6.5%Si硅钢片制备技术的进展

特殊钢 ›› 2008, Vol. 29 ›› Issue (6): 23-25.

6.5%Si硅钢片制备技术的进展

李慧，李运刚，梁精龙

河北理工大学冶金与能源学院，唐山063009

收稿日期:2008-05-23 出版日期:2008-12-01 发布日期:2022-12-06
通讯作者: 李运刚
作者简介:李慧(1981-),女，硕士生，冶金物理化学研究。
基金资助:
国家自然科学基金资助项目(50674039)

Progress in Preparation Technique of 6.5%Si Silicon-Steel Sheet

Li Hui,Li Yungang ， Liang Jinglong

College of Metallurgy and Energy,Hebei Polytechnic University,Tangshan 063009

Received:2008-05-23 Published:2008-12-01 Online:2022-12-06

摘要/Abstract

摘要： 6.5%Si硅钢片具有良好的电磁性能,是实现电磁设备高效化、节能化、轻便化的理想材料。介绍了6.5%Si硅钢的研究历史,评述了冷轧轧制、快速凝固、薄膜生产工艺、CVD法、粉末轧制法、PCVD法和熔盐电沉积法等制备工艺,以及目前所做的研究工作,指出当前最重要的是研究开发经济高效的制备工艺。

关键词: 6.5%Si, 硅钢片, 制备工艺

Abstract: The 6.5% Si silicon-steel sheet has excellent electromagnetic properties.It is an idea material for electro- magnetic device to realize high efficiency,save energy and portability. The history of investigation on 6.5% Si sheet is presented and the preparation technique such as cold rolling,quenching solidifying of molten steel,thin film process,CVD process,powder-sintering rolling process,PCVD process and electrodeposition of molten salt electralytes is reviewed. It is pointed in this paper that at present the key research is to develop economic and high efficiency preparation technique.

李慧, 李运刚, 梁精龙. 6.5%Si硅钢片制备技术的进展[J]. 特殊钢, 2008, 29(6): 23-25.

Li Hui, Li Yungang , Liang Jinglong. Progress in Preparation Technique of 6.5%Si Silicon-Steel Sheet[J]. Special Steel, 2008, 29(6): 23-25.

参考文献

1 杨劲松，谢建新，周成.6.5%Si高硅钢的制备工艺及发展前景. 功能材料，2003,34(3):244
2 石板哲朗，山部惠造，高橘俊夫.6.5%Si-Fe合金刀冷問压延七磁氨特性.日本金属学会志，1966,30(6):552
3 Narita K.Efect of Nickel and Manganese Addition on Ductility and Magnetic Properties of 6.5% Silicon-iron Alloy. IEEE Tran Mag, 1978,14:258
4 津屋异，荒井贤一.5a-A-3超急冷法仁上)作裂L大高珪素鈇薄带磁性.应用物理学，1979,9(3):142
5 高田芳一办.具有优良的软磁性能的硅钢片的制造方法. 日本公开特许公报，昭62-103321(1987,5)
6 田中靖，铃木治雄.新磁性钢板.金属，1990,60(3):10
7 何忠治.电工钢(上册).北京：冶金工业出版社，1997
8 Honmah,Ushigamiy,Sugay.Magnetic Propertics of(110)[011] Grain Oriented 6.5% Silicon Steel.Joumal of Applied Physics, 1991,70(10):6259
9 Abe M,Takada Y,Murakami T,et al.Magnetic Properties of Commer- cial Produced Fe-6.5wt%Si Sheet. J Mater Eng,1989,11(1):109
10 Tanaka Y,Takada Y,Abe M,et al. Magnetic Propreties of 6.5% Si- Fe Sheet and its Applications.J Magn Magn Mater,1990,83(1-3):375
11 Fish G E,ChangCF,Bye R.Frequency Dependence of Core Loss in Papidly Quenched Fe-6.5wt%Si.JAppl Phys,1988,64(10);5370
12 Ichinokura O,Watanabe T,Murakami K,et al. Two C-Core Type Orthogonal-Core Using a Fe-6.5wt% Si Sheet and its Application to Power Converters.J Appl Phys,1988,64(10):5693
13 Ruiz D,Ros-Yafiez'T,Vandenberghe R E,et al. Magnetic Properties of High Si Steel With Variable Ordering Obtained Through Thermo- mechanical Processing.J Appl Phys,2003,93(10):7112
14 刘艳，梁永锋，叶丰，等.冷轧0.02C-6.56Si高硅钢薄板的力学和磁性能.特殊钢，2007,28(3):28
15 Duwez P,Willens R H,Klement W.The Study on Down Quenching Solidifying of Molten Metal.J Appl Phys,1960(31):1136
16 Grant P S.Spray Forming.Progress in Materials Science,1995,39 (1):497
17 张文，龚克诚.锂离子电磁用碳负极材料.电池，1997,27 (3):132
18 XueJS,DanuJR.Dramatic Effect of Oxidation on Lithium Insertion in Carbons Made From Epoxy Resins.J Electerochem Soc,1995, 142:3668
19 高田芳一.高机能磁性薄钢板(6.5% Si素钢板),NKK技报， 1989(125):58
20 钟太彬，林均品，陈国良.FeySi基合金的制备及应用研究进展. 功能材料，1999,30(4):337
21 游涛，黄璞，冯大军，等.扩散工艺对6.5%wtSi高硅钢性能的影响.武汉工程职业技术学院学报，2005,17(3):1
22 Wang W F.Rolling Compaction,Magmetic Properties and Microstructural Development during Sintering of Fe-Si.Powder Metallury; 1995,38(4):289
23 员文杰，沈强，张联盟.粉末轧制法制备Fe-Si6.5%Si硅钢片的研究.粉末冶金技术，2007,25(1):32
24 Shen Q,Zhou Y,Li J C,et al. Sintering Behavior of Fe-Si Composite Powder by DPR'Technique.Key Engineering Materals,2007,336 (338):2344
25 吴润，陈大凯.PCVD硅涂层对DW型电工钢磁性能的影响. 金属热处理，1996(9):15
26 王蕾，周树清，陈大凯.PCVD法渗Si的研究.武汉科技大学学报(自然科学版),2000,23(3):245
27 Oki T.Electrodeposition of Compound3 Coatings on Molten Salt Electrolytes.J Surace Finishing Soc,1988,39(6);260
28 李青.熔融盐电沉积金属及合金.电镀与精饰，1998,20 (2):26
29 梁精龙.熔盐法沉积Si及制备Fe-6.5wt%Si薄板研究：[硕士学位论文].唐山：河北理工大学，2005

[1]	刘雨, 王长军, 王春旭, 刘振宝, 褚韦涵, 梁剑雄. 增材制造高强度钢的研究与应用进展[J]. 特殊钢, 2023, 44(5): 22-32.
[2]	陈锦旗, 程朝阳, 冯大军, 王小小, 石祥聚, 彭志贤. 包套轧制法制备6.5%Si高硅钢及其性能特点[J]. 特殊钢, 2023, 44(4): 114-119.
[3]	潘丽萍, 贺铸, 李宝宽, 李光强. 6.5%Si钢双辗薄带连铸布流水口结构优化的三维数值模拟[J]. 特殊钢, 2015, 36(4): 13-17.
[4]	傅志强, 郭俊诚, 赵江勇, 贺翠翠. 冷轧硅钢片磁性能测量因素的分析[J]. 特殊钢, 2011, 32(1): 64-66.
[5]	傅志强, 姚久红, 朱锦波. 冷轧无取向硅钢片反复弯曲试验的影响因素[J]. 特殊钢, 2008, 29(3): 69-70.