唐钢新区铁水KR高效脱硫的工业试验研究

doi:10.20057/j.1003-8620.2022-00043

特殊钢 ›› 2023, Vol. 44 ›› Issue (1): 25-29.DOI: 10.20057/j.1003-8620.2022-00043

唐钢新区铁水KR高效脱硫的工业试验研究

潘宏伟^1,2，张仕骏¹，单庆林¹，路博勋¹，张贺君³，肖鹏程^2,4，邝霜¹

1. 河钢唐钢技术中心
2. 河北省高品质钢连铸技术研究中心
3. 河钢集团唐钢公司热轧事业部
4. 华北理工大学冶金与能源学院

收稿日期:2022-07-27 出版日期:2023-02-01 发布日期:2023-01-28
作者简介:潘宏伟(1984-),男，高级工程师，博士；
基金资助:
河北省创新能力提升计划项目(20567696H)；
河北省“三三三人才工程”资助项目(A202102002)；
唐山市人才资助项目(A202010004)；

Industrial Experiment Study on Hot Metal KR Highly Efficient Desulfurization at Tangsteel New Plant

Pan Hongwei^1,2, Zhang Shijun¹, Shan Qinglin¹, Lu Boxun¹, Zhang Hejun², Xiao Pengcheng^2,4, Kuang Shuang¹

1 R&D Center,HBIS Tangsteel,Tangshan 063000;
2 Hot Rolling Division of Tangsteel Co., Ltd.,He Steel Group, Tangshan 063600;
3 Hebei Engineering Research Center of High Quality Steel Continuous Casting,Tangshan 063000;
4 College of Metallurgy and Energy, North China University of Science and Technology,Tangshan 063210

Received:2022-07-27 Published:2023-02-01 Online:2023-01-28

摘要/Abstract

摘要： 通过在唐钢新区200 t铁水包中取样,研究了KR脱硫过程中铁水中[S]和脱硫渣中(S)含量的变化规律。结果表明,在KR 10 min的机械搅拌过程中,铁水硫从初始0.038%下降到0.002%,脱硫渣(S)从初始0.028%上升到3.28%。脱硫率从初始68%下降到33%。KR脱硫的限制性环节在后期的7～10 min,这是目前仍尚未明确的问题。为了提高KR处理过程末段脱硫效率,采用了阶跃式变化搅拌速度的工艺思路,并开展工业试验,在不增加搅拌时间的情况下,搅拌速度从90～110 r/min降低至45～90 r/min,脱硫剂用量从8～10 kg/t降至4.0～6.5 kg/t。阶跃控制搅拌速度的KR脱硫模式,在实际生产中具有较强的应用价值。

关键词: 铁水KR机械搅拌, 脱硫模式, 阶跃式搅拌速度, 高效脱硫

Abstract: During KR desulfurization process, the variation of[S] in hot metal and(S)in desulfurization slag is studied accordingly, by sampling in the 200t hot metal ladle at Tangsteel new plant. It shows that, during the 10 minutes of KR stirring process, the sulfur in hot metal decrease from initial 0.038% to 0.002%, and the sulfur in desulfurization slag is increasing from initial0.028% to3.28%. while the desulfurization rate keeps decreasing from 68% to33%. So the limiting link of KR desulfurizing happens at the last 7 to 10 minutes, which not clear in many studies at present. In order to improve the desulfurizing efficiency for the last few minutes, step-changing stirring speed is adopted and applied for the practical industry experiments, the stirring speed decrease from 90- 110r/min to45-90 r/min, and then the amount of desulfurizer can be reduced from 8- 10 kg/tto4.0-6.5 kg/t without increasing stirring time. So, this kind of KR desulfurization model of step-changing stirring speed and immerge depth of impeller has a potential application value for practical industry production.

Key words: Hot Metal KR Mechanical Stirring, Desulfurization Model, Step-Changing Stirring Speed, Highly-Efficient Desulfurizing

潘宏伟, 张仕骏, 单庆林, 路博勋, 张贺君, 肖鹏程, 邝霜. 唐钢新区铁水KR高效脱硫的工业试验研究[J]. 特殊钢, 2023, 44(1): 25-29.

