α-相对2.625 t1Cr18Ni9Ti 不锈钢锭初轧坯表面质量的影响

特殊钢 ›› 2007, Vol. 28 ›› Issue (2): 39-40.

α-相对2.625 t1Cr18Ni9Ti 不锈钢锭初轧坯表面质量的影响

钱刚^1,2, 阮小江¹

1北京科技大学，北京100083;
2大冶特殊钢股份有限公司，黄石435001

收稿日期:2006-11-10 出版日期:2007-04-01 发布日期:2023-03-10
作者简介:钱刚(1966-),男，高级工程师，《特殊钢》编委会副主任委员，上海大学毕业，从事特殊钢冶金和工艺研究。

Effect of α-Phase on Bloom Surface Quality of 1Cr18Ni9Ti Stainless Steel 2.625t Ingot

Qian Gang^1,2, Ruan Xiaojiang¹

1 University of Science and Technology, Beijing 100083;
2 Daye Special Steel Corp Ltd, Huangshi 435001

Received:2006-11-10 Published:2007-04-01 Online:2023-03-10

摘要/Abstract

摘要： 生产实践表明,1Cr18Ni9Ti奥氏体不锈钢α-相数量(级别)是影响2．625 t钢锭初轧坯表面质量的主要因素,当钢中α-相超过2．5级[α-相含量(面积)=12％]时,钢坯表面质量急剧下降。当钢中C为0．08％(Cr+ 3．28Ti) ／Ni≤2,钢锭均热温度≤1 270℃时,钢中α-相≤2．5级,可得到良好表面质量的轧坯。为获得较好的轧坯表面质量,应控制钢中Ti≤0．70％、电渣母材的Ti≤0．80％。

Abstract: Production practice indicated that the amount(rating)of α-phase in 1Cr18Ni9Ti austenite stainless steel was principal factor to influence bloom surface quality of 2.625 t ingot, and as α-phase rating was more that 2.5 corresponding to α-phase content(area)= 12%, the surface quality of bloom rapidly decreased. As C% in steel was 0.08% (Cr+3.28Ti)/Ni≤2, and ingot pit temperature ≤1270 ℃, the rating of α-phase in steel was ≤2.5 to get excellent sur- face quality of bloom. For obtained nice surface quality of bloom it should be to control Ti content in steel ≤0.70%, and in ESR electrode Ti≤0.80%.

钱刚, 阮小江. α-相对2.625 t1Cr18Ni9Ti 不锈钢锭初轧坯表面质量的影响[J]. 特殊钢, 2007, 28(2): 39-40.

Qian Gang, Ruan Xiaojiang. Effect of α-Phase on Bloom Surface Quality of 1Cr18Ni9Ti Stainless Steel 2.625t Ingot[J]. Special Steel, 2007, 28(2): 39-40.