ISSN:1003-8620

CN:42-1243/TF

主管:中信泰富特钢集团股份有限公司

主办:大冶特殊钢有限公司

特殊钢 ›› 2021, Vol. 42 ›› Issue (6): 50-54.

• 工艺技术 • 上一篇    下一篇

复杂环境高强度耐蚀耐磨钢HNM450的开发及应用

陈振业1,2,齐建军1,龙杰3,陈子刚4,杨浩1,吕建会3   

  1. 1河钢集团钢研总院,石家庄050000;
    2东北大学轧制技术及连轧自动化国家重点实验室,沈阳110819;
    3河钢集团舞阳钢铁有限责任公司,平顶山462500;
    4河钢集团邯郸钢铁集团有限公司,邯郸 056000
  • 收稿日期:2021-03-25 出版日期:2021-12-23 发布日期:2022-01-03
  • 作者简介:陈振业(1983-),男,博士生(东北大学),高级工程师,2006年武汉科技大学(本科)毕业,中厚板开发和工艺研究。
  • 基金资助:
    河北省“三三三人才”培养资助项目(A201803007)

Development and Application of High Strength Corrosion Resistant and Wear Resistant Steel HNM450 in Complex Environment

Chen Zhenye1,2, Qi Jianjun1, Long Jie1, Chen Zigang1, Yang Hao1 ,  Lü Jianhui3   

  1. 1 Technical Department,Technology Research Institute of HBIS,Shijiazhuang 050000;
    2 The state key laboratory of rolling automation,Northeastern University,Shenyang 110819;
    3 Hebei Iron and Steel Group,Wuyang Iron and Steel Co Ltd,Pingdingshan 462500;
    4 Hebei Iron and Steel Group,Handan Iron and Steel Co Ltd,Handan 056000
  • Received:2021-03-25 Published:2021-12-23 Online:2022-01-03

摘要: 研发了满足磨煤机复杂服役工况的高强度耐磨钢HNM450。其抗拉强度1727 MPa,断后伸长率14.5%,平均HBW硬度值522,-20 ℃冲击功38 J,具有良好的强度、塑性和低温韧性。模拟磨煤机实际服役工况的腐蚀磨损对比试验结果显示:HNM450产品200 ℃高温pH=5的弱酸性潮湿环境和200 ℃高温,pH=9的弱碱性潮湿环境下的耐腐蚀耐磨性能均明显优于HARDOX450钢。HNM450钢已经用于下游用户磨煤机的制造,实现了对进口耐磨钢HARDOX450的国产化替代。

Abstract: The high-strength wear-resisting steel HNM450 to meet the complex working conditions of the coal mill has been  developed.  Its  tensile  strength  is  1727  MPa,elongation  after  fracture  is  14.5%,average  HBW  hardness  number  is 522,and  impact  energy  at  -20℃  is  38J,it  has  good  strength,plasticity  and  low  temperature  toughness.The  comparative test results of corrosion and wear simulating the actual working condition of the coal mill show that the corrosion and wear resistance  of HNM450 products  at 200  ℃ high temperature,pH=5  in the weak  acidic humid  environment  and  at 200  ℃  high  temperature,pH=9  in  the  weak  alkaline  humid  environment  is  obviously  better  than  that  of  HARDOX450  steel.  HNM450  steel has been used in the manufacture of coal mills for downstream users,realized the domestic  substitution of imported HARDOX450 steel.