ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2019, Vol. 40 ›› Issue (2): 46-48.

• 工艺技术 • 上一篇    下一篇

泡沫渣抑制剂在60 t转炉炼钢生产中的应用

兴超1, 姚娜1, 张利武2   

  1. 1济源职业技术学院冶金化工系,济源459000;
    2石横特钢集团有限公司材料工艺部,肥城271612
  • 收稿日期:2018-10-11 出版日期:2019-04-01 发布日期:2022-05-19
  • 作者简介:兴 超(1980-),男,讲师,硕士(2011年安徽工业大学),冶金技术研究。

Application of Foam Slag Inhibitor in 60 t   Converter Steelmaking Production

Xing Chao1, Yao Na1 , Zhang Liwu2   

  1. 1 Department of Metallurgy and Chemical Engineering, Ji yuan Vocational and Technical College, Ji yuan 459000;
    2 Department of Materials and Technology, Shiheng Special Steel Group Co Ltd, Feicheng 271612)
  • Received:2018-10-11 Published:2019-04-01 Online:2022-05-19

摘要: 分析了转炉炼钢喷溅产生的原因和危害,并探讨泡沫渣抑制剂成分、加入量和加入方式对喷溅的影响。生产结果表明,抑制剂最佳的成分/%:10~15C,35~40Ca0,5~10MgO,25~30挥发分+灰分,粒度20~50mm,加入量2 kg/t,泡沫渣抑制使用后炉渣成分/%:43. 97CaO, 17. 95SiO2,6. 8MgO,碱度2. 45,达到了预期效果,喷溅量由使用前300~600 kg/炉减少至100~300 kg/炉,吨钢可降低生产成本5~10元。

Abstract: The cause and damage to produce splashing in converter steelmaking are analyzed and the effect of foam slag inhibitor ingredient, adding amount and adding method on splashing has been discussed. The production results show that with using the optimum ingredient of inhibitor /% : 10~15C, 35~40CaO, 5~l0MgO, 25~30 volatile-matters + ash, inhibitor size 20 ~ 50 mm, adding amount 2 kg/t and with after using foam slag inhibitor the ingredient of slag is /% : 43.97CaO, 17.95SiO2 , 6.8MgO and basicity 2.45, the expected aim is achieved to decrease slag splashing amount from original 300 - 600 kg/fumace to 100 ~300 kg/furnace, and the production cost per ton steel decreases by 5 ~ 10 yuan.

Key words: 60 t Converter, Splashing, Foam Slag, Inhibitor ,