A Study of Process on Spheroidizing Structure of Martensite Stainless Steel 3Cr17Mo Improved by Double Pre-Cooling Heat Treatment

马卫东; 马亿珠

您当前的位置：

首页 >

文章列表页 >

A Study of Process on Spheroidizing Structure of Martensite Stainless Steel 3Cr17Mo Improved by Double Pre-Cooling Heat Treatment

更新时间：2026-01-21

- A Study of Process on Spheroidizing Structure of Martensite Stainless Steel 3Cr17Mo Improved by Double Pre-Cooling Heat Treatment
- Special Steel Vol. 38, Issue 6, Pages: 63-66(2017)
- 作者机构：
  
  1. 黄河水利职业技术学院机械工程学院,开封,475004
  2. 国家建筑装修材料质量监督检验中心,郑州,450004
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：25 June 2017，
  
  Online First：15 July 2022，
  
  Published：15 July 2017
- 稿件说明：
移动端阅览
马卫东, 马亿珠. A Study of Process on Spheroidizing Structure of Martensite Stainless Steel 3Cr17Mo Improved by Double Pre-Cooling Heat Treatment[J]. Special Steel, 2017, 38(6): 63-66.
DOI：

马卫东, 马亿珠. A Study of Process on Spheroidizing Structure of Martensite Stainless Steel 3Cr17Mo Improved by Double Pre-Cooling Heat Treatment[J]. Special Steel, 2017, 38(6): 63-66. DOI：

摘要

针对退火3Cr17Mo钢（/%:0.25C

16.5Cr

0.60Mn

0.60Si

1.0Mo

0.020P

0.005S）碳化物偏聚现象

对预冷加热温度（870~960℃油冷至450℃）

预冷次数（1~4）

保温时间（1~4h）对该钢组织影响进行正交试验和离散数据分析

以研究反复预冷热处理对3Cr17Mo钢球化组织的影响。得出900~910℃两次预冷热处理可减少热处理时间和得出均匀细小碳化物组织。通过两次900~910℃30min油冷至450℃+730℃2h退火炉冷至400℃空冷的试验表明

预冷处理工艺较860℃4h

炉冷至500℃空冷的常规退火工艺钢中球化碳化物分布更均匀、细小

综合力学性能明显提高。

Abstract

According to the phenomenon of segregation and conglomeration of carbides in annealed steel 3Cr17Mo (/%: 0.25C

16.5Cr

0.60Mn

0.60Si

1.0Mo

0.020P

0.005S)

the orthogonal experiments and discrete data analysis on effect of pre-cooling heating temperature (870~960°C.

oil-cooling to 450℃)

pre-cooling times (1~4) and holding time (1~4h) on structure of steel have been carried out to study the effect of repeated pre-cooling heat treatment on spheroidizing structure of steel 3Cr17Mo. It is obtained that 900~910℃ double pre-cooling heat treatment is available to decrease the time of heat treatment and get structure with uniform and fine carbides. The test results show that as compared with normal annealing process-860°C for 4h

furnace cooling to 500℃

air cooling

the spheroidizing carbides in steel with double 900~910°C. for 30min

oil-cooling to 450℃+ annealing at 730℃ 2h and furnace cooling to 400°C air cooling is more uniform and fine

its comprehensive mechanical properties improve obviously.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Practice of Cold Drawing Process Optimization of GCr15 Bearing Steel Rod

Related Author

王莹莹

杨鹏远

Related Institution

东北特钢集团大连特殊钢有限责任公司

⁰