轧制条件对冷轧无取向硅钢织构的影响

特殊钢 ›› 2005, Vol. 26 ›› Issue (2): 25-27.

轧制条件对冷轧无取向硅钢织构的影响

金自力，徐向棋

内蒙古科技大学材料与冶金工程学院，包头 014010

收稿日期:2004-09-08 出版日期:2005-04-01 发布日期:2023-05-26
作者简介:金自力，男，41岁，硕士，教授，1991年毕业于北京科技大学。从事材料成型过程中组织与性能控制的数值模拟研究。
基金资助:
内蒙古自然科学基金资助项目(200308020202)

Effect of Rolling Process on Texture Evolution of Cold Rolled Non-Oriented Silicon Steel

Jin Zili , Xu Xiangqi

Materials and Metallurgy Engineering College,Inner Mongolia University of Science and Technology,Baotou 014010

Received:2004-09-08 Published:2005-04-01 Online:2023-05-26

摘要/Abstract

摘要： 除钢质的纯净度、夹杂物聚集程度、再结晶组织外 ,织构分布和各组分强度对冷轧无取向硅钢的磁性能磁感应强度和铁损亦具有显著的影响。从基础理论方面讨论了冷轧无取向硅钢的热轧、终轧温度和层流冷却条件对轧件织构形成的影响及冷轧压下率和冷轧轧制形状参数对其再结晶织构的影响.

关键词: 冷轧硅钢, 无取向, 轧制工艺, 织构

Abstract: Besides cleanliness,degree of inclusion accumulation and recrystallization structure of steel,the texture distribution and intensity of each component have obvious influence on magnetic performance - magnetic induction strength and iron loss of cold rolled non-oriented silicon steel.The effect of hot rolling finishing temperature and lamninar flow cooling condition of cold rolled non-oriented silicon steel on texture formation of rolling piece and the effect of cold rolling reduction and cold rolling shape parameters on recrystallization texture of steel are discussed in foundation theories.

Key words: Cold Rolled Silicon Steel, Non-Orientation, Rolling Process, Texture

金自力, 徐向棋. 轧制条件对冷轧无取向硅钢织构的影响[J]. 特殊钢, 2005, 26(2): 25-27.

Jin Zili , Xu Xiangqi. Effect of Rolling Process on Texture Evolution of Cold Rolled Non-Oriented Silicon Steel[J]. Special Steel, 2005, 26(2): 25-27.

参考文献

[1] Arott A S.The Past,the Present and Future of Soft Magnetic Materials,J.Magnetism and Magnetic Materials,2000,215-216:6
[2] Raabe D.Rolling and Annealing Textres of BCC Metals,ICOTOM 10,Japan,1994:597
[3] Tonida T.A New Process to Develop(100)Texture in Silicon Steel Sheets, Journnal of Materials Engineering and Performance,1996,5(1):316
[4] 毛卫民，张新明.晶体材料织构定量分析.北京：冶金工业出版社，1995
[5] 何忠治. 电工钢的最近发展.金属功能材料，1997,4(6):
[6] Bunge H J.Ceneral Outline and Series Expansion Method.Quantitative Texture Analysis.DGM-Informationsgesellschaft. 1981,1
[7] 高振远，王道远，郭晓宏.冷轧电工钢织构演变与磁性能的关系.鞍钢技术，2003(2):14
[8] 柳璞如，李福林.无取向硅钢织构的研究.钢铁研究论文选集. 北京：科学技术出版社，1994.12
[9] 何忠治.电工钢.北京：冶金工业出版社，1997
[10] Boc I,Cziraki A,Grof T,et al. Analysis of Inclusion in Cold-Rolled N.O.Si-Fe Strips. Journal of Magnetism and Magnetic Materials,
1990(83):381
[11] 韦峻.热轧工艺对冷轧无取向电工钢组织结构和性能的影响.北京：清华大学出版社，1999
[12] 储双杰.生产工艺参数对无取向电工钢磁性的影响.特殊钢， 2003,24(2):37
[13] Tomida T,Tanakal T.Development of(100)Texture in Silicon Steel Sheets by Removal of Manganese and Decarburzation . ISIJ International,1995,35(5):548
[14] Lyudkovsky G,Shapiro JM.Effectof Aluminum Content and Processing in Texture and Permeability of Lamination Steels. Journal of Applied Physics,1985,57(1):4235
[15] Kawamata R(日)等.冷轧参数对无取向电工钢再结晶织构的影响.世界钢铁，1999(4):18
[16] Minoru Takashima,Michiro Konatsubara.{001}Texhre Development by Two-Stage.Cold.Rolling. Method. in.Non-oriented. Electrical.Steel . ISIJ International. 1997,37(12):1263