锡钢电力负荷节能软件装置-DSM的应用

特殊钢 ›› 2005, Vol. 26 ›› Issue (1): 46-48.

锡钢电力负荷节能软件装置-DSM的应用

沈仁, 严大铭, 项慕亮, 马丁

无锡东方环境工程设计研究所，无锡214062
江苏锡钢集团公司，无锡214026
德国法兰克盖姆普能源控制(无锡)公司，无锡214028)

收稿日期:2004-08-26 出版日期:2005-02-01 发布日期:2023-05-24
作者简介:沈仁，男，63岁，教授级高工，1963年上海同济大学毕业。从事冶金环境工程研究设计。

Application of Energy Saving Software-DSM for Electric Load at Xigang Steel

Sheng Ren,Yan Daming and Xiang Muliang,Martin

Dongfang Environment Engineering Designuing Research Institute, Wuxi 214062
Jiangsu Xigang Group Co Lid,Wuxi 214026
(German Franke Energy Control (Wuxi)Co Ltd, Wuxi 214028

Received:2004-08-26 Published:2005-02-01 Online:2023-05-24

摘要/Abstract

摘要： 钢厂等主要用电单位的峰值负荷造成电力资源浪费、供电紧张及企业自身高成本用电。锡钢集团电力负荷需求侧控制 (DSM)项目 ,应用“趋势分析”原理 ,通过调控主要用电设备电弧炉的手段 ,使用电负荷均衡运行 ,从而使电力负荷 (需量 )下降 5 0 2 2kW (10 % )左右 ,对用电大户负荷控制 (DSM) ,节约用电费用 ,缓解城市供电压力 ,提供了有益的途径。

关键词: 钢厂, 负荷需求侧控制, 趋势分析

Abstract: The peak value load of main electric power consumer such as steel works causes to waste electric power re- source, in short supply of mains power and to increase electric cost for consumer. The project of electric load demand side management (DSM)for Xigang Steel make the electric load(demand)to decrease by about 10%-5022 kW by using “tend analysis” principle and by means of adjusting and controlling the main equipment - electric arc furnace. It is a available way for electric load control (DSM)of main electric power consumer, economizing electric expense and alleviating the pressure of supplying power in city.

Key words: , Steel Works,Electric Load Demand Side Management,Trend Analysis

沈仁, 严大铭, 项慕亮, 马丁. 锡钢电力负荷节能软件装置-DSM的应用[J]. 特殊钢, 2005, 26(1): 46-48.

Sheng Ren, Yan Daming and Xiang Muliang , Martin. Application of Energy Saving Software-DSM for Electric Load at Xigang Steel[J]. Special Steel, 2005, 26(1): 46-48.