连铸小方坯生产易切削钢SUM24HSL的技术措施

特殊钢 ›› 2010, Vol. 31 ›› Issue (5): 45-48.

连铸小方坯生产易切削钢SUM24HSL的技术措施

孙华^1,2，高宇¹，孙彦辉¹，李士琦¹

1. 北京科技大学冶金与生态土程学院，北京 100083 ；
2. 南京钢铁联合有限公司，南京 210035；

收稿日期:2010-05-07 出版日期:2010-10-01 发布日期:2022-11-11
作者简介:孙华(1969-)，女，博士研究生，1991年北京科技大学毕业，特种钢冶炼研究。

Technology Measures for Production of Free-Cutting Steel SUM24HSL by Continuous Casting Billet

Sun Hua^1,2 , Gao Yu¹ , Sun Yanhui¹ , Li shiqi¹

1. School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing 100083;
2. Nanjing Iron and Steel Corporation, Nanjing 210035；

Received:2010-05-07 Published:2010-10-01 Online:2022-11-11

摘要/Abstract

摘要： 铅易切削钢生产的关键技术是控制铅的收得率,铅在钢液中的均匀性,铅蒸汽对环境的污染、铸坯表面质量及顺行浇铸。从铅的控制和提高可浇铸性两方面研究了SUM24HSL钢(%:≤0.11C、1.0～1.5Mn、≤0.05Si、0.04～0.09P、0.26～0.42S、0.25～0.32Pb)的100 t EAF-LF-CC工艺。结果表明,在1 620～1 640℃加铅3.5～4.0 kg/t,铅粒度2～3 mm,加入速度50～60 kg/min,氩气流量420～480 L/min,铅的收得率为75%。匹配结晶器振动参数,合适的结晶器保护渣、浇铸温度和保护浇铸技术可保证连铸顺行和轧材冶金质量。

关键词: 铅, 易切削钢SUM24HSL, 小方坯连铸

Abstract: The key technology for production of lead free-cutting steel is to control the yield of lead, the homogeneity of lead in liquid, the lead vapour pollution on environment, the surface quality of billet and smooth casting. Both controlling lead and increasing castability of steel SUM24HSL (% : ≤0.11C, 1.0-1.5Mn, ≤0.05Si, 0.04-0.09P, 0.26-0.42S, 0.25-0.32Pb) produced by 100 t EAF-LF-CC process has been studied. Results show that with adding lead 3.5-4.0 kg/1 (size 2-3 mm) at 1620-1640 °C , adding speed 50-60 kg/min, argon blowing rate 420-480 L/min, the yield of lead is 75%. Smooth casting and qualified metallurgical quality are insured by combined mold vibration parameters, suitable mold flux, casting temperature and shield casting technology.

Key words: Lead, Free-Cutting Steel SUM24HSL, Billet Continuous Casting

孙华, 高宇, 孙彦辉, 李士琦. 连铸小方坯生产易切削钢SUM24HSL的技术措施[J]. 特殊钢, 2010, 31(5): 45-48.

Sun Hua , Gao Yu , Sun Yanhui , Li shiqi. Technology Measures for Production of Free-Cutting Steel SUM24HSL by Continuous Casting Billet[J]. Special Steel, 2010, 31(5): 45-48.

[1]	李朋, 陈修君, 郭立波. DY105高碳钢丝冷拔断裂分析和工艺改进实践[J]. 特殊钢, 2016, 37(6): 35-37.
[2]	董述峰, 赵刚, 叶传龙, 鲍思前, 刘建兵, 李俊弘, 刘小平. 铅浴淬火工艺对70钢丝组织和性能的影响[J]. 特殊钢, 2011, 32(2): 60-62.
[3]	马骏, 胡道峰, 张悦, 文光华, 唐萍, 余杰. 南钢小方坯连铸生产45钢二冷制度的优化[J]. 特殊钢, 2009, 30(1): 38-40.
[4]	陈文满, 文敏, 廖明, 肖时平, 胡兵, 张杰新. 80 t复吹转炉-LF-CC流程生产65Mn弹簧钢的工艺实践[J]. 特殊钢, 2009, 30(1): 52-53.
[5]	何勇, 刘春堂, 周英豪, 周修涛, 白映林. 低碳含铅易切削钢150mm×150mm连铸坯的生产实践[J]. 特殊钢, 2006, 27(3): 53-54.