ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2021, Vol. 42 ›› Issue (6): 47-49.

所属专题: 铁素体不锈钢

• 工艺技术 • 上一篇    下一篇

软磁铁素体不锈钢JB-J6线材的研制与应用

陈超1,2,张增武2   

  1. 1 太原钢铁(集团)有限公司 先进不锈钢材料国家重点实验室,太原030003;
    2 山西太钢不锈钢股份有限公司,太原030003
  • 收稿日期:2021-03-20 出版日期:2021-12-23 发布日期:2022-01-03
  • 作者简介:陈 超(1986-),男,工程师,2009年中北大学(本科)毕业,不锈钢线材研发及质量分析。

Development and Application of Soft Magnetic Ferritic  Stainless Steel JB-J6 Wire Rod

Chen Chao1,2 , Zhang Zengwu2   

  1. 1 State Key Laboratory of Advanced Stainless Steel Materials, Taiyuan Iron & Steel(Group)Co Ltd, Taiyuan 030003; 
    2 Shanxi Taiyuan Stainless Steel Co Ltd, Taiyuan 030003
  • Received:2021-03-20 Published:2021-12-23 Online:2022-01-03

摘要: 设计了JB-J6钢目标化学成分(/%:0.01C,2.1Si,0.25Mn,0.018P,0.025S,16Cr),通过VOD工艺、LF精炼(渣中二元碱度控制在0.9~1.1)、保护浇注工艺(过热度30~50 ℃,拉速0.9~1.2 m/min,二冷比水量0.85~0.95 L/kg)和轧制温度1100~1180 ℃,成功生产太钢软磁铁素体不锈钢JB-J6 Φ8 mm线材,各项性能满足用户要求。

Abstract: The aim chemical  composition   of  JB-J6   steel(/%:0.01C,2. 1Si,0.25Mn,0.018P,0.025S,16Cr) is   designed, and by VOD refining technology, LF refining process ( binary basicity slag control in0.9~1. 1), protecting pouring process (superheat  degree  30~50  ℃,casting  speed 0.9  to1.2  m/min, secondary  cooling  water  rate  0.85  to0.95  L/kg)  and rolling temperature1100~1180 ℃,the Tisco soft magnetic ferrite stainless steel JB-J6 wire has been successfully produced, each property meets the requirement of user.