A Study on Physical Properties of Free Fluoride Mould Powder Containing B₂O₃

李桂荣; 王宏明; 李敬生; 袁国银

您当前的位置：

首页 >

文章列表页 >

A Study on Physical Properties of Free Fluoride Mould Powder Containing B₂O₃

更新时间：2026-01-21

- A Study on Physical Properties of Free Fluoride Mould Powder Containing B₂O₃
- Special Steel Vol. 26, Issue 3, Pages: 12-14(2005)
- 作者机构：
  
  江苏大学材料学院,镇江,212013
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：26 November 2004，
  
  Online First：11 May 2023，
  
  Published：11 May 2005
- 稿件说明：
移动端阅览
李桂荣, 王宏明, 李敬生, et al. A Study on Physical Properties of Free Fluoride Mould Powder Containing B₂O₃[J]. Special Steel, 2005, 26(3): 12-14.
DOI：

李桂荣, 王宏明, 李敬生, et al. A Study on Physical Properties of Free Fluoride Mould Powder Containing B₂O₃[J]. Special Steel, 2005, 26(3): 12-14. DOI：

摘要

常规保护渣中配入的助熔剂一般是氟化物和Na₂O

但二者都对环境产生严重污染。为此试验研究了含助熔剂 B2O3 保护渣及其熔点、粘度、结晶性能和表面张力等物理性能。试验表明，当保护渣碱度 (CaO/SiO₂)等于0.88

成分(%)为37.91CaO-43.09SiO2-5Al₂O₃-5MgO-2Li₂O-7B₂O₃ 时的熔点909℃

熔化性温度 1160℃

1300℃粘度值0.40 Pa ·s

1300 ℃表面张力值0.32N/m

能满足常规钢种和部分特殊钢种对连铸保护渣的使用要求。

Abstract

The flux agents in common mould powder normally are fluoride and sodium oxide

both all produce environmental pollution. Therefore the physical properties such as melting point

viscosity

crystallizing properties and surface ten- sional force of mould powder containing flux agent B₂Os were studied. The test results showed that for the mould powder with CaO/SiO₂= 0.88 and ingredient being 37.91%CaO-43.09%SiO₂-5%A₂O₃-5%MgO-2%Li₂O-7%B₂O₃

the melting point was 909℃

the flexible melting temperature was 1160 ℃

viscosity value at 1300 ℃ was 0.4 Pa's and surface tensional force was 0.32 N/m which could meet the service requirements of concasting mould powder for normal steel grades and some special steel grades.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