Control of Nitrogen Content in Bearing Steel Steelmaking by a 50  t  EAF-LF(VD)-CC  Flowsheet

胡蒙均; 李法兴; 赵俊学; 王梁; 孙永喜

您当前的位置：

首页 >

文章列表页 >

Control of Nitrogen Content in Bearing Steel Steelmaking by a 50 t EAF-LF(VD)-CC Flowsheet

更新时间：2026-01-21

- Control of Nitrogen Content in Bearing Steel Steelmaking by a 50 t EAF-LF(VD)-CC Flowsheet
- Special Steel Vol. 27, Issue 4, Pages: 53-54(2006)
- 作者机构：
  
  1. 西安建筑科技大学,西安,710055
  2. 莱芜钢铁股份有限公司,莱芜,271105
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：08 February 2006，
  
  Online First：18 March 2023，
  
  Published：18 March 2006
- 稿件说明：
移动端阅览
胡蒙均, 李法兴, 赵俊学, et al. Control of Nitrogen Content in Bearing Steel Steelmaking by a 50 t EAF-LF(VD)-CC Flowsheet[J]. Special Steel, 2006, 27(4): 53-54.
DOI：

胡蒙均, 李法兴, 赵俊学, et al. Control of Nitrogen Content in Bearing Steel Steelmaking by a 50 t EAF-LF(VD)-CC Flowsheet[J]. Special Steel, 2006, 27(4): 53-54. DOI：

摘要

分析莱钢50 t EAF-LF(VD)-CC冶炼工艺各期GCr15轴承钢中氮含量的变化

得出电弧炉终点[N

]

为(23～36)×10

-6

成品材N含量为(79-104) ×10

-6

。为降低轴承钢中的N含量

采取电弧炉兑入铁水量≥35％、用低氮增碳剂、优化LF精炼操作、VD真空度≤67 Pa、长水口和氩气保护浇铸等措施

使GCr15轴承钢材的平均氮含量从91．6×10

-6

降至54．8×10

-6

。

Abstract

The nitrogen content in GCr15 bearing steel at each melting phase in 50 t EAF-LF(VD)-CC process was analyzed to obtain that the EAF end [N] was(23~36)×10-⁶ and the N content in products was (79~104)×10-⁶.In order to decrease the N content in bearing steel

with charging ≥35% hot metal in EAF

using low nitrogen carbonizing agent

optimizing LF refining operation

VD vacuum ≤67 Pa

long nozzle and argon shielding casting

the average nitrogen content in GCr15 bearing steel products decreased to 54.8×10-⁶ from original 91.6×10-6.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 100 t Converter- LF (VD) Process

Control of Oxygen Content in Bearing Steel GCrl5 Steelmaking by 120 t BOF-LF-VD-CC Process

Control of Acid Soluble Aluminium Content in Molten Steel at End of 150 t RH Refining

Control of Carbon Macro-Segregation in <>600 mm Casting Round Bloom of Low Carbon Steel Q345E

Process Practice on Control of Nitrogen Content in High Carbon Steel SWRH82B Produced by 130 t BOF-LF-150 mm x 150 mm CC Billet Flow Sheet

Related Author

吴伟

刘浏

赵继宇

吴建鹏

李小明

王建国

刘跃

陈爱梅

Related Institution

包钢钢联股份有限公司技术中心

河北钢铁技术研究总院

河北钢铁集团唐钢第一钢轧厂

河北工业职业技术学院材料工程系

钢铁研究总院连铸技术国家工程研究中心

⁰