1.南京钢铁股份有限公司特钢事业部,南京 210035
2.北京科技大学绿色低碳钢铁冶金全国重点实验室,北京 100083
黄宇(1992—),男,博士,工程师; E-mail : huang_yu29@163.com
收稿:2025-01-16,
纸质出版:2025-05-30
移动端阅览
黄宇,韩玉梅,成国光等.稀土Ce对430铁素体不锈钢等轴晶率的影响机理[J].特殊钢,2025,46(03):52-57.
Huang Yu,Han Yumei,Cheng Guoguang,et al.Influence Mechanism of Elemental Ce on the Equiaxed Crystal Ratio of 430 Ferrite Stainless Steel[J].Special Steel,2025,46(03):52-57.
黄宇,韩玉梅,成国光等.稀土Ce对430铁素体不锈钢等轴晶率的影响机理[J].特殊钢,2025,46(03):52-57. DOI: 10.20057/j.1003-8620.2025-00012.
Huang Yu,Han Yumei,Cheng Guoguang,et al.Influence Mechanism of Elemental Ce on the Equiaxed Crystal Ratio of 430 Ferrite Stainless Steel[J].Special Steel,2025,46(03):52-57. DOI: 10.20057/j.1003-8620.2025-00012.
以430铁素体不锈钢的深加工性能为背景,研究了稀土Ce对430铁素体不锈钢等轴晶率的影响机理。通过研究稀土夹杂物的位置、数量密度、尺寸与等轴晶率之间的关系,得出了稀土Ce对于430铁素体不锈钢等轴晶率的影响机理。结果表明:随着Ce含量从0%增加到0.039%,含Ce夹杂物的数量密度0个/mm
2
增加到194.37个/mm
2
,各试样中含Ce夹杂物的尺寸85%以上在1~2 μm之间,等轴晶率从28.3%增加到84.4%,相应的等轴晶尺寸从1 910 μm降低到310 μm。结合热力学计算结果,随着Ce含量的增加,SiO
2
夹杂物逐渐被改质为Ce-O,含Ce夹杂物对于铁素体的异质形核作用是导致430铁素体不锈钢等轴晶率提高的主要原因。PROCAST的CAFE计算模型也表明,随着形核剂粒子数量密度的增加,等轴晶率逐渐增加,理论计算结果和实际观察结果基本相吻合。
Taking the deep processing properties of 430 ferritic stainless steel as the background, the influence mechanism of rare earth Ce on the equiaxed crystal ratio of 430 ferritic stainless steel was studied. By studying the relationship between the number density, size of rare earth inclusions and equiaxed crystal ratio, the mechanism of the increase of the equiaxed crystal ratio by the rare earth Ce is obtained. The results show that with the increase of Ce content from 0% to 0.039%, the number density of Ce-containing inclusions increases from 0 per/mm
2
to 194.37 per/mm
2
, the equiaxed crystal ratio increased from 28.3% to 84.4%, and the corresponding equiaxed grain size decreased from 1 910 μm to 310 μm. Based on thermodynamic calculations, with the in
crease of Ce content, SiO
2
inclusions are gradually modified to Ce-O, and the heterogeneous nucleation of Ce inclusions on ferrite is the main reason for the increase in equiaxed grain rate of 430 ferritic stainless steel. The CAFE calculation model of PROCAST also indicates that as the number density of nucleating agent particles increases, the equiaxed grain rate gradually increases, and the theoretical calculation results are basically consistent with the actual observation results.
李实 , 段豪剑 , 张立峰 . 含Ti铁素体不锈钢连铸坯表层TiN夹杂物的分布 [J]. 钢铁 , 2025 , 60 ( 1 ): 100 - 108 .
陈永峰 , 施晓芳 , 常立忠 . 含钛核心提高铁素体不锈钢等轴晶率的研究 [J]. 钢铁钒钛 , 2018 , 39 ( 4 ): 129 - 136 .
Porter D L . Ferrite formation in neutron-irradiated type 304L stainless steel [J]. Journal of Nuclear Materials , 1979 , 79 ( 2 ): 406 - 411 .
Wang X H , Wu Y M , Sun L , et al . Microstructure evolution and mechanical properties of ferrite-austenite stainless steel bimetals fabricated via wire arc additive manufacturing [J]. Steel Research International , 2024 , 95 ( 3 ): 2300494 .
