高温扩散-超细化H13模具钢的组织和性能

特殊钢 ›› 2008, Vol. 29 ›› Issue (3): 63-65.

高温扩散-超细化H13模具钢的组织和性能

李凤艳^1,2, 马党参², 陈再枝², 刘建华² , 雍岐龙^1,2 , 康卓 ^{1, 2}

1昆明理工大学材料与冶金工程学院，昆明650093;
2钢铁研究总院结构材料研究所，北京100081

收稿日期:2007-11-01 出版日期:2008-06-01 发布日期:2022-12-22
作者简介:李凤艳(1980-),女，硕士，主要从事模具钢方面的研究。

Structure and Properties of High Temperature Diffused- Superfining Treated Die Steel H13

Li Fengyan^1,2, Ma Dangshen², Chen Zaizhi², Liu Jianhua², Youg Qilong^1,2, Kang Zhuo^1,2

1 Institute of Materials and Metallurgy Engineering,Kunming University of Science and Technology,Kunming 650093;
2 Institute for Structural Materials,Central Iron and Steel Research Institute,Beijing 100081

Received:2007-11-01 Published:2008-06-01 Online:2022-12-22

摘要/Abstract

摘要： 测试和分析结果表明:非高温扩散-超细化的H13(4Cr5MoSiV1)钢材存在大块状的共晶碳化物,带状偏析严重,钢的横向冲击韧性较差;而经过合理的高温扩散和超细化处理的H13钢材,共晶碳化物基本消失,带状偏析和组织均匀性明显改善,显著提高钢的横向冲击韧性。

关键词: 热作模具钢, , 超细化组织, , 碳化物, 性能

Abstract: Results of examination and analysis indicated that in normal non high temperature diffused-superfining trea- ted H13(4Cr5MoSiV1)steel products there were massive eutectic carbides with serious banding segregation and transverse impact toughness of steel was lower; and in available high temperature difused and superfning treated H13 steel products, the eutectic carbides were basically dismissed,the banding segregation and structure homogeneity improved obviously and the transverse impact toughness of steel increased appreciably.

Key words: Hot Working Die steel, Superfining Structure, Carbide, Properties

李凤艳, 马党参, 陈再枝, 刘建华, 雍岐龙, 康卓 . 高温扩散-超细化H13模具钢的组织和性能[J]. 特殊钢, 2008, 29(3): 63-65.

Li Fengyan, Ma Dangshen, Chen Zaizhi, Liu Jianhua, Youg Qilong, Kang Zhuo. Structure and Properties of High Temperature Diffused- Superfining Treated Die Steel H13[J]. Special Steel, 2008, 29(3): 63-65.