超塑性奥氏体-铁素体双相不锈钢00Cr25Ni7Mo3N的研制

特殊钢 ›› 2005, Vol. 26 ›› Issue (6): 44-46.

超塑性奥氏体-铁素体双相不锈钢00Cr25Ni7Mo3N的研制

张兰,王立新,任学平

太原钢铁(集团)公司，太原030003;
北京科技大学材料科学与工程学院，北京100083

收稿日期:2005-07-07 出版日期:2005-11-08 发布日期:2023-04-12
作者简介:张兰(1963-),女，硕士，高级工程师，北京科技大学毕业，从事冶金和材料研究。

Development of Superplastic Duplex Austenitic-Ferritic Stainless Steel 00Cr25Ni7Mo3N

Zhang Lan , Wang Lixin,Ren Xueping

Taiyuan Iron and Steel(Group)Co Ltd,Taiyuan 030003；
Material Science and Technology School,University of Science and Technology,Beijing 100083

Received:2005-07-07 Published:2005-11-08 Online:2023-04-12

摘要/Abstract

摘要： 通过电弧炉-电渣重熔工艺开发研制了成分为(%):0.021C,24.16Cr,7.21Ni,2.87Mo,0.17N,0.48Cu超塑性双相不锈钢00Cr25Ni7Mo3N。试验结果表明,00Cr25Ni7Mo3N超塑性双相不锈钢的耐孔蚀性和耐缝隙腐蚀性远高于传统的304L和316L奥氏体不锈钢。在变形温度960℃、应变速率2×10^-3/s时,00Cr25Ni7Mo3N超塑性双相不锈钢的最高延伸率为960%,该钢超塑性变形的均匀性优于TC4钛合金,可显著减轻构件的重量。

关键词: 超塑性, 双相不锈钢, 耐蚀性

Abstract: The superplastic duplex austenitic-ferritic stainless steel-0.021C,24. 16Cr,7.21Ni,2.87Mo,0. 17N, 0.48Cu has been developed by arc furnace + electroslag remelting process. The test results showed that the pitting erosion resistance and the crevice corosion resistance of superplastic duplex stainless steel 00Cr25Ni7Mo3N were much more higher than that of traditional austenite stainless steel 304L and 316L. The maximum elongation of superplastic duplex stainless steel 00Cr25Ni7Mo3N at 960℃ with strain rate 2×10-³/s was 960%,and the uniformity during superplastic deformation of the duplex steel was higher than that of titanium alloy TC4 to obviously decrease the weight of component.

Key words: Superplasticity,Duplex Stainless Steel,Corrosion Resistance

张兰, 王立新, 任学平. 超塑性奥氏体-铁素体双相不锈钢00Cr25Ni7Mo3N的研制[J]. 特殊钢, 2005, 26(6): 44-46.

Zhang Lan , Wang Lixin, Ren Xueping. Development of Superplastic Duplex Austenitic-Ferritic Stainless Steel 00Cr25Ni7Mo3N[J]. Special Steel, 2005, 26(6): 44-46.