Piccardo P , Gannon P , Chevalier S , et al . ASR evaluation of different kinds of coatings on a ferritic stainless steel as SOFC interconnects [J]. Surface and Coatings Technology , 2007 , 202 ( 4-7 ): 1221 - 1225 .
常锷 , 王立江 . 铁素体不锈钢凝固组织的影响因素 [J]. 钢铁 , 2012 , 47 ( 8 ): 27 - 30 .
Sahoo P P , Kumar A , Halder J , et al . Optimisation of electromagnetic stirring in steel billet caster by using image processing technique for improvement in billet quality [J]. ISIJ International , 2009 , 49 ( 4 ): 521 - 528 .
Madhusudhan Reddy G , Mohandas T , Sambasiva Rao A , et al . Influence of welding processes on microstructure and mechanical properties of dissimilar austenitic-ferritic stainless steel welds [J]. Materials and Manufacturing Processes , 2005 , 20 ( 2 ): 147 - 173 .
Hou Y , Cheng G , Kadoi K , et al . Acceleration mechanism of Ti 2 O 3 on TiN formation and δ-ferrite nucleation of ferritic stainless steel [J]. Journal of Alloys and Compounds , 2022 , 912 .
李亚波 , 王福明 , 朱宝晶 . 稀土元素在铁索体不锈钢中的作用和应用前景 [J]. 特殊钢 , 2008 , 29 ( 3 ): 39 - 41 .
Hou Y Y , Cheng G G . Effect of Nb on the As-cast structure and compactness degree of ferritic stainless steel dual stabilized by Ti and Nb [J]. ISIJ International , 2018 , 58 ( 12 ): 2298 - 2307 .
王 利 , 刘成宝 , 李浩秋 , 等 . 稀土对20CrMnTi齿轮钢夹杂物和疲劳性能的影响 [J]. 特殊钢 , 2024 , 45 ( 6 ): 117 - 124 .
Liu X , Liang J L . Effect of Rare Earth Metals on Microstructure and Impact Property of Duplex Stainless Steel [J]. Advanced Materials Research , 2013 , 662 : 424 - 427 .
赵振铎 , 陈金虎 , 范光伟 . 稀土型铁素体不锈钢430组织及韧性研究 [J]. 中国稀土学报 , 2012 , 30 ( 1 ): 97 - 101 .
Zhang S H , Yu Y C , Wang S B , et al . Effects of cerium addition on solidification structure and mechanical properties of 434 ferritic stainless steel [J]. Journal of Rare Earths , 2017 , 35 ( 5 ): 518 - 524 .
谢胜涛 , 邵书东 , 亓海燕 , 等 . 稀土元素对430铁素体不锈钢组织和性能的影响 [J]. 中国冶金 , 20 , 32 ( 6 ): 94 - 100 .
饶新军 , 刘晓 , 刘浏 . 稀土在铁素体不锈钢中的研究现状及发展前景 [J]. 钢铁研究学报 , 20 , 35 ( 1 ): 11 - 23 .
庞瑞朋 , 王福明 , 王金龙 , 等 . 3D-CAFE法凝固参数对430不锈钢凝固组织的影响 [J]. 材料热处理学报 , 2013 , 34 ( 12 ): 188 - 195 .
Wolfe G M , Thornton J A . The chemistry of atmosphere-forest exchange (CAFE) model-part 1: Model description and characterization [J]. Atmospheric Chemistry and Physics , 2011 , 11 ( 1 ): 77 - 101 .
Jiang Z H , Wang C , Gong W , et al . Evolution of inclusions and change of as-cast microstructure with Mg addition in high carbon and high chromium die steel [J]. Ironmaking & Steelmaking , 2015 , 42 ( 9 ): 669 - 674 .
邓小旋 , 王新华 , 姜敏 , 等 . 稀土处理钢中夹杂物对晶内针状铁素体形成的影响 [J]. 北京科技大学学报 , 2012 , 34 ( 5 ): 535 - 540 .
王龙妹 , 朱桂兰 , 徐 军 , 等 . 稀土在430铁素体不锈钢中的作用及机理研究 [J]. 稀土 , 2008 , 29 ( 1 ): 67 - 71 .
宋明明 . 稀土对C-Mn钢中针状铁素体形成的影响 [D]. 北京 : 北京科技大学 , 2016 .
0
浏览量
2
下载量
0
CSCD
0
CNKI被引量
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621