SKS51合金工具钢的快速球化退火工艺的试验研究

特殊钢 ›› 2012, Vol. 33 ›› Issue (1): 54-56.

SKS51合金工具钢的快速球化退火工艺的试验研究

薛刚¹，余驰斌¹，鲍思前¹，熊文娟¹，张亚琦¹，张会龙¹，毛新平²，陈麒琳²

1武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室，武汉430081;
2广州珠江钢铁有限责任公司，广州510730

收稿日期:2011-07-08 出版日期:2012-02-01 发布日期:2022-09-20
作者简介:薛刚(1986-),男，硕士研究生，2009年武汉科技大学毕业，中高碳钢组织与性能研究。
基金资助:
广东省重大科技项目资助(2010A080407003)

Test and Study on Fast Spheroidizing Annealing Process for an Alloy Tool Steel SKS51

Xue Gang¹ , Yu Chibin¹, Bao Siqian¹, Xiong Wenjuan¹, Zhang Yaqi¹ , Zhang Huilong¹ , Mao Xinping²，Chen Qilin²

1 Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081 ；
2 Guangzhou Zhujiang Iron and Steel Co Ltd, Guangzhou 510730

Received:2011-07-08 Published:2012-02-01 Online:2022-09-20

摘要/Abstract

摘要： 基于离异共析原理,在实验室条件下试验研究了CSP流程生产的SKS51合金工具钢(/%:0.75～0.85C、O.20～O.50Cr、1.30-2.00Ni)4 mm板快速球化退火生产工艺。结果表明,此钢种经奥氏体化温度730℃、保温10 min随炉冷却到650℃等温球化120 min后,剩余未溶碳化物颗粒最多且分布均匀弥散,获得了较好的球化组织。该快速球化退火工艺与传统球化退火工艺相比,节能降耗并提高生产效率。

关键词: SKS51合金工具钢, 快速球化退火, 剩余碳化物

Abstract: Based on devoiced eutectoid transformation ( DET) principle, the fast spheroidizing annealing process for 4 mm plate of alloy tool steel SKS51 (/% : 0.75 ~0. 85C, 0.20 ~ 0. 50Cr- 1.30 ~2, OONi) produced by CSP line has been tested and studied in laboratory. Results show that with austenizing at 730℃ for lOmin then cooling in furnace to 650 ℃ isothermal-spheroidizing for 120min, the steel gets better sphroidal structure with more uniform-distributing residual carbide particles. As compared with traditional spheroidizing annealing process the fast spheroidizing annealing process can save energy and reduce consumption and increase productivity.

薛刚, 余驰斌, 鲍思前, 熊文娟, 张亚娟, '张会龙, 毛新平, 陈麒琳. SKS51合金工具钢的快速球化退火工艺的试验研究[J]. 特殊钢, 2012, 33(1): 54-56.

Xue Gang , Yu Chibin, Bao Siqian , Xiong Wenjuan, Zhang Yaqi , Zhang Huilong , Mao Xinping , Chen Qilin. Test and Study on Fast Spheroidizing Annealing Process for an Alloy Tool Steel SKS51[J]. Special Steel, 2012, 33(1): 54-56.