thermal deformation parameters were set at different strain temperatures of 850-1 150 ℃ and strain rates of 0.1-10 s
-1
. It was analyzed by combining the stress-strain curve of thermal simulation compression test and the microstructure morphology, the thermal deformation behavior and microsturcture morphology evolution process of 4J32 super invar alloy (Fe-32Ni-4Co) at high temperature 850-1 150 ℃ were systematically studied. It is found that no dynamic recrystallization occurs during hot deformation of 4J32 super invar alloy below 900 ℃, and there are a lot of deformed grain structures in the alloy. When the thermal deformation temperature is greater than 1 050 ℃, the dynamic recrystallization of the alloy begins, and the faster the strain rate, the higher the dynamic recrystallization degree. The results show that the optimum thermal deformation temperature of super invar alloy is greater than 1 100 ℃ and the strain rate is 10 s
-1
.
鲁宏 , 戴魏魏 , 蒋立鹤 , 等 . 镍基耐热合金热变形行为的研究现状 [J]. 世界有色金属 , 2019 , 10 ( 9 ): 171 - 173 .
李莎 , 赵振铎 , 王贵平 . N08800铁镍基合金热变形行为及组织演变 [J]. 特殊钢 , 2021 , 42 ( 5 ): 16 - 20 .
袁均平 . 变形及热处理对因瓦合金组织与性能的影响 [D]. 长沙 : 中南大学 , 2005 .
沈婕 , 王晓军 , 夏天东 . 因瓦效应及因瓦合金的研究现状 [J]. 功能材料 , 2007 , 38 ( A08 ): 3198 - 3201 .
津田正臣 . Fe-36% Ni インバー合金の熱膨張係数に及ぼす微量合金元素の影響 [J]. 鐵と鋼: 日本鐡鋼協會々誌 , 1994 , 80 ( 12 ): 944 - 949 .
Kim B S , Yoo K J , Kim B G , et al . Effect of carbon on the coefficient of thermal expansion of as-cast Fe- 30wt.% Ni- 12.5 wt.% Co-× C invar alloys [J]. Metals and Materials International , 2002 , 8 ( 3 ): 247 - 252 .
杨康 , 祝志超 , 张雪姣 , 等 . 镍基617合金的热变形和动态再结晶行为 [J]. 材料热处理学报 , 2019 , 40 ( 10 ): 151 - 157 .
杨金龙 , 马向东 , 李远 , 等 . 一种新型镍基粉末高温合金不同状态热变形行为 [J]. 稀有金属材料与工程 , 2022 , 51 ( 2 ): 651 - 660 .
李烁 , 闫森 , 金奎文 , 等 . 碳含量及热加工变形量对镍基合金GH3625组织和性能的影响 [J]. 特殊钢 , 2022 , 43 ( 2 ): 75 - 78 .
霍万晨 , 刘建涛 , 张明 , 等 . 一种新型镍基粉末高温合金热变形行为研究 [J]. 粉末冶金工业 , 2021 , 31 ( 6 ): 104 - 109 .
Lu Hai tao , Li Da zhao , Li Siyuan , et.al . Hot deformation behavior of Fe-27.34Mn-8.63Al-1.03C lightweight steel [J]. International Journal of Minerals, Metallurgy and Materials , 2023 , 30 ( 4 ): 734 - 743 .
Wang Guan , Zhang PeiKou , et.al . Research on constitutive model of aluminum alloy 7075 thermal deformation based on deep neural network [J]. Journal of Mechanical Science and Technology , 2023 , 37 ( 2 ).
张彩东 , 丁培道 , 周守则 , 等 . 热处理和热变形对M2高速钢铸带中碳化物的影响 [J]. 特殊钢 , 2006 ,( 6 ): 18 - 20 .
敖影 , 周灿栋 . P550奥氏体不锈钢的热变形行为研究 [J]. 上海金属 , 2016 , 38 ( 5 ): 22 - 26 .
刘志凌 , 任帅 , 刘伟 , 等 . GH141镍基高温合金的热变形行为和组织演变 [J]. 中国有色金属学报 , 2023 , 33 ( 8 ): 2577 - 2592 .
林田子 , 杨颖 , 翟晓亮 , 等 . Nb含量和热变形参数对纵向变截面耐候桥梁钢变形抗力及组织的影响 [J]. 特殊钢 , 2023 , 44 ( 4 ): 108 - 113 .
胡伟华 , 康永林 , 唐兴昌 . 321奥氏体不锈钢动态再结晶的研究 [J]. 特殊钢 , 2012 , 33 ( 6 ): 59 - 62 .
0
浏览量
0
下载量
0
CSCD
0
CNKI被引量
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621