高碳铬GCr15轴承钢中镁铝夹杂物形成与控制工艺实践

特殊钢 ›› 2022, Vol. 43 ›› Issue (4): 41-45.

所属专题：夹杂物控制

高碳铬GCr15轴承钢中镁铝夹杂物形成与控制工艺实践

蒋鲤平，徐建飞，王昆鹏，王郢，王立涛，陈廷军

中天钢铁集团有限公司第三炼钢厂，常州213011

收稿日期:2021-12-02 出版日期:2022-08-01 发布日期:2022-08-12
作者简介:蒋鲤平(1983-),男,工程师,2005年东北大学(本科)毕业, 转炉,精炼，连铸生产及产品质量控制。

Formation of Magnesium-Aluminum Inclusion in High Carbon Chromium GCr15 Bearing Steel and Control Process Practice

JIANG Liping, XU Jianfei, WANG Kunpeng, WANG Ying, WANG Litao, CHEN Tingjun

Zenith Steel Group Co Ltd, No.3 Steelmaking Plant, Changzhou 213011

Received:2021-12-02 Published:2022-08-01 Online:2022-08-12

摘要/Abstract

摘要： GCr15钢的生产流程为120 t BOF-LF-RH-CC工艺。BOF出钢加200 kg铝块进行强脱氧,同时LF过程控制Al含量至0.030%～0.045%,LF结束夹杂物主要为MgO·Al₂O₃,RH真空后MgO·Al₂O₃夹杂物被去除,钢水中夹杂物以钙铝酸盐为主,但是连铸浇铸过程MgO·Al₂O₃夹杂物又会重新生成。因为LF精炼过程Al-MgO和C-MgO反应的存在,高碳铝脱氧GCr15轴承钢LF精炼结束更容易获得MgO·Al₂O₃夹杂物,并促进中间包钢水MgO·Al₂O₃夹杂物重新生成。当BOF出钢仅加40 kg铝块进行预脱氧,LF结束钢水MgO·Al₂O₃夹杂物数量显著降低,同时中间包钢水中MgO·Al₂O₃夹杂物不再重新生成。此外,将低钛低铝硅铁由出钢过程改为LF过程加入,也可以有效控制钢水中MgO·Al₂O₃夹杂物数量。

Abstract: The GCr15 steel production flow steel is 120 t BOF-LF-RH-CC process. As adding 200 kg aluminum block at BOF tapping for strong deoxidation and controlling the aluminum content 0.030% ~ 0.045% in steel in LF process, at end LF the main inclusions in steel are MgO ·Al₂O₃and the MgO.Al₂O₃ inclusions are removed during RH degassing and the calcium aluminate inclusions are main inclusions in steel after RH. However, but MgO·Al₂O₃inclusions are formed again in the tundish steel. Due to the existence of Al-MgO and C-MgO reactions in LF refining process, the MgO ·Al₂O₃ inclusions could be formed again after LF refining in high carbon aluminum deoxidized GCr15 bearing steel. However, when just adding 40 kg aluminum block for preliminary deoxidation in the BOF tapping process, the amount of MgO·Al₂O₃ inclusions in steel significantly decrease after LF refining, and the regeneration of MgO.Al₂O₃ inclusions in tundish steel could be prevented. In addition, adding low titanium and low aluminum ferrosilicon in the LF refining process instead of adding in tapping process effectively control the amount of MgO · Al₂O₃ inclusions in steel.

蒋鲤平, 徐建飞, 王昆鹏, 王郢, 王立涛, 陈廷军. 高碳铬GCr15轴承钢中镁铝夹杂物形成与控制工艺实践[J]. 特殊钢, 2022, 43(4): 41-45.

JIANG Liping, XU Jianfei, WANG Kunpeng, WANG Ying, WANG Litao, CHEN Tingjun. Formation of Magnesium-Aluminum Inclusion in High Carbon Chromium GCr15 Bearing Steel and Control Process Practice[J]. Special Steel, 2022, 43(4): 41-45.

参考文献

[1]郝鑫，王新华,杨光维，等.高级别船板钢炉外精炼过程洁净度研究[J]北京科技大学学报,2014, 36(11)： 1471-1475.
[2]李强，王新华,黄福祥，等.X80管线钢LF-RH二次精炼过程夹杂物行为及控制[J].特殊钢,2011, 32(4)： 26-30.
[3]李强，王新华,李海波，等.低合金高强钢中非金属夹杂物的改性[J].北京科技大学学报,2012, 34(11)： 1262-1267.
[4]杨光维，郝鑫，杨叠，等.GCr15轴承钢冶炼过程钢水洁净度变化[J].钢铁,2014, 49(11)： 31-35.
[5] Yang J, Chen B. T, Tang W, et al. Experimental Study to Improve the Castability of Aluminum Killed Cold Heading Steel [J]. Steel Research International, 2013, 84(8) : 703-712.
[6] Herrera M, Castro F, Castro M, et al. Modification of Al₂O₃ Inclusions in Medium Carbon Aluminium Killed Steels by AlCaFe Additions [J]. Ironmaking and Steelmaking, 2006, 33(1), 45-51.
[7] Li M, Li S, Ren Y, et al. Modification of Inclusions in Linepipe Steels by Ca-Containing Ferrosilicon During Ladle Refining [J]. Ironmaking and Steelmaking, 2020 , 47(1)： 6-12.
Xu J, Wang K, Wang Y, et al. Effects of Ferrosilicon Alloy, Si Content of Steel, and Slag Basicity on Compositions of Inclusions
During Ladle Furnace Refining of Al-Killed Steel [J]. Journal of Iron and Steel Research, International, 2020, 27(9) : 1011-1017.
[9 ] Xu J, Wang K, Wang Y, et al. Influence Mechanism of Silicon Content in Al-Killed Steel on Compositions of Inclusions During LF Refi- ning[ J ]. Ironmaking and Steelmaking, 2021,48(2) : 127-132.
[10 ] Deng Z, Liu Z, Zhu M, et al. Formation, Evolution and Removal of MgO .Al₂O₃ Spinel Inclusions in Steel [J]. ISIJ International, 2021, 61(1) ： 1-15.
[11] Mizuno K, Todoroki H, Noda M et al. Effects of Al and Ca in Ferrosilicon Alloys for Deoxidation on Inclusion Composition in Type 304 Stainless Steel [J]. Iron Steelmaker, 2001, 28(8): 93-101.

高碳铬GCr15轴承钢中镁铝夹杂物形成与控制工艺实践

Formation of Magnesium-Aluminum Inclusion in High Carbon Chromium GCr15 Bearing Steel and Control Process Practice

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价