Pan Hongweil, Zhang Shijun, Shan Qinglin, Lu Boxun, Zhang Hejun, Xiao Pengcheng, Kuang Shuang. Industrial Experiment Study on Hot Metal KR Highly Efficient Desulfurization at Tangsteel New Plant[J]. Special Steel, 2023, 44(1): 25-29.

参考文献

[1]欧阳德刚，王庆方，刘守堂，等.KR脱硫搅拌器的技术现状与发展方向[J].武钢技术，2005(5);58-62.
[2]张茂林，徐安军.KR法与喷吹法在铁水脱硫中应用的比较[J]. 炼钢，2009,25(5):73-77.
[3] Nakai Y,Kikuchi N,Iwasa M,et al.Development of Slag Recycling Process in Hot Metal Desulfurization with Mechanical Stirring[J] Steel Research Intenational,2009,80(10):727-732.
[4]程新德，孙江龙，周家健，等.KR法铁水脱硫的流动数值模拟分析[J].武汉科技大学学报，2015,38(5):330-335.
[5]闵昌飞，但斌斌，牛清勇，等.挡板改善KR法脱硫搅拌效果的数值分析[J].武汉科技大学学报，2020,43(5):340-345.
[6]Iou W,WangX,LiuZ,et al,Numerical Simulation of Desulfurization Bchavior in Ladle with Bottom Powder Injection [J]. ISIJ International,2018,58(11):2042-2051.
[7]王坤，刘燕，张廷安.底吹-机械搅拌耦合铁水脱硫的模拟[J].东北大学学报(自然科学版),2018,39(6):818-822.
[8]董佳鹏，张立峰，赵艳宇，等.KR法铁水脱硫过程铁水混合现象的水模型[J].钢铁研究学报，2021,33(2):103-109.DOI:10. 13228/j.boyuan.issn1001-0963.20200117.
[9]ChoMK,ChengJ,Park JH,et al.Hot Metal Desulfurization by CaO-SiO₂-CaF₂-Na₂O Slag Saturated with MgO [J]. ISIJ Intemational,2010,50(2):215-221.
[10] DongK,Iong WU,Liu WJ,et al.Desulfurization of CaO-Al2O₃- SiO₂-TiO₂ Slag System[J]. ISIJ Intemational,2014,54(10): 2248-2254.
[11] Matsui A,Uchida YI,Kikuchi N,et al.Effects of Temperature and Oxygen Potential on Removal of Sulfur from Desulfurization Slag [J].Tetsu-to-Hagane,2016,102(10):553-559.
[12]Nakai Y,SumiI,Kikuchi N,et al.Aggregation Behavior of Des- ulfurization Flux in Hot Metal Desulfurization with Mechanical Stir- ring[J].ISIJ International,2013,53(8):1411- 1419.
[13]Nakai Y,Sumil,Kikuchi N,et al.Powder Blasting in Hot Metal Desulfurization by Mechanical Stirring Process [J].ISIJ International,2017,57(6):1029- 1036.
[14] Takahashi K,Utagawa K,Shibata H,et al.Influence of Solid CaO and Liquid Slag on Hot Metal Desulfurization[J].Transactions of the lron& Steel Institute of Japan,2012,52(1):10- 17.
[15]喻同信，马星火，何腾，等.降低KR脱硫剂单耗试验[J].中国冶金，2017,27(9):35-37.
[16]孙亮，朱良，赵晓东.3种铁水脱硫工艺的应用实践[J].中国冶金，2018,28(3):50-53.
[17]吴明，李应江，单喷、复喷、KR法脱硫工艺在马钢的实践分析[J].中国冶金，2008,18(12);5.

唐钢新区铁水KR高效脱硫的工业试验研究

Industrial Experiment Study on Hot Metal KR Highly Efficient Desulfurization at Tangsteel New Plant

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价