电热合金钢0Cr21A16NbRE电渣重熔用渣的研究

特殊钢 ›› 2020, Vol. 41 ›› Issue (1): 6-11.

所属专题：特种冶炼；稀土冶金

电热合金钢0Cr21A16NbRE电渣重熔用渣的研究

王振虎^1,2, 李彬^1,2 , 郭汉杰^1,2, 郭靖^1,2

1北京科技大学冶金与生态工程学院，北京100083 ;
2高端金属材料特种熔炼与制备北京市重点实验室，北京100083

收稿日期:2019-07-23 出版日期:2020-02-01 发布日期:2022-04-18
作者简介:王振虎(1982-),男，硕士生，助理工程师,2012年北京科技大学(本科)毕业，炼钢及电渣重熔研究。

Study on Slag for Electroslag Refining of Electrothermal Alloy Steel 0Cr21A16NbRE

Wang Zhenhu^1,2,Li Bin^1,2, Guo Hanjie^1,2, Guo Jing^1,2

1 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083;
2 Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials, Beijing 100083

Received:2019-07-23 Published:2020-02-01 Online:2022-04-18

摘要/Abstract

摘要： 研究了电热合金钢OCr21A16NbRE电渣重熔用渣70%CaF₂-25%Al₂O₃-5%CaO在正常重熔制度下（A=2800 A,V=30 V）液态炉渣自然冷却与经过渣钢反应后冷却至固相渣的各部位成分与物相,分析了钢液中稀土元素的烧损。结果表明,液渣冷却的固相中不含稀土元素,其成分点位于CaF₂-CaO·2Al₂0₃-Ca0·6Al₂0₃组成的子三角形内,各层化学成分和物相不同,但以CaF₂为主。炉渣经渣钢反应后可分为五层,颜色、物相各不相同;CaF2含量最高部位在上两层,Al₂O₃含量从无到有逐层升高;各层均检测到稀土氧化物,中间层及最底层（钢液滴落处）含量较高,稀土相中以铈镧的铝酸盐（Ce,La）x（AlO₂）y为主相,该相结构致密硬度高。计算表明,在中下层区域,炉渣氧化性较强,钢中稀土元素主要在此部位被氧化。增加渣中Y₂0₃量有利于提高电渣锭中稀土元素Y的含量。

关键词: 电渣重熔, 电热合金, 化学反应, 相, 热力学

Abstract: The ingredient and phases of solid phase slag without remelting liquid slag air cooling and with liquid-slag reaction remelting slag, air cooling of slag 70% CaF₂-25% Al₂O₃-5% CaO for ESR of electrothermal alloy steel 0Cr21A16NbRE with normal remelting process (A =2800 A,V =30 V) are studied,and the burning loss of RE elements in liquid is analyzed. The results show that without remelting air cooling slag has not RE elements it locates in CaF₂ -CaO • 2Al₂O₃-CaO • 6A1₂O₃ sub-triangle. The solid phase slag with liquid-slag reaction can be divided into five layers with different colors, difierent phase, the content of CaF₂ on the top is highest and decreases layer by layer, A1₂O₃ increase simultaneously ,RE oxide is found in layers and at the middle and bottom its content is higher, (Ce,La)x( A10₂ ) y is major RE oxide phase in slag, which density is high. It is obtained by calculation that slag oxidability is stronger in the middle and bot¬tom of slag,RE element in steel is oxided here. Increasing the Y₂O₃ amount in slag is favourable to increase the RE element Y content in ESR ingot.

王振虎, 李彬, 郭汉杰, 郭靖. 电热合金钢0Cr21A16NbRE电渣重熔用渣的研究[J]. 特殊钢, 2020, 41(1): 6-11.

Wang Zhenhu, Li Bin, Guo Hanjie, Guo Jing. Study on Slag for Electroslag Refining of Electrothermal Alloy Steel 0Cr21A16NbRE[J]. Special Steel, 2020, 41(1): 6-11.

