固溶和时效处理时间对IN706合金组织与性能的影响

特殊钢 ›› 2022, Vol. 43 ›› Issue (4): 75-81.

固溶和时效处理时间对IN706合金组织与性能的影响

张冰冰¹，白亚冠¹, 张鑫¹，聂义宏^2,3

1天津重型装备工程研究有限公司，天津300457,
2中国第一重型机械股份公司，齐齐哈尔161042；
3黑龙江省高端核电装备智能制造重点实验室，齐齐哈尔161042

收稿日期:2021-11-29 出版日期:2022-08-01 发布日期:2022-08-21
作者简介:张冰冰(1994-)，男，硕士(2020年北京科技大学)，助理工程师,2017年河北科技大学(本科)毕业，大型镍基合金锻件开发。
基金资助:
黑龙江省自然科学基金杰出青年项目(JQ2021E007)

Effect of Solution and Aging Treatment Time on Structure and Mechanical Properties of IN706 Alloy

ZHANG Bingbing¹, BAI Yaguan¹, ZHANG Xin¹, NIE Yihong^2,3

1 Tianjin Heavy Industries Research & Development Co Ltd, Tianjin 300457；
2 China First Heavy Industries Co Ltd, Qiqiha'er 161042 ；
3 Heilongjiang Provincial Key Laboratory of Intelligent Manufacturing for Advanced Nuclear Power Equipment, Qiqiha, er 161042

Received:2021-11-29 Published:2022-08-01 Online:2022-08-21

摘要/Abstract

摘要： 研究了增加标准的980℃1h固溶-825℃ 2.5 h稳定化-720℃8 h+620℃8 h时效的处理时间对IN706合金(/%:0.03C,41Ni,16Cr,1.6Ti,2.9Nb)组织和性能的影响。结果表明,固溶处理时间(1～3 h)的增加,主要影响合金的晶粒尺寸,从而影响合金的性能;随稳定化处理时间(2.5～5 h)的增加,η相析出增多,导致强化相形成元素减少,合金性能亦有所下降,并对合金塑性和韧性产生不良影响;增加一级(8～18 h)和二级(8～36 h)时效处理的时间,会促进γ"和γ’相的析出,并且其形态也会发生变化,进而对合金的性能产生影响,但固溶1～3 h,稳定化2.5～5 h,以及一级时效8～18 h,二级时效8～36 h时合金的力学性能指标均满足标准要求。

Abstract: The influence of treated time of standard treated process 980 ℃ 1 h solid solution-825 ℃ 2. 5 h stabilizing- 720 ℃ 8 h +620 ℃ 8 h aging on the structure and properties of IN706 alloy (/% ：0. 03C,41Ni,16Cr,l. 6Ti,2. 9Nb) is studied. The results show that with the increase of the solid solution treatment time (1 ~3 h) , the grain size of the alloy will be affected to a certain extent, thereby affecting the properties of the alloy； with the increase of the stabilizing treatment time (2. 5 ~5 h) , the precipitation of η increases, which leads to the reduction of strengthening phase forming elements, strength, plasticity and toughess of the alloy. Increasing the time of primary (8 ~18 h) and (8 ~36 h) secondary aging treatment will promote the precipitation of γ" and γ’ , and their morphology will also change, which will affect the properties of the alloy. But with solid solution for 1 ~3 h, stabilizing for 2. 5 ~5 h, primary aging for 8 ~18 h, secondary aging for 8 -36 h, the alloy mechanical properties all meet requirement of standard.

Key words: , IN706 Alloy, Heat Treatment, Microstructure, Mechanical Properties

张冰冰, 白亚冠, 张鑫, 聂义宏. 固溶和时效处理时间对IN706合金组织与性能的影响[J]. 特殊钢, 2022, 43(4): 75-81.

ZHANG Bingbing, BAI Yaguan, ZHANG Xin, NIE Yihong . Effect of Solution and Aging Treatment Time on Structure and Mechanical Properties of IN706 Alloy[J]. Special Steel, 2022, 43(4): 75-81.

参考文献

[1] Shibata T, Takahashi T and Taira J, et al. Ni-Fe Base Superalloy Forginegs for Land Based TuAines [J ]. The Thermal and Nuclear Power,2000,51:703-709.
[2]Joachim R, Martin G and Dominique D G, et al. Wrought Ni-Base Superalloys for Steam Turbine Applications Beyond 700 ℃ [J]. Advanced Engineering Materials,2003,5(7) ：469-483.
[3]Schilke P W and Schwant R C. Alloy 706 Use, Process Optimization ,and Future Directions for GE Gas Turbine Rotor Materials [J]. The Minerals, Metal & Materials Society,2001,10(4) ：25-34.
[4]Wanderka D N, Naundorf V and Banhart J, et al. Microstructural Characterization of Inconel 706 Alloy [J]. Surface and Interface Analysis,2004,36(5-6) ：546-551.
[5]Joachim R, Martin G and Dominique D G, et al. Wrought Ni-Base Superalloys for Steam Turbine Applications beyond 700%} [J]. Advanced Engineering Materials, 2003,5(7) ：469-483.
[6]Matsumoto 0, Honjo T and Yasumoto Y, et al. Grain Boundary Precipitates and Properties of Alloy 706 [C ]. Superalloys 718, 625, 706 and Various Derivatives, The Minerals, Metals and Materials Society,1997：389-399.
[7]信昕，孙文儒，段忠园，等.Nb,Al含量对GH706合金组织及力学性能的影响[J].稀有金属材料与工程,2011,40(11):5- 8.
[8]Jian W, Zhou L and Sheng L, et al. The Microstructure Evolution and its Effect on the Mechanical Properties of a Hot-Corrosion Resistant Ni-based Superalloy during Long-Term Thernal Exposure [J]. Materials & Design,2012,39：55-62.
[9]胥国华，黄烁，王磊，等.热处理工艺对GH4706合金显微组织与力学性能的影响[J].材料与冶金学报，2014,13(3)：
[10]Shibata T, Shudo Y and Yoshino Y. Effects of Aluminum, Titanium and Niobium on the Time-Temperature-Precipitation Behavior of AUoy 706 [C]. SuperaUoys. 1996： 153-162.
[11]白亚冠，聂义宏，朱怀沈，等.AbNb对700 P发电机组转子用GH706合金组织和拉伸性能的影响[J].特殊钢，2013, 34 (4)： 62-66.
[12]Kindratschuk V, Wanderka N and Banhart J. yr-y,r Co-precipitati- on in Inconel 706 Alloy A 3D Finite Element Study [J]. Materials Science and Engineering A,2006,417 ：82-89.
[13]Shibata T, Shudo Y and Takahashi T, et al. Effect of Stabilizing Treatment on Precipitation Behavior of Alloy 706 [C] . Superalloys. 1996.
[14]龙正东，马培立.IN706合金锭的均匀化处理[J].钢铁研究学报，1997,9(1):21-24.
[15]黄烁，王磊，张北江，等.稳化处理时间对GH4706合金显微组织演化及力学性能的影响[J].稀有金属材料与工程, 2015,44(1) ：219-223.
[16]Cozar R and Pineau A. Morphology of γ’ and γ" Precipitates and Thermal Stability of Inconel 718 Type Alloys [J] . Metallurgical & Materials Transactions B, 1973,4(1) ：47-59.