Progress of Research on Composition Design and Heat Treatment Process of High Carbon Chromium Bearing Steel

张国宏; 张志成; 吴开明

您当前的位置：

首页 >

文章列表页 >

Progress of Research on Composition Design and Heat Treatment Process of High Carbon Chromium Bearing Steel

更新时间：2026-01-21

- Progress of Research on Composition Design and Heat Treatment Process of High Carbon Chromium Bearing Steel
- Special Steel Vol. 36, Issue 3, Pages: 9-13(2015)
- 作者机构：
  
  1. 耐火材料与冶金省部共建国家重点实验室，高性能钢铁材料及其应用湖北省协同创新中心，武汉科技大学国际钢铁研究院,武汉,430081
  2. 湖北新冶钢有限公司,黄石,435001
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：04 December 2014，
  
  Online First：17 August 2022，
  
  Published：17 August 2015
- 稿件说明：
移动端阅览
张国宏, 张志成, 吴开明. Progress of Research on Composition Design and Heat Treatment Process of High Carbon Chromium Bearing Steel[J]. Special Steel, 2015, 36(3): 9-13.
DOI：

张国宏, 张志成, 吴开明. Progress of Research on Composition Design and Heat Treatment Process of High Carbon Chromium Bearing Steel[J]. Special Steel, 2015, 36(3): 9-13. DOI：

摘要

叙述了高碳铬轴承钢中Mn、Si、Cr、Mo和Al含量及热处理工艺包括马氏体淬火-回火

贝氏体等温淬火、贝氏体-马氏体和马氏体-贝氏体淬火以及纳米贝氏体钢的研究进展。近10年发展的高强度、高塑性和高韧性的纳米贝氏体钢

因其由纳米尺寸的超细贝氏体铁素体板条和板条间富碳的残余奥氏体薄膜组成的特殊组织结构导致其在耐磨和接触疲劳性能方面也具有优越性

该纳米贝氏体轴承钢有良好的应用前景。

Abstract

The progress of research on Mn

Mo and Al content in high carbon chromium bearing steel

and heat treatment process including martensite quenching-tempering

bainite austempering

bainite-martensite and martensitebainite quenching

as well as nanometer-structured bainite steel for bearing are presented in this article. The nano-structured bainite with high strength

high plasticity and high impact toughness is developed in recent decade

the steel with special structure-nanometer ultra fine bainite ferrite lath and carbon-rich residual austenite film in steel has excellent wearing and contact fatigue properties

so the nano-bainite bearing steel has better application prospect.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of Heat Treatment on Mechanical Properties of High Strength Free-Cutting Precipitation Hardening Stainless Steel 2Cr16Ni3Mo2CuN

Advance in Research on Evolution of Structure in TRIP Steels during TMP and Heat Treatment

Development and Application of φ457 mm x 25.4 mm Large Size X65QO Seamless Steel Tube for Deep Subsea

Operation Practice of High Carbon Chromium Bearing Steel Produced by LD-LF+VD Process

Advance in Production Technology of Cold Rolled Grain-Oriented Electrical Steels

Related Author

高谦

高登攀

江志华

姜洪胜

许广鹏

李志

唐代明

田研

Related Institution

攀枝花学院四川省钒钛材料工程技术研究中心

湖南衡阳华菱钢管(集团)有限公司技术中心

中海石油(中国有限公司)海南分公司

北京科技大学冶金与生态工程学院

中咨工程建设监理公司总工办

⁰