Ti-V-Nb微合金管线钢焊缝及热影响区中第二相粒子

特殊钢 ›› 2007, Vol. 28 ›› Issue (6): 13-15.

Ti-V-Nb微合金管线钢焊缝及热影响区中第二相粒子

耿相军¹，陈茂爱²

1山东交通学院，济南250023;
2山东大学材料液态结构及其遗传性教育部重点试验室，济南250014

收稿日期:2007-05-11 出版日期:2007-12-01 发布日期:2022-12-27
作者简介:耿相军(1964-),女，讲师，1987年山东工业大学毕业，金属材料与热处理研究。
基金资助:
山东省科学技术发展计划资助项目(2006GG3204017)

Second Phase Particles in CGHAZ and Weld of Ti-V-Nb Microalloyed Pipeline Steel

Geng Xiangjun¹， Chen Maoai²

1 Shandong Jiaotong University,Jinan 250023;
2 Key Laboratory of Liquid Structure and Heredity of Materials,Ministry of Education,Shandong University,Jinan 250014

Received:2007-05-11 Published:2007-12-01 Online:2022-12-27

摘要/Abstract

摘要： 利用萃取复型技术研究了Ti-V-Nb微合金钢(%:0.08C、1.29Mn、0.02Ti、0.04V、0.04Nb)模拟粗晶热影响区及焊缝(H08C焊丝%:0.06C、1.44Mn、0.24Mo、0.04Ti、0.01V)第二相粒子。结果表明,母材大部分第二相粒子≤30nm,平均尺寸19.70nm;焊接粗晶区仍残留较多的碳氮化合物粒子,粒子平均尺寸增大至42.78nm,粒子由母材中不规则形状变为方形,粒子Ti含量显著提高。焊缝中绝大部分碳氮化合物粒子发生溶解,熔池中生成的TiO与熔池中其他脱氧和脱硫产物结合成尺寸较大的夹杂物,在焊缝中未发现含Nb、V的夹杂物和第二相粒子。

关键词: Ti-V-Nb微合金钢, 第二相粒子, 焊缝, 粗晶热影响区

Abstract: The second phase particles in simulated weld(H08C weld wire-0.06C,1.44Mn,0.24Mo,0.04Ti, 0.01V)and coarse grained heat affected zone(CGHAZ)of Ti-V-Nb microalloyed steel(0.08C,1.29Mn,0.02Ti, 0.04V,0.04Nb)have been studied by using carbon extraction replica technique.Results showed that size of most second phase particles in parent metal was ≤30 nm with average size 19.70 nm; there was a lot of residual carbo-nitride particles in CGHAZ of which the average size increased to42.78 nm,and the shape of residual particles changed from irregular morphology in parent metal to cubic in CGHAZ in which the Ti content obviously increased; and most of carbo-nitride particles in weld dissolved,the TiO formed in bath combined with other deoxidising and desulphurizing products to form large scale inclusions and the inclusions and second particles containing Nb,V didn't find out in weld.

Key words: Ti-V-Nb Microalloying Steel,Second Phase Particles,Weld,CCHAZ

耿相军, 陈茂爱. Ti-V-Nb微合金管线钢焊缝及热影响区中第二相粒子[J]. 特殊钢, 2007, 28(6): 13-15.

Geng Xiangjun, Chen Maoai. Second Phase Particles in CGHAZ and Weld of Ti-V-Nb Microalloyed Pipeline Steel[J]. Special Steel, 2007, 28(6): 13-15.

[1]	陈玉凤, 张俊粉, 薛启河, 白君, 杨树峰, 李京社. 氮含量与终轧温度对钛微合金化高强钢 CGLC700低温冲击韧性的影响[J]. 特殊钢, 2024, 45(3): 40-18.
[2]	厚健龙, 于永业, 向华, 李堃. 低碳冷轧搪瓷钢DC01EK研发及抗鳞爆性能研究[J]. 特殊钢, 2023, 44(1): 61-64.
[3]	孙乐飞, 帅勇, 郭文波, 林挺, 操瑞宏, 万勇, 温永红. C36船板钢铸坯角部横裂和高温热塑性分析及改进工艺[J]. 特殊钢, 2022, 43(3): 64-68.
[4]	季峰, 李仲昱, 王晓国, 戴益波, 张艳, 郭宇航. 回火温度对22MnCrNiMo系泊链钢焊缝组织与性能的影响[J]. 特殊钢, 2022, 43(2): 69-74.
[5]	李仲昱, 王晓国, 戴益波, 张艳, 郭宇航. 调质处理对22MnCrNiMo钢闪光焊焊缝组织与力学性能的影响[J]. 特殊钢, 2021, 42(3): 71-75.
[6]	刘夙伟, 王晓国, 郭宇航 . 热处理工艺对22MnCrNiMo钢闪光焊缝耐蚀性能的影响[J]. 特殊钢, 2021, 42(1): 81-85.
[7]	朱诚意, 郑建新, 李光强, 陈先红, 张峰. 酸溶铝对铸态取向硅钢中第二相粒子组成和形貌的影响[J]. 特殊钢, 2014, 35(2): 60-64.
[8]	冯岩青, 王福明. 冷轧变形量对Nb-Ti微合金化IF钢组织和性能的影响[J]. 特殊钢, 2012, 33(1): 65-68.