Effect of Ca-Treatment on Sulphide Inclusions in 0.048%~0.065%S Medium-Carbon Structure Steel
|更新时间:2026-01-21
|
Effect of Ca-Treatment on Sulphide Inclusions in 0.048%~0.065%S Medium-Carbon Structure Steel
Special SteelVol. 27, Issue 3, Pages: 23-25(2006)
作者机构:
1. 北京科技大学冶金与生态工程学院,北京,100083
2. 兴澄特种钢铁有限公司,江阴,214429
作者简介:
基金信息:
DOI:
CLC:
Received:26 December 2005,
Online First:10 March 2023,
Published:10 March 2006
稿件说明:
移动端阅览
李国忠, 简龙, 陈伟庆, et al. Effect of Ca-Treatment on Sulphide Inclusions in 0.048%~0.065%S Medium-Carbon Structure Steel[J]. Special Steel, 2006, 27(3): 23-25.
DOI:
李国忠, 简龙, 陈伟庆, et al. Effect of Ca-Treatment on Sulphide Inclusions in 0.048%~0.065%S Medium-Carbon Structure Steel[J]. Special Steel, 2006, 27(3): 23-25.DOI:
Effect of Ca-Treatment on Sulphide Inclusions in 0.048%~0.065%S Medium-Carbon Structure Steel
The effect of Ca-Si and FeS adding order in Ca-treatment process and Ca/S ratio for steel on morphology and quality of sulphide in 0.048%~0.065% S medium-carbon steel(0.46~0.57C
0.83~0.94Mn
0.21~0.24Cr
0.03~0.04Mo)has been studied by a carbon tube fumnace in laboratory.the results showed that the length and quantity of sulphide in steel by treatment first adding FeS then adding Ca-Si were obviously lower than that first adding Ca-Si then adding FeS;and with increasing Ca/S ratio in steel
the quantity of spherical multi-phase inclusions increased while the quantity of strip-shapc MnS decreased
of which the size increased. The available Ca/S ratio for steel by compound treatment using Ca-Si is ~0.03.