两种转炉炼钢终点控制模型的比较

特殊钢 ›› 2008, Vol. 29 ›› Issue (6): 20-22.

两种转炉炼钢终点控制模型的比较

郑忠¹，史战东¹，高小强²，代有训¹

1重庆大学材料科学与工程学院，重庆400045;
2重庆大学经济与工商管理学院，重庆400044

收稿日期:2008-05-12 出版日期:2008-12-01 发布日期:2022-12-06
作者简介:郑忠(1963-),女，博士，教授，博士生导师，冶金过程动态控制与复杂系统的仿真。

A Comparison between Two Models for Controlling End-point of Converter Steelmaking

Zheng Zhong¹,Shi Zhandong¹,Gao Xiaoqiang²， Dai Youxun¹

1 College of Materials Science and Engineering,Chongqing University,Chongqing 400045;
2 College of Economics and Business Administration,Chongging University,Chongqing 400044

Received:2008-05-12 Published:2008-12-01 Online:2022-12-06

摘要/Abstract

摘要： 分析了转炉炼钢静态控制与动态控制模型的方法、作用及功能关系。针对中小型炼钢转炉检测设备受限制的现状,从建模原理、方法特点和应用效果方面对建立的基于遗传算法-神经网络混合算法(CA-BP)的转炉炼钢终点优化控制静态模型和转炉炼钢终点预测的准动态控制模型进行了比较,认为混合算法可以提高静态模型的预测效果,而准动态模型可以反映转炉冶炼的动态操作和加料过程对一次倒炉时间和终点的影响。

关键词: 转炉炼钢, 终点控制, BP人工神经网络, 遗传算法

Abstract: Method,effect and function relation of static model and dynamic model for controlling end-point of converter steelmaking have been analyzed. According to the handicapped present situation of sensor for medium and small size converters,the comparison between optimal static model based on established GA-BP hybrid algorithm for predicting end-point of converter steelmaking and quasi-dynamic control model for predicting end-point of converter steelmaking has been compared from modeling principle,methodology and application effect. It is believed that prediction effect of a static model may be improved with GA-BP hybrid algorithm and the quasi-dynamic control model can reflect dynamic operation and the influence of operation in melting and charging process on first turndown time and end-point of converter steelmaking.

Key words: Converter Steelmaking,End-point Controlling,BP Neural Network,Cenetic Algorithm

郑忠, 史战东, 高小强, 代有训. 两种转炉炼钢终点控制模型的比较[J]. 特殊钢, 2008, 29(6): 20-22.

Zheng Zhong, Shi Zhandong, Gao Xiaoqiang, Dai Youxun. A Comparison between Two Models for Controlling End-point of Converter Steelmaking[J]. Special Steel, 2008, 29(6): 20-22.

[1]	刘增山, 冯亮花, 康小兵. 基于PSO-SVM模型的转炉终点预测[J]. 特殊钢, 2024, 45(3): 27-32.
[2]	余浩辰, 张本国, 吴恒, 张瑞忠. 基于一类对余类法的遗传算法优化决策树漏钢预报模型研究[J]. 特殊钢, 2024, 45(2): 112-117.
[3]	黄高见, 韦泽洪, 宋欢, 战东平, 耿彬, 杨永坤. 经济性Q355钢转炉冶炼实践[J]. 特殊钢, 2024, 45(1): 70-76.
[4]	秦凤婷, 刘宗辉. 110 t转炉氧化钼直接还原合金化冶炼B7和42CrMoA钢的工业试验[J]. 特殊钢, 2019, 40(2): 9-12.
[5]	张彦恒, 周海龙, 喻林, 卓钧. 钒钛铁水冶炼提升废钢比的探索与实践[J]. 特殊钢, 2018, 39(5): 21-23.
[6]	秦登平, 杨建平, 危尚好, 张建师, 孙剑光, 刘金旭. 100 t 顶吹氧气转炉石灰石造渣炼钢技术的分析和工艺实践[J]. 特殊钢, 2014, 35(5): 34-36.
[7]	秦登平, 杨建平, 危尚好, 吕延春, 李永生. 烟气分析在100 t转炉深脱磷工艺的应用[J]. 特殊钢, 2013, 34(3): 39-41.
[8]	姜静, 孟利东, 李素玲, 姜琳. 基于混合编码策略的电弧炉冶炼钢种的碳含量预报模型[J]. 特殊钢, 2010, 31(6): 13-15.
[9]	姜静, 李华德, 孙铁, 姜琳. 基于混合遗传算法的电弧炉终点目标温度预报模型[J]. 特殊钢, 2007, 28(5): 22-24.
[10]	王广连, 申景霞, 王学利, 孙永喜, 李猛, 翟正龙. 50 t EAF-LF冶炼终点(TPC)和窄成分(NCC)控制技术的应用[J]. 特殊钢, 2007, 28(3): 59-61.
[11]	王勇杨宁川王承宽. 我国转炉炼钢的现状和发展[J]. 特殊钢, 2005, 26(4): 1-5.