冷轧中间辊用半高速钢16Cr5D 的组织和性能

特殊钢 ›› 2006, Vol. 27 ›› Issue (1): 28-29.

冷轧中间辊用半高速钢16Cr5D 的组织和性能

李朝华, 王志新, 刘英武

东北特钢集团北满特殊钢有限责任公司，齐齐哈尔161041

收稿日期:2005-08-29 出版日期:2006-02-01 发布日期:2006-02-01
作者简介:李朝华(1971-),女，工程师，从事工模具钢研究

Structure and Properties of Middle Roll of Semi-High Speed Steel 16Cr5D for Cold Rolling

Li Zhaohua,Wang Zhixin, Liu Yingwu

Beiman Special Steel Co Lid,Dongbei Special Steel Group,Qiqihaer 161041

Received:2005-08-29 Published:2006-02-01 Online:2006-02-01

摘要/Abstract

摘要： 试验研究了20kg中频感应炉冶炼的半高速钢16Cr5D(%:0.50～0.56C,0.36~0.39Mn,0.95~ 1.03Si,5.34～5.68Cr,0.31~0.41Ni,1.00～1.04Mo,0.29～0.30V)的铸态组织以及880～1060℃淬火、200～750 ℃回火后的锻态组织和机械性能。试验结果表明，该钢最佳淬火温度为970～1000℃,在500 ℃回火有明显的二次硬化，淬回火后具有良好的综合机械性能，是优良的冷轧中间辊材质

关键词: 冷轧中间辊,半高速钢16Cr5D, , 组织, 机械性能

Abstract: The as cast structure and forged structure and mechanical properties of semi-high speed steel 16Cr5D- 0.50~0.56C,0.36～0.39Mn,0.95～1.03Si,5.34～5.68Cr,0.31～0.41Ni,1.00～1.04Mo,0.29～0.30V quenched at 880～1060 ℃ and tempered at 200~750 ℃ melted by a 20 kg medium frequency induction furnace has been tested and studied. The test results showed that the optimum quenching temperature was 970~1000 ℃,the second hardening of the steel was obvious as tempered at 500 ℃,and the quenched and tempered steel had excellent comprehensive mechanical properties. Therefore the steel is a nice material for cold middle roll

李朝华, 王志新, 刘英武. 冷轧中间辊用半高速钢16Cr5D 的组织和性能[J]. 特殊钢, 2006, 27(1): 28-29.

Li Zhaohua, Wang Zhixin, Liu Yingwu. Structure and Properties of Middle Roll of Semi-High Speed Steel 16Cr5D for Cold Rolling[J]. Special Steel, 2006, 27(1): 28-29.