高碳绞线钢SWRH82B中心碳偏析控制实践

特殊钢 ›› 2019, Vol. 40 ›› Issue (5): 24-27.

高碳绞线钢SWRH82B中心碳偏析控制实践

王文培, 刘列喜, 李海, 徐雷 , 范石伟, 丁理

芜湖新兴铸管有限责任公司炼钢厂，芜湖241000

收稿日期:2019-03-20 出版日期:2019-10-01 发布日期:2022-05-12
作者简介:王文培(1983-)，女，硕士(2016年北京科技大学)，工程师， 2006年安徽科技大学(本科)毕业，工艺质量控制和优化研究。

High Carbon Stranded Steel SWRH82B Central Carbon Segregation Control Practice

Wang Wenpei,Liu Liexi,Li Hai,Xu Lei,Fan Shiwei , Ding Li

Wuhu Xinxing Casting Pipe Co Ltd. Steel Mill,Wuhu 241000

Received:2019-03-20 Published:2019-10-01 Online:2022-05-12

摘要/Abstract

摘要： 针对高碳钢SWRH82B钢绞线拉丝材笔尖断裂及网碳超标缺陷,研究了180 mm×180 mm断面高碳钢SWRH82B方坯中心碳偏析产生机理,分析了钢水过热度、拉速、末端电磁搅拌、二冷强度等因素对SWRH82B钢碳偏析的影响。结果表明,180 mm×180 mm断面SWRH82B钢中心碳偏析与过热度存在拟合关系为y=1.0929-0.0088x+3.1069×10^-4x²_过热度,为控制碳偏析最佳工艺参数为过热度20～30℃;拉速1.4 m/min;末端电磁搅拌电流400 A频率10 Hz;二冷采用弱冷比水量0.4 L/kg。

Abstract: For the high carbon SWRH82B steel strand drawing wire tip break and net carbon over standard defect,we studied the mechanism of carbon segregation in the center of 180 mm x 180 mm high carbon steel SWRH82B billet. The superheat extent of molten steel, casting speed, finished electromagnetic stirring and two-stage cooling water strength were analyzed. The results show that the relationship between carbon segregation and superheat of steel SWRH82B in 180 mm X 180 mm section is y = 1.0929 - 0.008x + 3. 1069 x 10^-4x²_superheat ,and the optimum process parameter for controlling carbon segregation is superheat extent 20 ~30 °C , the pulling speed is 1.4 m/min, the terminal electromagnetic stirring current is 400 A frequency 10 Hz and the weak cooling ratio 0.4 L/kg of second cooling wate is adopted.

王文培, 刘列喜, 李海, 徐雷, 范石伟, 丁理. 高碳绞线钢SWRH82B中心碳偏析控制实践[J]. 特殊钢, 2019, 40(5): 24-27.

Wang Wenpei, Liu Liexi, Li Hai, Xu Lei, Fan Shiwei , Ding Li. High Carbon Stranded Steel SWRH82B Central Carbon Segregation Control Practice[J]. Special Steel, 2019, 40(5): 24-27.