TRIP钢 TMP和热处理过程中的组织演变

特殊钢 ›› 2007, Vol. 28 ›› Issue (2): 36-38.

TRIP钢 TMP和热处理过程中的组织演变

唐代明

攀枝花学院四川省钒钛材料工程技术研究中心，攀枝花617000

收稿日期:2006-09-18 出版日期:2007-04-01 发布日期:2023-03-10
作者简介:唐代明(1962-),男，副教授，1983年昆明工学院金属学热处理专业毕业，从事微合金非调质钢、焊接材料用钢开发研究。

Advance in Research on Evolution of Structure in TRIP Steels during TMP and Heat Treatment

Tang Daiming

Sichuan Technology & Engineering Research Center for Vanadium and Titanium Materials,Panzhihua University,Panzhihua 617000

Received:2006-09-18 Published:2007-04-01 Online:2023-03-10

摘要/Abstract

摘要： 介绍了热轧TRIP钢TMP(形变热处理)的精轧阶段(奥氏体未再结晶区变形)、输送台冷却(γ-α两相区的相变)和卷取阶段(贝氏体转变)热轧TRIP钢组织演变的影响因素;冷轧TRIP钢临界区(γ-α区)退火和贝氏体转变区等温处理时的组织演变及其演变过程中TRIP钢残余奥氏体中碳的富集的研究进展。

关键词: TRIP钢, TMP, , 热处理, 组织演变

Abstract: Influence factors on evolution of structure in hot rolled TRIP steels during TMP(Thermnomechanical processing)finishing rolling(austenite deformed in non-crystallization region),ROT(run out table)cooling(phase transformation in y-a two phase region)and coiling process (bainite transformation);evolution of structure of cold rolled TRIP steel during intercrilical annealing(γ-a region)and bainite isothermal region transformation, and carbon enrichment in retained austenite of TRIP steel during structural evolution are presented.

唐代明. TRIP钢 TMP和热处理过程中的组织演变[J]. 特殊钢, 2007, 28(2): 36-38.

Tang Daiming. Advance in Research on Evolution of Structure in TRIP Steels during TMP and Heat Treatment[J]. Special Steel, 2007, 28(2): 36-38.

参考文献

1 Takehide Senuma.Physical Metallurgy of Modern High Strength Steel Sheets. ISIJ Interational,2001,41(6):520
2 马鸣图，吴宝榕.双相钢—物理和力学冶金.北京：冶金工业出版社，1988
3 景财年，王作成.TRIP-相变诱发塑性：钢的研究进展.特殊钢 2004,25(4):1
4 Wolfgang Bleck,Andreas Frehn,Joachim Ohlert.铌在双相钢和TRIP 钢中的应用.侯豁然译.铌 · 科学与技术.北京：冶金工业出版社，2003
5 Hanzaki A Zarei,Hodgson P D,Yue S.Hot Deformation Characteristics of Si-Mn TRIP Steels with and without Nb Micralloy Additions. ISUJ International,1995,35(3):324
6 Hanzaki A Zarei,Hodgson P D,Yue S.The Influence of Bainite on Retained Austenite Characteristics in Si-Mn TRIP Steels. ISIJ International,1995,35(1):79
7 Ji Zhuang,Wu Di.Effect of Hot Deformation and Subsequent Austempering on the Mechanical Properties of Si-Mn TRIP Steels. ISIJ International,2006,46(1):121
8 Shunichi Hashimoto,Shushi lkeda, Koh-ichi Sugimoto,et al. Effects of Nb and Mo Addition to 0.2%C- 1.5%Si- 1.5% Mn Steel on Mechani- cal Properties of Hot Rolled TRIP-aided Steel Sheets. ISIJ International,2004,44(9):1590
9 Ichiro Tsukatani,Shun'ichi Hashimoto, Tsuyoshi Inoue. Effects of Silicon and Manganese Addition on Mechanical Properties of High- strength Hot-rolled Sheet Steel Containing Retained Austenite. ISIJ International,1991,31(9):992
11 Samajdar I,Girault E,Verlinden B,et al. Transformations during In- tereritical Annealing of a TRIP-assisted Steel. ISIJ Interational, 1998,38(9):998
12 Chang Cil Lee,Sung-Joon Kim,Chang-Seok Oh,et al. Efects of Heat Treatment and Si Addition on the Mechanical Properties of 0. 1wt% C TRIP-aided Cold-rolled Steels. ISIJ International,2002,42(10):
1162
13 Meyer M De,Vanderschueren D,De Cooman B C.The Infuence of the Substiution of Si by Al on the Properties of Cold Rolled C-Mn-Si TRIP Steels. ISIJ Intemational,1999,39(8):813
14 Jacques PJ,Girault E,Harlet Ph,et al. The Developments of Cold- rolled TRIP-assisted Multiphase Steel Low Silicon TRIP-assigted Multiphase Steels. ISIJ Intemational,2001,41(9):1061
15 Jacques PJ,Cirault E, Mertens A,et al. The Developments of Cold- rolled TRIP-assisted Multiphase Steel Al alloyed TRIP-assisted Multiphase Steels. ISIJ International,2001,41(9):1068
16 Jiao S, Hassani F,Donaberger R L,et al. The Effect of Processing History on a Cold Rolled and Annealed Mo-Nb Microalloyed TRIP Steel. ISIJ Intemational,2002,42(3):299

