Effect of Carbon Content on Structure and Properties of Cr17Mo Type Corrosion Resistant Stainless Steel for Plastic Mould

刘建华; 赵亮; 马党参; 陈再枝; 康爱军

您当前的位置：

首页 >

文章列表页 >

Effect of Carbon Content on Structure and Properties of Cr17Mo Type Corrosion Resistant Stainless Steel for Plastic Mould

更新时间：2026-01-21

- Effect of Carbon Content on Structure and Properties of Cr17Mo Type Corrosion Resistant Stainless Steel for Plastic Mould
- Special Steel Vol. 27, Issue 4, Pages: 22-24(2006)
- 作者机构：
  
  1. 钢铁研究总院结构材料研究所,北京,100081
  2. 昆明理工大学,昆明,650093
  3. 东北特钢集团抚顺特钢公司,抚顺,113001
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：16 January 2006，
  
  Online First：17 March 2023，
  
  Published：17 March 2006
- 稿件说明：
移动端阅览
刘建华, 赵亮, 马党参, et al. Effect of Carbon Content on Structure and Properties of Cr17Mo Type Corrosion Resistant Stainless Steel for Plastic Mould[J]. Special Steel, 2006, 27(4): 22-24.
DOI：

刘建华, 赵亮, 马党参, et al. Effect of Carbon Content on Structure and Properties of Cr17Mo Type Corrosion Resistant Stainless Steel for Plastic Mould[J]. Special Steel, 2006, 27(4): 22-24. DOI：

摘要

试验研究了成分(％)为:0．39C

0．70Ni

16．73Cr

1．07Mo和0．53C

1．05Ni

16．87Cr

0．96Mo两种Cr17Mo型耐蚀塑料模具钢的淬回火组织、力学性能和耐蚀性能。试验结果表明

当Cr17Mo型钢中碳含量由0．39％提高至0．53％时

经1 060℃淬火

475℃回火后该钢的峰值硬度HRC值由46．5提高到53．4;两种试验钢在弱酸、氧化性酸和1％盐酸中均有较高的耐腐蚀性能。

Abstract

The quenched and tempered structure

mechanical properties and corrosion resistance of two Cr17Mo type corrosion resistant stainless steels for plastic mould-0.39C

0.70Ni

16.73Cr

1.07Mo and 0.53C

1.05Ni

16.87Cr

0.96Mo have been tested and researched. As the carbon content in Cr17Mo type steel increased from 0.39% to 0.53%

the peak HRC hardness value of steel quenched at 1060 ℃ and tempered at 475 ℃ increased from 46.5 to 53.4;and the two test steels had better corrosion resistance in weak acid

oxidizing acid and 1% HCl.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