Optimization of Design on Taper of Mold of Slab Caster for Casting Low Carbon Steels by using Finite Element Method

王卫华; 刘洋; 陈霞

您当前的位置：

首页 >

文章列表页 >

Optimization of Design on Taper of Mold of Slab Caster for Casting Low Carbon Steels by using Finite Element Method

更新时间：2026-01-21

- Optimization of Design on Taper of Mold of Slab Caster for Casting Low Carbon Steels by using Finite Element Method
- Special Steel Vol. 35, Issue 6, Pages: 1-4(2014)
- 作者机构：
  
  首钢技术研究院,北京,100043
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：13 June 2014，
  
  Online First：19 August 2022，
  
  Published：19 August 2014
- 稿件说明：
移动端阅览
王卫华, 刘洋, 陈霞. Optimization of Design on Taper of Mold of Slab Caster for Casting Low Carbon Steels by using Finite Element Method[J]. Special Steel, 2014, 35(6): 1-4.
DOI：

王卫华, 刘洋, 陈霞. Optimization of Design on Taper of Mold of Slab Caster for Casting Low Carbon Steels by using Finite Element Method[J]. Special Steel, 2014, 35(6): 1-4. DOI：

摘要

钢厂1

连铸机以0.95 m/min拉速生产SS400

D36和X70钢150~180 mm连铸板坯时

易产生角部纵裂纹

发生率最高可达5%。利用商业有限元软件ANSYS

建立了板坯连铸结晶器二维切片式凝固传热数学模型

并采用传热和应力/应变直接耦合的方法对连铸过程结晶器内凝固传热进行计算

分析了各钢种在0.95~1.05m/min拉速下铸坯温度分布以及温度分布不均引起的热应力。工业试验结果表明

根据优化计算结果

将板坯结晶器窄面的锥度系数由原来的1.00%改进为1.10%后

有效地消除了1

连铸机板坯的角部纵裂纹。

Abstract

During production of 150 ~ 180 mm casting slab of SS400

D36 and X70 steel with casting speed 0. 95 m/min by 1

caster at steelworks the longitudinal crack at comer of slab easily occurs and the max occurrence rate of crack is up to 5%. The solidification and heat transfer model of two-dimensional slice type of slab casting mold has been established by using commercial finite element software ANSYS and the calculation of solidification and heat transfer in mold during casting process has been carried out by using heat transfer and stress/strain direct-coupling method to analyze the distribution of temperature in slab with casting rate 0. 95 ~ 1. 05 m/min of each steel and the thermal stress introduced by uneven temperature distribution. Commercial test results show that based on the calculation results

it is available to eliminate the longitudinal c

rack at comer of slab casting by 1

caster by improving the slab mold narrow face taper coefficient from original 1.00% to 1. 10%.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

A Study on Distribution Characteristics of Electromagnetic Field in Concasting Mould for Round Bloom

Model for Changing of MnO Content in Mold Flux during Concasting

Numerical Simulation of Flow Field in Mould for Slab Continuous Casting and Optimal Operation

A Study on Water Model for Structure Optimization of Submerged Entry Nozzle with Cross Outlet for Thin Slab Concasting

Numerical Simulation of Heat Transfer and Solidification of Liquid at Action of Flow Field in Mold for Slab

Related Author

王建军

周俐

李卫国

施晓芳

孙维

汪开忠

郭上型

苍大强

Related Institution

北京科技大学冶金与生态工程学院

安徽工业大学冶金与资源学院

武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室

辽宁科技大学材料与冶金学院

鞍钢集团朝阳鞍凌钢铁有限公司

⁰