[1]	彭峰, 李旭, 李博鹏, 张越, 王占忠, 郭士北. 紧固件用10.9级32CrB4调质圆钢的开发[J]. 特殊钢, 2024, 45(6): 8-11.
[2]	赵广迪, 臧喜民, 刘志超, 井玉安. 淬火工艺对A514CrQ齿条钢显微组织演变及硬度的影响[J]. 特殊钢, 2024, 45(6): 73-82.
[3]	徐临超, 叶赛男, 王文权, 张新戈, 陆有, 郭威. 热处理工艺对锻造430F铁素体不锈钢组织和性能的影响[J]. 特殊钢, 2024, 45(6): 83-87.
[4]	李阳, 赵广迪, 臧喜民, 姜昊源, 王兆宇. B对Fe-Cr-B-C合金热处理后显微组织和强韧性的影响[J]. 特殊钢, 2024, 45(5): 25-33.
[5]	袁志钟, 陈露, 张伯承, 刘海明, 牛宗冉, 王致远, 鞠玉琳, 程晓农. LB/M复相热处理工艺对冷作模具钢DC53组织和力学性能的影响[J]. 特殊钢, 2024, 45(4): 153-160.
[6]	张宏, 李旭, 陈华, 唐琴, 李林森, 王立, 高首磊. 热处理工艺对140 ksi等级In718合金组织与性能的影响[J]. 特殊钢, 2024, 45(4): 139-145.
[7]	高培军, 杨密, 张涵, 王文先. 热处理温度对0Cr21Al6热轧板材组织结构及性能的影响[J]. 特殊钢, 2024, 45(3): 75-79.
[8]	徐浩, 刘建华, 刘洪波, 刘颖, 李民, 何杨. 高锰奥氏体低温钢发展现状、成分设计及热处理焊接工艺分析[J]. 特殊钢, 2024, 45(2): 8-17.
[9]	阎超楠, 徐凯, 张文涛, 陈殿清, 袁相坤, 李麦麦. 利用在线热处理技术研发YL82B-QM高强钢绞线[J]. 特殊钢, 2023, 44(5): 43-46.
[10]	赵成志, 张玉春, 李建新, 庞学东, 孙勇, 翟羽佳, 梁晓东. 冷拔变形量对30CrMnSiNi2A六角材晶粒度及脱碳判定的影响[J]. 特殊钢, 2023, 44(3): 109-113.
[11]	郭洛方, 徐凯, 高永彬, 孙强, 牛斌. 盐浴等温热处理对超高强硬线钢100Si组织和性能的影响[J]. 特殊钢, 2023, 44(3): 84-89.
[12]	齐明, 梁晓东, 韩大虹, 任建民, 张智超, 王旭. 冷却速率对新型C61齿轮钢力学性能和微观组织的影响[J]. 特殊钢, 2023, 44(2): 80-83.
[13]	王兆英, 吴畏, 赵振, 罗文韬, 宋金辉, 喻峰. 紧固件用SA-540合金钢的强韧化工艺研究[J]. 特殊钢, 2022, 43(6): 89-94.
[14]	胡梦頔. 70 t EAF-LF-RH冶炼18CrNiMo7-6齿轮钢过程的夹杂物变化[J]. 特殊钢, 2022, 43(4): 21-23.
[15]	毕胜, 宫哲, 王鑫, 何金泽, 陈修君. 优化连铸工艺改善SWRH82A钢150 mm x 150 mm 铸坯中心碳偏析实践[J]. 特殊钢, 2022, 43(4): 24-27.