ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2011, Vol. 32 ›› Issue (4): 26-30.

• 工艺技术 • 上一篇    下一篇

X80管线钢LF-RH二次精炼过程夹杂物行为及控制

李 强 ,王新华,黄福祥,王建,王万军   

  1. 北京科技大学冶金与生态工程学院,北京100083
  • 收稿日期:2011-01-23 出版日期:2011-08-01 发布日期:2022-11-01
  • 作者简介:李强( 1978-),男,博士研究生,讲师,2001年安徽工业大学毕业,洁净钢冶炼和夹杂物控制研究。
  • 基金资助:
    国家重点基础研究发展计划项目资助 (No. 2010CB630806)

Behavior and Control of Nonmetallic Inclusions in X80 Pipeline Steel during LF-RH Secondary Refining Process

Li Qiang, Wang Xinhua, Huang Fuxiang, Wang Jian , Wang Wanjun   

  1. School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing 100083
  • Received:2011-01-23 Published:2011-08-01 Online:2022-11-01

摘要: 研究了210 t BOF-LF-RH-CC工艺流程生产X80管线钢(%:0.041~0.044C、0.15Si、1.78~1.80Mn、0.007~0.010P、0.000 8~0.001 2S、0.039~0.047[Al]s)时精炼过程中夹杂物的变化。在BOF出钢阶段采用加Al强脱氧(0.01%~0.02%[Al]s),LF精炼过程采用高碱度、强还原性精炼渣(精炼渣成分%:50~58CaO、7~10MgO、20~25Al2O3、4~7SiO2、0.5~1.4TFe),炉渣和钢液反应活跃,使得钢中Al2O3夹杂物很快向液态钙铝酸盐和部分液态CaO-MgO-Al2O3复合夹杂物转变。液态夹杂物通过碰撞、聚合、长大及上浮去除,提高了钢液的洁净度。浇铸前T[O]降到(7~10)×10-6,钢中夹杂物尺寸在3~5μm,试验炉次的热轧板内未发现大尺寸的低熔点钙铝酸盐类长条夹杂物。

Abstract: The change of nonmetallic inclusions in X80 pipeline steel (%: 0. 041 〜0. 044C, 0. 15Si, 1. 78 -1. 80Mn, 0. 007 ~ 0. 010P, 0. 000 8 ~ 0. 001 2S, 0. 039 ~ 0. 047 F Al] s) produced by 210 t BOF-LF-RH-slab CC flow sheet during refining process has been studied. With adding Al during BOF tapping for intensifying deoxidation (0. 01 % 〜 0. 02% [ Al] s) and using high basicity and reducibility refining slag (ingredient /%: 50 〜58CaO, 7 ~ l0MgO, 20 ~ 25Al2O3, 4 - 7SiO2, 0. 5 - 1.4TFe) in LF refining process to activate the slag-metal reaction, the Al2O3 inclusions in steel are quickly transformed to liquid calcium aluminates and part-liquid CaO-MgO-Al2O3 complex compound inclusions. The cleanliness of steel liquid is improved by liquid and part-liquid inclusions colliding with one other, agglomerating, coarsening and floating removing. Before casting the T [O] decreases to (7 〜10) x 10 -6, the size range of inclusions in steel is 3 ~ 5 μm and the large-scale low melting point calcium aluminate stringer inclusion doesn,t be found in hot rolled plate of test heats.