参考文献

[1]Sachan R and Park J W. Formation of Nanodispersoids in Fe-Cr-Al/ 30% T1B₂ Composite System during Mechanical Alloying] J]. Journal of Alloys and Compounds ,2009,485 (1-2) ： 1-729.
[2]Park D J,Kim H G and Park Y,et al. A Study of the Oxidation of FeCrAl Alloy in Pressurized Water and High-Temperature Steam Environment [J ],Corrosion Science,2015,94.459-465.
[3]Xuemin W ,Yan Z and Xinming W,et al. The Spread Into Terahertz Radiation Using FeCrAl Alloys Wires[ J]. Materials Letters,2015, 153：81-84.
[4]Checmanowski J,Pelczarska A J and Szczygiel I,et al. Influence of Ceria and Yttria on the Protective Properties of SiO₂-Al₂O₃ Coatings Deposited by Sol-Gel Method on FeCrAl Alloy [J]. Journal of Thermal Analysis and Calorimetry,2016,126(2) ：371-380.
[5]兰杰，丁文江,姜周华，等.CaO-Al₂O₃-CaF₂-SiO₂-MgO精炼渣系起泡性能与炉渣物理性质的关系[J] •特殊钢，1999,20 (1)： 15-17.
[6]茅洪祥，李正邦.低氟渣及无氟渣电渣重熔研究[J].钢铁研究学报,1983,3(4):597-611.
[7]梁连科，杨怀，郭仲文.炉渣物理性质对电渣重熔过程电耗的影响[J].东北大学学报：自然科学版,1993,14(2):171-175.
[8]李正邦，张家雯,王庆和，等.渣系及充填比对电渣重熔电耗的影响[J].特殊钢，1983,4(3):3446.
[9]郭仲文，王翠香,梁连科.含CaF?熔渣体系挥发率测定的研究 [J].东北大学学报：自然科学版，1987(3) ：381-386,
[10]陈艳梅，赵俊学，樊君，等.电渣重熔过程中渣成分变化的研究[J].特殊钢,2010,31(6):7-9.
[11] Zhao J, Chen Y and Li X, et al. Mechanism of Slag Composition Change During Electroslag Remelting Proeess[ J]. Journal of Iron and Steel Research, International ,2011,18(10) : 24-53.
[12]Kjellqvist L ,Mason P and Chen Q,et al. A Thermodynamic Data-base for the Al₂O₃ - CaF₂ - CaO System [ M ] 〃 Proceedings of the 2013 International Symposium on Liquid Metal Processing & Casting. Springer International Publishing,2013 ：21 -28.
[13] Zaitsev A I, Korolyov N V and Mogutnov B M. Phase Equilibria in the CaF₂ -Al₂0₃ -CaO System [ J ]. Journal of Materials Science, 1991,26(6):1588-1600.
[14]Chatteijee A K and Zhmoidin G I. The Phase Equilibrium Diagram of the System CaO-Al₂O₃ -CaF₂ [ J ] • Journal of Materials Science, 1972,7(1)： 93-97.
[15]Liu Y,Zhang Z and Li G,et al. Investigation of Fluoride Vaporization From CaF₂CaOAl₂O₃ Slag for Vacuum Electroslag Remelting [J]. Vacuum,2018,158； 6-13.
[16]Ries R and Schwerdtfeger K. Contribution to the Phase Diagram CaF₂-CaO-Al₂0₃ [ J]. Archiv Fttr Das Eisenhdttenwesen, 1980,51 (4):123-129.
[17]Ren Y,Zhang L and Yu L,et al. Yield of Y, La,Ce in High Temperature Alloy during ElectroSlag Remelting Process[ J]. Metallur-gical Research & Technology,2016,113(4) ：405.1-9.
[18]李大纲,卜庆才，娄太平，等.RE₂O₃-CaO-SiO₂-CaF₂-MgO- Al₂O₃系炉渣的凝固组织[J].钢铁研究学报,2004,16(1):30- 33.
[19]Huang X, U B and Liu Z. Three-Dimensional Mathematical Model of Oxygen Transport Behavior in Electroslag Remelting Process] J], Metallurgical and Materials Transactions B,2018,49(2) ：709-722.
[20]于梦曦，郭汉杰，郭靖，等.电渣冶金熔炼Fe-Cr-Al高温合金抑制例、舗稀土氧化的研究[J].材料与冶金学报,2016,15 (4),248-253.
[21]王振虎，李少英，郭汉杰，等.CaO含量对CaF₂-Al₂O₃-CaO- Ce₂O₃渣系中Ce₂O₃行为的影响[J] .有色金属科学与工程， 2019,10(3).6-13.

