Numerical Simulation of Flow Field in Laval Nozzle of Oxygen Lance

吕国成; 刘坤

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation of Flow Field in Laval Nozzle of Oxygen Lance

更新时间：2026-01-21

- Numerical Simulation of Flow Field in Laval Nozzle of Oxygen Lance
- Special Steel Vol. 30, Issue 3, Pages: 4-6(2009)
- 作者机构：
  
  辽宁科技大学材料学院，鞍山1,H405
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：26 November 2008，
  
  Online First：22 November 2022，
  
  Published：22 November 2009
- 稿件说明：
移动端阅览
吕国成, 刘坤. Numerical Simulation of Flow Field in Laval Nozzle of Oxygen Lance[J]. Special Steel, 2009, 30(3): 4-6.
DOI：

吕国成, 刘坤. Numerical Simulation of Flow Field in Laval Nozzle of Oxygen Lance[J]. Special Steel, 2009, 30(3): 4-6. DOI：

摘要

根据实际生产的氧枪喷头按比例建立了Laval喷管模型。应用商业软件Fluent6.2

采用κ-ε模型

耦合隐式求解器

讨论了喷管内不同数学模型的适应性

得出RNGκ-ε模型模拟喷管内激波较为理想。分析了Laval喷管内不同工况下(P

=0.11～1.0 MPa)的流场、马赫数及压力的分布情况

得出喷管入口处滞止压力影响Laval喷管内部流动状况

但不影响出口流动工况

出口工况主要取决于喷管的几何结构。

Abstract

A model of Laval nozzle has been established by definite proportion according to oxygen nozzle used in actual production. With using commercial software Fluent 6. 2

k-£ model and coupling implicit expression solution

the a- daptability of different math models in nozzle was discussed

it was obtained the RNG k-£ model was better to simulate (he shock wave in nozzle. The distribution of flow field

Mach number and pressure in the Laval nozzle with different operating mode (P

=0. 11 ~ 1. 0 MPa) were analyzed

and obtained that inhibited pressure at inlet of nozzle affected flow condition in Laval nozzle but it didn't affect the flow mode at outlet of nozzle which depended on geometry structure of nozzle.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimization and Simulation of Stirring Process for 100 t Electric Arc Furnace Bath and Its Application

Application and Numerical Simulation of Molten Steel Flow Field in Tundish for Alloy Steel Billet Concasting

Effects of Nozzle Submerged Depth on Flow and Temperature Field of Molten Steel in Mold

Coupled Numerical Simulation of Flow Field and Temperature Field of Mold Concasting at Low Superheat by Two Rollers Cooling

Numerical Simulation of a New Type Submerged Entry Nozzle for 200 mm x 200 mm Billet Continuous Casting

Related Author

Zeng Zhaopeng

Du Xiqian

Wang Yao

Ma Jianchao

王硕明

朱立光

刘志国

梁玫

Related Institution

Institute of Research of Iron and Steel， Shagang，，Zhangjiagang

东北大学材料与冶金学院

河北理工大学冶金能源学院

石家庄钢铁公司技术中心

北京科技大学冶金与生态工程学院

⁰