Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t  Converter-60 t  LF

邢梅峦; 李晶

您当前的位置：

首页 >

文章列表页 >

Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t Converter-60 t LF

更新时间：2026-01-21

- Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t Converter-60 t LF
- Special Steel Vol. 27, Issue 3, Pages: 49-50(2006)
- 作者机构：
  
  1. 北京科技大学冶金与生态学院,北京,100083
  2. 石家庄钢铁有限责任公司,石家庄,050031
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：20 December 2005，
  
  Online First：11 March 2023，
  
  Published：11 March 2006
- 稿件说明：
移动端阅览
邢梅峦, 李晶. Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t Converter-60 t LF[J]. Special Steel, 2006, 27(3): 49-50.
DOI：

邢梅峦, 李晶. Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t Converter-60 t LF[J]. Special Steel, 2006, 27(3): 49-50. DOI：

摘要

石钢采用60 t转炉-60 t LF-150 mm×150 mm方坯连铸工艺生产GCr15轴承钢。工艺实践表明

采用高拉碳操作法

转炉平均终点碳含量为0.30%;改进工艺控制转炉出钢下渣量;LF精炼时采用CaO-SiO

-Al

高碱度渣;连铸时钢包到中间包采用套管和吹氩保护

中间包水口使用密封垫

有效地控制了钢中的氧含量。统计表明25炉轴承钢氧含量为(6.5~11.9)×10

-6

平均氧含量为10.2×10

-6

。

Abstract

The bearing steel GCrl5 is produced by 60 t converter -60 t ladle furnace(LF)- 150 mm×150 nm billet concasting process at Shijiazhuang Steel. The process practice showed that the oxygen cortent in steel was effectively controlled by catch carbon practice with average converter end [C] 0.30%

improving process to control slagging amount during corverter tapping

using CaO-SiO₂-Al₂O₃ high basicity slag in LF refining

adopting casing tube and argon blown protection from ladle to tundish and using sealing washer at tundish nozzle.The statistic results showed that the oxygen content in bearing steel

25 heats

was(6.5~11.9)× 10-⁶

the average oxygen content was 10.2×10-⁶.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