电热合金钢0Cr21A16NbRE电渣重熔用渣的研究

Study on Slag for Electroslag Refining of Electrothermal Alloy Steel 0Cr21A16NbRE

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郑安民, 樊轩宇, 黄增鑫, 毛旺旺, 于彦冲, 张金玲, 王社斌. 稀土Ce对20MnTiB冷镦钢中夹杂物演变的影响[J]. 特殊钢, 2024, 45(6): 37-47.
[2]	任吉, 燕云, 田家龙, 王礼超, 蒋成钢, 王琳, 姜周华. La处理对H13热作模具钢中夹杂物的影响[J]. 特殊钢, 2024, 45(4): 117-123.
[3]	林腾昌, 李龙飞, 程挺. Mn18Cr18N加压冶炼的氮含量精准控制工艺分析与实验[J]. 特殊钢, 2024, 45(4): 111-116.
[4]	徐太旭, 何志军, 杨鑫, 乔西亚, 黄育飞. Si对铸态高碳铬轴承钢中渗碳体类型转变的影响机理[J]. 特殊钢, 2024, 45(3): 15-21.
[5]	章东海, 徐荣川, 郭畅, 许勇, 张晓磊, 潘明旭. AOD法冶炼护环用奥氏体不锈钢1Mn18Cr18N[J]. 特殊钢, 2024, 45(2): 46-49.
[6]	孙文强, 周珠, 徐阿敏, 王哨兵, 苏诚, 沈强. 热处理工艺对高铬低活化铁素体-马氏体钢力学性能的影响[J]. 特殊钢, 2024, 45(2): 105-111.
[7]	吴翔宇, 董丙成, 王梓菲, 田钱仁, 付建勋. La-Ce对GCr15轴承钢中夹杂物的改质效果及机理[J]. 特殊钢, 2024, 45(2): 39-45.
[8]	罗小雨, 郭靖, 郭汉杰, 李泽友. IN718镍基高温合金熔体脱氮和TiN析出热力学研究[J]. 特殊钢, 2024, 45(1): 33-41.
[9]	苏学虎. 铸造镍基合金CW12MW与CW6MC平衡凝固及析出热力学模拟[J]. 特殊钢, 2023, 44(6): 31-38.
[10]	王伟健, 杨文, 任英, 张立峰. 精准钙处理指导软件开发及在特殊钢生产中的应用[J]. 特殊钢, 2023, 44(6): 25-30.
[11]	苏学虎. 铸造双相不锈钢CD3MWCuN凝固与析出热力学模拟[J]. 特殊钢, 2023, 44(4): 28-34.
[12]	张威, 王旗, 王丽君, 李建民. S31254超级奥氏体不锈钢凝固相转变的热力学分析[J]. 特殊钢, 2023, 44(4): 8-14.
[13]	张保忠, 孙国敏, 李志伟, 彭勇生, 刘万善, 朱施利. 65Mn钢LF精炼渣系优化及工业试验[J]. 特殊钢, 2023, 44(4): 65-69.
[14]	李健, 凌海涛, 柴锋, 罗小兵, 常立忠. 电渣重熔过程中渣系对NiCrMoV合金钢电渣锭洁净度的影响[J]. 特殊钢, 2023, 44(4): 35-42.
[15]	李学, 吴华杰, 刘维, 孙彦辉, 李明. 铝脱氧55Cr3弹簧钢轻钙处理的实践与分析[J]. 特殊钢, 2023, 44(4): 49-53.