ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2010, Vol. 31 ›› Issue (2): 45-47.

• 工艺技术 • 上一篇    下一篇

CaAl2合金对低碳钢水的脱氧试验

谢健1, 吴永来2   

  1. 1江苏信息职业技术学院,无锡214153;
    2宜兴市振球炉料有限公司,宜兴214266
  • 出版日期:2010-04-01 发布日期:2022-11-16
  • 作者简介:谢健(1966-),女,讲师,系主任,1989年东北大学毕业, 现从事教学和钢水精炼研究。

Deoxidation Experiment of Low Carbon Steel Liquid by CaAl2 Alloy

Xie Jian1 , Wu Yonglai2   

  1. 1 College of Jiangsu Information Professional Technology, Wuxi 214153;
    2 Yixing Zhenqiu Furnace Material Co Ltd, Yixing 214266
  • Published:2010-04-01 Online:2022-11-16

摘要: 在热力学计算的基础上,对中频感应炉中100 kg 0.15C-1.36Mn钢水分别进行加1 kg AlFe、1 kgAlFe+喂0.5 kg钙线和1 kg CaAl2的终脱氧试验。结果表明,AlFe、AlFe+Ca、CaAl2终脱氧的脱氧率分别为79.3%、87.2%和85.0%,用CaAl2终脱氧,炉渣中低熔点相12(CaO)·7(Al2O3)和(CaO)·(Al2O3)·2(SiO2)比例明显增多,CaO和Al2O3相减少或消失,因此CaAl2有较强的去除钢中夹杂物的功能。

关键词: 低碳钢, CaAl2合金, 复合脱氧

Abstract: Based on thermodynamics calculation f the end deoxidation of 100 kg 0. 15C-t. 36Mn steel liquid in medium frequency induction furnace is carried out respectively by added 1 kg AlFe, 1 kg AlFe + feeding 0. 5 kg Ca wire, and 1 kg CaAl2. Results show that deoxidation rate of liquid by AlFe, AlFe + Ca and CaAl2 is respectively 79. 3% , 87.2% and 85. 0% ; with end oxidation by CaAl2, the ratio of low melting point phases 12( CaO) . 7(Al2O3) and (CaO) • (Al2O3) • 2( SiO2) in slag obviously increases, and the CaO and Al2O3 phase in liquid are on the decrease or trace, therefore the CaAl2 has strong function to remove inclusions in steel.

Key words: Low Carbon Steel, CaAl2 Alloy, Compound Deoxidation