X形浸入式水口对结晶器内钢水流动影响的数值模拟

特殊钢 ›› 2005, Vol. 26 ›› Issue (3): 6-8.

X形浸入式水口对结晶器内钢水流动影响的数值模拟

崔小朝，刘梓才，田新明，林金保

太原科技大学工程力学系，太原030024

收稿日期:2004-11-30 出版日期:2005-06-01 发布日期:2023-05-10
作者简介:崔小朝(1962-),男,博士,教授,副院长,从事机械、冶金、复合材料研究。

Numeric Simulation of Effect of X-Shape Submerged Nozzle on Flow of Molten Steel in Mold

Cui Xiaochao, Liu Zicai, Tian Xinming， Lin Jinbao

Engineering Mechanics Department, Taiyuan University of Science and Technology, Taiyuan 030024

Received:2004-11-30 Published:2005-06-01 Online:2023-05-10

摘要/Abstract

摘要： 应用粘性流体力学的基本原理，釆用专业流体力学软件FLUENT对160mmx160mm方坯连铸X 形浸入式水口对结晶器内钢水流动的影响进行数值模拟，验证了 X形浸入式水口浇注时，通过两块半椭圆形导流板上、下平面与倒锥形圆筒内腔围成的螺旋形导流通道的导向作用，使钢水以涡流形式进入到结晶器，能有效减轻钢水的冲击深度,有利于夹杂物、气泡聚集升浮和提高连铸效率。

Abstract: The numeric simulation of effect of X-shape submerged nozzle on flow of molten steel in a mold for 160 mm x 160 mm concasting billet has been carried out by viscous fluid mechanics theory and CFD software Fluent. It was verified that during pouring with X-shape submerged nozzle, the vortex molten steel entering into mold by guide of vortex guidance channel which was formed with top and bottom surface of two semi-oval flow guidance plate and invert taper pipe to availably reduce impact depth, promote inclusion and gas bubble aggregating and floating off, and improve concasting efficiency.

崔小朝, 刘梓才, 田新明, 林金保. X形浸入式水口对结晶器内钢水流动影响的数值模拟[J]. 特殊钢, 2005, 26(3): 6-8.

Cui Xiaochao, Liu Zicai, Tian Xinming, Lin Jinbao. Numeric Simulation of Effect of X-Shape Submerged Nozzle on Flow of Molten Steel in Mold[J]. Special Steel, 2005, 26(3): 6-8.