Effect of Normalizing Temperature on Structure and Magnetic Properties of Annealed Non-Oriented Electric Steel
|更新时间:2026-01-21
|
Effect of Normalizing Temperature on Structure and Magnetic Properties of Annealed Non-Oriented Electric Steel
Special SteelVol. 27, Issue 4, Pages: 31-33(2006)
作者机构:
1. 北京科技大学材料科学和工程学院,北京,100083
2. 太原钢铁(集团)有限公司技术中心,太原,030003
作者简介:
基金信息:
DOI:
CLC:
Received:25 February 2006,
Online First:17 March 2023,
Published:17 March 2006
稿件说明:
移动端阅览
毛卫民, 王一德. Effect of Normalizing Temperature on Structure and Magnetic Properties of Annealed Non-Oriented Electric Steel[J]. Special Steel, 2006, 27(4): 31-33.
DOI:
毛卫民, 王一德. Effect of Normalizing Temperature on Structure and Magnetic Properties of Annealed Non-Oriented Electric Steel[J]. Special Steel, 2006, 27(4): 31-33.DOI:
Effect of Normalizing Temperature on Structure and Magnetic Properties of Annealed Non-Oriented Electric Steel
The effect of 2.5 mm hot rolled plate of electric steel(≤0.005%C-2.5%~2.8%Si)normalizing at 850 ~1100℃ on structure and magnetic properties of 0.5 mm cold rolled sheet annealed at 880 ℃+ 950 ℃ has been studied.The results showed that with increasing normalizing temperature of hot rolled plate
the recrystallized grain size of annealed cold rolled sheet increased
iron loss reduced and magnetic induction monotonically increased; as normalizing temperature was more than 1000 ℃
with solid solution second phases then precipitated dispersed in annealed cold rolled sheet
the grain fined and iron loss increased. The optimum normalizing temperature of hot rolled plate is 1000 ℃.