ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2008, Vol. 29 ›› Issue (4): 31-32.

• 工艺技术 • 上一篇    下一篇

成分和热轧参数对HP295钢板抗拉强度影响的线性模型及其应用

郑光文   

  1. 安徽工业大学材料成型系,马鞍山243000
  • 收稿日期:2008-01-09 出版日期:2008-08-01 发布日期:2022-12-23
  • 作者简介:郑光文(1962-),男,教授,北京科技大学毕业,材料成型新 工艺、新技术的研究。

Linear Model for Effect of Chemical Composition and Hot Rolling Parameters on Tensile Strength of HP295 Steel Strip and It's Application

Zheng Guangwen   

  1. Material Forming Department,Anhui Industry University,Maanshan 243000
  • Received:2008-01-09 Published:2008-08-01 Online:2022-12-23

摘要: 在热轧HP295气瓶钢板(%:0.13~0.18C、0.80~1.00Mn、≥0.015Nb、≥0.010Ti)抗拉强度统计分析的基础上,采用多元线性回归方法建立了碳当量Cehp=c+0.242 6Mn-0.353Si、板厚h和卷取温度CT与HP295钢板抗拉强度σb之间的线性关系式:σb=499.1Cehp-17.72h-0.728CT+836.68。检验结果表明,HP295钢板抗拉强度的计算值与测量值之间的相对误差≤8.67%,满足计算精度要求。

Abstract: Based on the statistics and analysis on tensile strength of HP295(0.13~0. 18C,0.80~1.00Mn,≥  0.015Nb,≥0.010Ti)hot rolled steel strip for gas bottle by using multiple regression analysis method,the linear equation of tensile strength gu of HP295 steel strip with carbon equivalent.Cop=C+0.2426Mn-0.353Si,strip thickness h and coiling  temperature CT:04=499. 1Cp- 17.72h-0.728CT+836.68.Examination  results  showed  that  relative  eror between calculated and measured value of tensile strength of HP295 steel strip was ≤8.67% to meet the requirement for calculated precision.