50 t UHP EAF-LF-VD-CC流程生产MnVS系非调质钢的质量控制

特殊钢 ›› 2013, Vol. 34 ›› Issue (4): 43-45.

50 t UHP EAF-LF-VD-CC流程生产MnVS系非调质钢的质量控制

赵冠夫^1,2, 王静松¹, 吴兵^1,2, 马传庆²

1北京科技大学冶金与生态工程学院，北京100083 ；
2莱钢特钢事业部，莱芜271104

收稿日期:2013-02-27 出版日期:2013-08-01 发布日期:2022-09-11
作者简介:赵冠夫( 1979-),男，硕士研究生，工程师,2006年安徽工业大学毕业,炼钢工艺和冶金质量研究。

Quality Control of Non-Quenched and Tempered Steel MnVS Series Produced by 50 t UHP EAF-LF-VD-CC Flow Sheet

Zhao Guanfu^1,2, Wang Jingsong¹, Wu Bing^1,2, Ma Chuanqing²

1 Metallurgical and Ecological Engineering School, University of Science and Technology, Beijing 100083 ；
2 Special Steel Division, Laiwu Iron and Steel Group Co Ltd, Laiwu 271104

Received:2013-02-27 Published:2013-08-01 Online:2022-09-11

摘要/Abstract

摘要： 针对MnVS系非调质钢生产时存在的硫收得率低、钢水可浇性差、钢材探伤合格率低等冶金质量问题,通过稳定喂硫线速度80～100 m/min,采用预熔精炼渣、精炼配加石灰使渣碱度≥3.0,优化连铸和轧制工艺参数等工艺措施,使硫平均收得率达84%,铸坯碳偏析程度减少,钢材低、高倍组织和顶锻一次合格率分别达100%、99.10%和100%,产品实物质量及综合性能均满足用户需求。

Abstract: According to existing metallurgical quality issue for production of non-quenched and tempered steel MnVS series including low yield of sulfur, poor casting characteristics and low qualified ratio of steel products in nondestructive testing, with stable sulfur wire feeding speed 80 ~ 100 m/min, using premelted refining slag, slag basicity ≥3. 0 by adding lime in refining and optimizing casting and rolling parameters etc. the average yield of sulfur is up to 84%, carbon segregation extent decreases, first qualified ratio of macro-, micro-structure and heading upsetting of products is respectively up to 100%, 99. 10% and 100%, the products quality and comprehensive properties all meet the requirement of user.

赵冠夫, 王静松, 吴兵, 马传庆. 50 t UHP EAF-LF-VD-CC流程生产MnVS系非调质钢的质量控制[J]. 特殊钢, 2013, 34(4): 43-45.

Zhao Guanfu, Wang Jingsong, Wu Bing, Ma Chuanqing. Quality Control of Non-Quenched and Tempered Steel MnVS Series Produced by 50 t UHP EAF-LF-VD-CC Flow Sheet[J]. Special Steel, 2013, 34(4): 43-45.