铁路用钢轨及其制造技术

特殊钢 ›› 2010, Vol. 31 ›› Issue (5): 22-25.

铁路用钢轨及其制造技术

任安超^1,2，吉玉²，周桂峰^1,2，袁泽喜¹

1. 武汉科技大学材料与冶金学院，武汉 430081 ；
2. 武汉钢铁(集团)公司研究院，武汉 430080；

收稿日期:2010-03-04 出版日期:2010-10-01 发布日期:2022-11-11
作者简介:任安超(1976-)，男，博士生，工程师，高性能型钢研究。
基金资助:
武汉市科技计划项目资助(20061002085)

Rails for Railway and Its Manufacturing Technology

Ren Anchao^1,2 , Ji Yu² , Zhou Guifeng^1,2 , Yuan Zexi¹

1. Institute of Materials Science and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081 ；
2. Research and Development Center, Wuhan Iron and Steel (Group) Corp, Wuhan 430080；

Received:2010-03-04 Published:2010-10-01 Online:2022-11-11

摘要/Abstract

摘要： 总结分析了货运铁路和客运铁路用钢轨的典型成分体系与性能,阐述了铁路用钢轨在冶炼、连铸、热轧等制造流程中存在的关键技术问题,以及该技术在国内外的新进展,着重分析了万能轧制技术制造铁路用钢轨的特点及其关键技术。从成分体系开发、制造技术等方面分析了国内铁路用钢轨的生产现状及质量水平。

关键词: 钢轨, 万能轧制, 生产装备, 制造工艺

Abstract: The representative chemical composition system and properties of steel rails for freight transport and passenger traffic are summarized and analyzed. The key technologies of rails for railway manufacturing flow sheet including melting, continuous casting and hot rolling, and the now progress of the technologies at home and abroad are presented to put emphasis on analysis of characteristics and key technologies for manufacturing rails for railway by using universal mill. The present production status and quality level of domestic rails for railway including development of chemical composition system and manufacturing technologies are analyzed.

Key words: Rail, Universal Rolling, Production Equipment, Manufacturing Process

任安超, 吉玉, 周桂峰, 袁泽喜. 铁路用钢轨及其制造技术[J]. 特殊钢, 2010, 31(5): 22-25.

Ren Anchao , Ji Yu , Zhou Guifeng , Yuan Zexi. Rails for Railway and Its Manufacturing Technology[J]. Special Steel, 2010, 31(5): 22-25.

参考文献

[1] 王传雅.钢轨钢的现状和发展趋势.特殊钢,1999,20(6):54
[2] 董志洪，南振卿.国内外钢轨生产现状与发展.轧钢,2006,8(3)： 6
[3] Scott Lovelace. Heavy Haul Railways Address a Booming Market. Railway Gazette International ,2005 (6) ：327
[4] Marai S J, Vanderwaltj V. An Overview of Railroad Wheel Rim Failure Modes under Heavy Axle Loads. The 14th International Wheelset Congress. USA： [ S. n. ] ,2004
[5] 唐狄.世界高速铁路发展及对钢铁材料要求.马钢职工大学学报,2007,7,13(2):22
[6] Omoaki TtMyuki,Taizo,et al. High Micro-cleanliness Wheels Preventing Shattered-rim Fracture. The 14th International Wheelset Congress. USA： [ S. n. ] ,2004
[7] Ichinose H, Takehara J, Uede M. High Strength Rails Produced by Two-stage Flame Heat-ing and Slack-guenching. Second International Heavy Hall Railway Conference. Colorado Springs, Colorado U. S. A.: 1982,9
[8] Sang-Hgun CHO, Ki-Bong Kang, John J Jonas. The Dynamic, Static and Metadynamic Recrystallization of a Nb-microalloyed Steel. ISU International ,2001,41(1) ：63
[9] Kliber J, Schindler I. Recrystallization Precipitation Behavior in Microalloyed Steel. Materials Processing Technology, 1996(60) ：597;
[10] Chiaki Ouchi. Development of Steel Plates by Intensive Use of TMCP and Direct Quenching Process. ISIJ International ,2001,41(6) ：542
[11] 李云武，陈永山，王江.重轨发展趋势及轨梁厂技术改造初探. 攀钢技术,2002,25(3):37
[12] 刘越表，武忠荣.国外高质量重轨生产现状及发展.现代冶金， 2003,4(3) ：70
[13] 陈亚平，王彦中.攀钢高速铁路钢轨生产技术探讨.钢铁,2001, 36(12)：26
[14] 刘彩玲，于广民,吴振国，等.鞍钢1#、2#大方坯连铸机的特点及新钢种的生产开发.重型机械,2002,12(4) ：8
[15] 陈永,朱苗勇.高速轨用钢连铸坯内部质量控制的关键技术. 钢铁,2006,18(12):36
[16] 周清跃，张银花,陈朝阳.客运专线钢轨技术研究.世界轨道交通,2007,10(2)：
[17] 吴伟，刘浏，李峻.重轨钢无铝脱氧工艺的研究.钢铁, 2007,19(3)：33