固溶温度对超级双相不锈钢00Cr25Ni7Mo4N 组织和性能的影响

特殊钢 ›› 2006, Vol. 27 ›› Issue (4): 11-13.

固溶温度对超级双相不锈钢00Cr25Ni7Mo4N 组织和性能的影响

吴忠忠^1.2，宋志刚²，郑文杰²，陈斌²，陆建生¹

1昆明理工大学材料与冶金工程学院，昆明650093;2钢铁研究总院结构材料研究所，北京100081

收稿日期:2006-01-26 出版日期:2006-08-01 发布日期:2023-03-17
作者简介:吴忠忠(1978-),男，材料学专业，硕士研究生，从事不锈钢研究。

Influence of Solution Temperature on Structure and Properties of Super Duplex Stainless Steel 00Cr25Ni7Mo4N

Wu Zhongzhong^1.2, Song Zhigang², Zheng, Wenjie², Chen Bin², Lu Jiansheng¹

1 Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming 650093;
2 Center Iron and Steel Institute, Beijing 100081

Received:2006-01-26 Published:2006-08-01 Online:2023-03-17

摘要/Abstract

摘要： 试验和测试了900-1 300℃固溶处理时双相不锈钢00Cr25Ni7Mo4N的相组成、冲击能AKV和硬度(HRC)值。试验结果表明,在900-1 020℃固溶处理时,双相不锈钢中有16．97％-3．22％σ相析出,使钢的冲击能A_kv值从1 040-1 250℃处理的224～280 J降至3～44 J。该双相不锈钢的热加工温度应大于1 040℃,其最佳固溶处理温度为1 040～1 100℃。

Abstract: The phase composition, impact energy A_kvand hardness HRC value of duplex stainless steel 00Cr25Ni7Mo4N solution treated at 900~1300 ℃ have been studied and examined. The results showed that 16.97%~ 3.22% a- phase precipitated in duplex stainless steel during solution treatment at 900~1020 ℃ led to the impact energy Agy value of steel decreasing to 3~44 J from 224~280 Jwhile steel treated at 1040~1250 ℃. The hot work temperature of the duplex stainless steel should be higher than 1040 ℃ and its optimum solution treatment temperature is 1040～1100 ℃.

吴忠忠, 宋志刚, 郑文杰, 陈斌, 陆建生. 固溶温度对超级双相不锈钢00Cr25Ni7Mo4N 组织和性能的影响[J]. 特殊钢, 2006, 27(4): 11-13.

Wu Zhongzhong, Song Zhigang, Zheng Wenjie, Chen Bin, Lu Jiansheng. Influence of Solution Temperature on Structure and Properties of Super Duplex Stainless Steel 00Cr25Ni7Mo4N[J]. Special Steel, 2006, 27(4): 11-13.