Influence Factors on Magnetic Induction of Traveling Wave Electromagnetic Stirrer for Slab Concasting
|更新时间:2026-01-21
|
Influence Factors on Magnetic Induction of Traveling Wave Electromagnetic Stirrer for Slab Concasting
Special SteelVol. 27, Issue 3, Pages: 20-22(2006)
作者机构:
1. 内蒙古科技大学材料与冶金学院,包头,014010
2. 东北大学轧制技术与连轧自动化国家重点实验室,沈阳,110004
作者简介:
基金信息:
DOI:
CLC:
Received:20 December 2005,
Online First:10 March 2023,
Published:10 March 2006
稿件说明:
移动端阅览
邢淑清, 麻永林, 宿国栋, et al. Influence Factors on Magnetic Induction of Traveling Wave Electromagnetic Stirrer for Slab Concasting[J]. Special Steel, 2006, 27(3): 20-22.
DOI:
邢淑清, 麻永林, 宿国栋, et al. Influence Factors on Magnetic Induction of Traveling Wave Electromagnetic Stirrer for Slab Concasting[J]. Special Steel, 2006, 27(3): 20-22.DOI:
Influence Factors on Magnetic Induction of Traveling Wave Electromagnetic Stirrer for Slab Concasting
The evolution law of magnetic induction of traveling wave stirer developed for the concasting slab was determined by using 3- dimensional Gauss meter in laboratory. The test results showed that the magnetic induction of developed two-side stirrer linearly increased with increasing input current at given input frequency and distance between relative magnetie pale pairs
and as the input curent was ~600 A
the magnetic induction at center of stirer was up to 600×10
-4
T. The measured results using single side secondary cooling magnetic stiring in situ of(180~220)mmx(900~1630)mm slab concaster obtained that as input curent only is 445~595 A developed two side stirer the magnetic induction at center magnetic field shall be up to(450~600)×10